Re: [PATCH v2 4/6] arm64: dts: qcom: sm8750: Add UFS nodes for SM8750 SoC

[Melody Olvera <quic_molvera@quicinc.com>]

On 3/17/2025 10:28 PM, Manivannan Sadhasivam wrote:
> On Mon, Mar 10, 2025 at 02:12:32PM -0700, Melody Olvera wrote:
>> From: Nitin Rawat <quic_nitirawa@quicinc.com>
>>
>> Add UFS host controller and PHY nodes for SM8750 SoC.
>>
>> Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
>> Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
>> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sm8750.dtsi | 106 +++++++++++++++++++++++++++++++++++
>>   1 file changed, 106 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
>> index 529e4e4e1d0ea9e99e89c12d072e27c45091f29e..72f69e717ce049bb0c524aa389d837ecd1459535 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
>> @@ -13,6 +13,7 @@
>>   #include <dt-bindings/power/qcom,rpmhpd.h>
>>   #include <dt-bindings/power/qcom-rpmpd.h>
>>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/gpio/gpio.h>
> Sort includes alphabetically.

Ack.

>
>>   
>>   / {
>>   	interrupt-parent = <&intc>;
>> @@ -2675,6 +2676,111 @@ gic_its: msi-controller@16040000 {
>>   			};
>>   		};
>>   
>> +		ufs_mem_phy: phy@1d80000 {
>> +			compatible = "qcom,sm8750-qmp-ufs-phy";
>> +			reg = <0 0x01d80000 0 0x2000>;
> Use 0x0 for consistency.

Ack.

>
>> +
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
>> +				<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
>> +				 <&tcsrcc TCSR_UFS_CLKREF_EN>;
> Please align the clocks.

Ack.

>
>> +
>> +			clock-names = "ref",
>> +				      "ref_aux",
>> +				      "qref";
>> +
>> +			resets = <&ufs_mem_hc 0>;
>> +			reset-names = "ufsphy";
>> +
>> +			power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>;
>> +
>> +			#clock-cells = <1>;
>> +			#phy-cells = <0>;
>> +
>> +			status = "disabled";
>> +			};
> Here too.

I'm assuming you mean the curly brace; ack.

>
>> +
>> +		ufs_mem_hc: ufs@1d84000 {
>> +			compatible = "qcom,sm8750-ufshc",
>> +				     "qcom,ufshc",
>> +				     "jedec,ufs-2.0";
> Compatibles can be ordered in the same line.

Ack.

>
>> +			reg = <0 0x01d84000 0 0x3000>;
> 0x0

Ack.

>
>> +
>> +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
>> +				 <&gcc GCC_UFS_PHY_AHB_CLK>,
>> +				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
>> +				 <&rpmhcc RPMH_LN_BB_CLK3>,
>> +				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
>> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
>> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
>> +			clock-names = "core_clk",
>> +				      "bus_aggr_clk",
>> +				      "iface_clk",
>> +				      "core_clk_unipro",
>> +				      "ref_clk",
>> +				      "tx_lane0_sync_clk",
>> +				      "rx_lane0_sync_clk",
>> +				      "rx_lane1_sync_clk";
>> +
>> +			operating-points-v2 = <&ufs_opp_table>;
>> +
>> +			resets = <&gcc GCC_UFS_PHY_BCR>;
>> +			reset-names = "rst";
>> +
>> +			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
>> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
>> +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
>> +					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
>> +			interconnect-names = "ufs-ddr",
>> +					     "cpu-ufs";
>> +
>> +			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
>> +			required-opps = <&rpmhpd_opp_nom>;
>> +
>> +			iommus = <&apps_smmu 0x60 0>;
>> +			dma-coherent;
>> +
>> +			lanes-per-direction = <2>;
>> +
>> +			phys = <&ufs_mem_phy>;
>> +			phy-names = "ufsphy";
>> +
>> +			#reset-cells = <1>;
>> +
>> +			status = "disabled";
>> +
> Extra newline

Will remove.

Thanks,
Melody