From: AMEER BASHA SHAIK <shaik.ameer@samsung.com>
To: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: "linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
Kukjin Kim <kgene.kim@samsung.com>,
"olofj@google.com" <olofj@google.com>,
PRASHANTH GODREHAL <prashanth.g@samsung.com>,
SUNIL JOSHI <joshi@samsung.com>,
"ameersk@gmail.com" <ameersk@gmail.com>,
Thomas P Abraham <thomas.ab@samsung.com>,
"devicetree-discuss@lists.ozlabs.org"
<devicetree-discuss@lists.ozlabs.org>
Subject: Re: Re: [PATCH 2/2] ARM: EXYNOS5: Add gscalar device from DT
Date: Wed, 11 Jul 2012 13:06:25 +0000 (GMT) [thread overview]
Message-ID: <24338044.529411342011985196.JavaMail.weblogic@epml01> (raw)
Hi Sylwester,
On Sat, Jul 7, 2012 at 12:20 AM, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> wrote:
>
> Hi Shaik,
>
>
> On 07/06/2012 02:45 PM, Shaik Ameer Basha wrote:
>>
>> Adding all 4 gscalar devices from DT device list in machine file.
>
>
> nit: s/gscalar/gscaler
>
> The above sentence doesn't quite parse though.
>
OK. I will fix it.
>
>> Signed-off-by: Abhilash Kesavan<a.kesavan@samsung.com>
>> Signed-off-by: Leela Krishna Amudala<l.krishna@samsung.com>
>> Signed-off-by: Shaik Ameer Basha<shaik.ameer@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos5250.dtsi | 31
>> +++++++++++++++++++++++++++++++
>> arch/arm/mach-exynos/mach-exynos5-dt.c | 8 ++++++++
>> 2 files changed, 39 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
>> b/arch/arm/boot/dts/exynos5250.dtsi
>> index 4272b29..b945c00 100644
>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> @@ -23,6 +23,13 @@
>> compatible = "samsung,exynos5250";
>> interrupt-parent =<&gic>;
>>
>> + aliases {
>> + gsc0 =&gsc_0;
>> + gsc1 =&gsc_1;
>> + gsc2 =&gsc_2;
>> + gsc3 =&gsc_3;
>> + };
>> +
>
>
> What are these aliases useful for ?
GScaler driver uses the "of_alias_get_id()" call to retrieve the device IDs, which
internally uses these aliases...
> Also I think all DT related patches should be posted to
> devicetree-discuss@lists.ozlabs.org as well.
>
I will post the v2 version of this patch to the specified mailing list.
>
>> gic:interrupt-controller@10481000 {
>> compatible = "arm,cortex-a9-gic";
>> #interrupt-cells =<3>;
>> @@ -424,4 +431,28 @@
>> #gpio-cells =<4>;
>> };
>> };
>> +
>> + gsc_0: gsc@0x13e00000 {
>> + compatible = "samsung,exynos-gsc";
>> + reg =<0x13e00000 0x1000>;
>> + interrupts =<0 85 0>;
>> + };
>> +
>> + gsc_1: gsc@0x13e10000 {
>> + compatible = "samsung,exynos-gsc";
>> + reg =<0x13e10000 0x1000>;
>> + interrupts =<0 86 0>;
>> + };
>> +
>> + gsc_2: gsc@0x13e20000 {
>> + compatible = "samsung,exynos-gsc";
>> + reg =<0x13e20000 0x1000>;
>> + interrupts =<0 87 0>;
>> + };
>> +
>> + gsc_3: gsc@0x13e30000 {
>> + compatible = "samsung,exynos-gsc";
>> + reg =<0x13e30000 0x1000>;
>> + interrupts =<0 88 0>;
>> + };
>> };
>> diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c
>> b/arch/arm/mach-exynos/mach-exynos5-dt.c
>> index 7b1e11a..76b081c 100644
>> --- a/arch/arm/mach-exynos/mach-exynos5-dt.c
>> +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
>> @@ -50,6 +50,14 @@ static const struct of_dev_auxdata
>> exynos5250_auxdata_lookup[] __initconst = {
>> OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0",
>> NULL),
>> OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1",
>> NULL),
>> OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2",
>> NULL),
>> + OF_DEV_AUXDATA("samsung,exynos-gsc", 0x13E00000,
>> + "exynos-gsc.0", NULL),
>> + OF_DEV_AUXDATA("samsung,exynos-gsc", 0x13E10000,
>> + "exynos-gsc.1", NULL),
>> + OF_DEV_AUXDATA("samsung,exynos-gsc", 0x13E20000,
>> + "exynos-gsc.2", NULL),
>> + OF_DEV_AUXDATA("samsung,exynos-gsc", 0x13E30000,
>> + "exynos-gsc.3", NULL),
>
>
> It's probably better to add relevant entry at
> arch/arm/mach-exynos/include/mach/map. It's just a one line, e.g.
>
> /* x = 0...3 */
> #define EXYNOS5_PA_GSC(x) (0x13e00000 + ((x) * 0x10000))
>
> And use it here instead of plain numbers.
OK. will address these comments in v2.
>
> --
> Thanks,
> Sylwester
Regards,
Shaik Ameer Basha
next reply other threads:[~2012-07-11 13:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-11 13:06 AMEER BASHA SHAIK [this message]
2012-07-11 18:12 ` [PATCH 2/2] ARM: EXYNOS5: Add gscalar device from DT Sylwester Nawrocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=24338044.529411342011985196.JavaMail.weblogic@epml01 \
--to=shaik.ameer@samsung.com \
--cc=ameersk@gmail.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olofj@google.com \
--cc=prashanth.g@samsung.com \
--cc=sylvester.nawrocki@gmail.com \
--cc=thomas.ab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).