From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: Peter Rosin <peda@axentia.se>,
linux-kernel@vger.kernel.org, Mark Rutland <mark.rutland@arm.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Jacopo Mondi <jacopo+renesas@jmondi.org>,
devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Russell King <linux@armlinux.org.uk>,
Rob Herring <robh+dt@kernel.org>,
Daniel Vetter <daniel.vetter@intel.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 6/7] drm/i2c: tda998x: split encoder and component functions from the work
Date: Fri, 20 Apr 2018 12:51:18 +0300 [thread overview]
Message-ID: <2442184.bXNxhGy9qM@avalon> (raw)
In-Reply-To: <20180419162751.25223-7-peda@axentia.se>
Hi Peter,
Thank you for the patch.
On Thursday, 19 April 2018 19:27:50 EEST Peter Rosin wrote:
> This enables reuse of the machinery for the case where a drm_bridge
> needs to do the same work via different interfaces.
>
> Signed-off-by: Peter Rosin <peda@axentia.se>
> ---
> drivers/gpu/drm/i2c/tda998x_drv.c | 46 ++++++++++++++++++++++++++++--------
> 1 file changed, 36 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c
> b/drivers/gpu/drm/i2c/tda998x_drv.c index 8f6e013f2b87..9c78f7bde49c 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -1163,9 +1163,8 @@ static int tda998x_connector_init(struct tda998x_priv
> *priv,
>
> /* DRM encoder functions */
>
> -static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
> +static void tda998x_dpms(struct tda998x_priv *priv, int mode)
I'd split this function into tda998x_enable() and tda998x_disable(), as the
DRM bridge API doesn't need to care about DPMS. The core of the driver would
then be DPMS-free.
Apart from that the patch looks good to me.
> {
> - struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
> bool on;
>
> /* we only care about on or off: */
> @@ -1195,12 +1194,18 @@ static void tda998x_encoder_dpms(struct drm_encoder
> *encoder, int mode) }
> }
>
> -static void
> -tda998x_encoder_mode_set(struct drm_encoder *encoder,
> - struct drm_display_mode *mode,
> - struct drm_display_mode *adjusted_mode)
> +static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
> {
> struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
> +
> + tda998x_dpms(priv, mode);
> +}
> +
> +static void
> +tda998x_mode_set(struct tda998x_priv *priv,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> u16 ref_pix, ref_line, n_pix, n_line;
> u16 hs_pix_s, hs_pix_e;
> u16 vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e;
> @@ -1407,6 +1412,16 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
> mutex_unlock(&priv->audio_mutex);
> }
>
> +static void
> +tda998x_encoder_mode_set(struct drm_encoder *encoder,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + struct tda998x_priv *priv = enc_to_tda998x_priv(encoder);
> +
> + tda998x_mode_set(priv, mode, adjusted_mode);
> +}
> +
> static void tda998x_destroy(struct tda998x_priv *priv)
> {
> /* disable all IRQs and free the IRQ handler */
> @@ -1653,11 +1668,10 @@ static void tda998x_set_config(struct tda998x_priv
> *priv, priv->audio_params = p->audio_params;
> }
>
> -static int tda998x_bind(struct device *dev, struct device *master, void
> *data)
> +static int tda998x_init(struct device *dev, struct drm_device *drm)
> {
> struct tda998x_encoder_params *params = dev->platform_data;
> struct i2c_client *client = to_i2c_client(dev);
> - struct drm_device *drm = data;
> struct tda998x_priv *priv;
> u32 crtcs = 0;
> int ret;
> @@ -1705,8 +1719,7 @@ static int tda998x_bind(struct device *dev, struct
> device *master, void *data) return ret;
> }
>
> -static void tda998x_unbind(struct device *dev, struct device *master,
> - void *data)
> +static void tda998x_fini(struct device *dev)
> {
> struct tda998x_priv *priv = dev_get_drvdata(dev);
>
> @@ -1715,6 +1728,19 @@ static void tda998x_unbind(struct device *dev, struct
> device *master, tda998x_destroy(priv);
> }
>
> +static int tda998x_bind(struct device *dev, struct device *master, void
> *data)
> +{
> + struct drm_device *drm = data;
> +
> + return tda998x_init(dev, drm);
> +}
> +
> +static void tda998x_unbind(struct device *dev, struct device *master,
> + void *data)
> +{
> + tda998x_fini(dev);
> +}
> +
> static const struct component_ops tda998x_ops = {
> .bind = tda998x_bind,
> .unbind = tda998x_unbind,
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2018-04-20 9:51 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-19 16:27 [PATCH v3 0/7] Add tda998x (HDMI) support to atmel-hlcdc Peter Rosin
2018-04-19 16:27 ` [PATCH v3 1/7] dt-bindings: display: bridge: lvds-transmitter: add ti,ds90c185 Peter Rosin
2018-04-19 16:27 ` [PATCH v3 2/7] dt-bindings: display: atmel: optional video-interface of endpoints Peter Rosin
2018-04-19 16:27 ` [PATCH v3 3/7] drm: of: introduce drm_of_media_bus_fmt Peter Rosin
2018-04-19 16:27 ` [PATCH v3 4/7] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes Peter Rosin
2018-04-21 16:19 ` Boris Brezillon
2018-04-21 22:13 ` Peter Rosin
2018-04-19 16:27 ` [PATCH v3 5/7] drm/i2c: tda998x: find the drm_device via the drm_connector Peter Rosin
2018-04-20 9:41 ` Laurent Pinchart
2018-04-19 16:27 ` [PATCH v3 6/7] drm/i2c: tda998x: split encoder and component functions from the work Peter Rosin
2018-04-20 9:51 ` Laurent Pinchart [this message]
2018-04-19 16:27 ` [PATCH v3 7/7] drm/i2c: tda998x: register as a drm bridge Peter Rosin
2018-04-20 10:06 ` Laurent Pinchart
2018-04-20 10:24 ` Russell King - ARM Linux
2018-04-20 13:28 ` Peter Rosin
2018-04-20 10:41 ` kbuild test robot
2018-04-20 10:49 ` Peter Rosin
2018-04-20 10:53 ` Russell King - ARM Linux
2018-04-20 13:09 ` Peter Rosin
2018-04-20 12:00 ` Russell King - ARM Linux
2018-04-20 8:52 ` [PATCH v3 0/7] Add tda998x (HDMI) support to atmel-hlcdc jacopo mondi
2018-04-20 10:18 ` Laurent Pinchart
2018-04-20 11:05 ` Peter Rosin
2018-04-20 11:38 ` jacopo mondi
2018-04-20 12:55 ` Peter Rosin
2018-04-21 8:38 ` Laurent Pinchart
2018-04-21 15:05 ` Peter Rosin
2018-04-20 11:22 ` jacopo mondi
2018-04-21 8:20 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2442184.bXNxhGy9qM@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=airlied@linux.ie \
--cc=alexandre.belloni@bootlin.com \
--cc=boris.brezillon@free-electrons.com \
--cc=daniel.vetter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jacopo+renesas@jmondi.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@microchip.com \
--cc=peda@axentia.se \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox