Re: Re: [linux-sunxi] [PATCH] arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS

["Jernej Škrabec" <jernej.skrabec@siol.net>]

Dne ponedeljek, 12. april 2021 ob 19:41:25 CEST je Michael Weiser napisal(a):
> Hi Andre, ChenYu,
> 
> On Mon, Apr 12, 2021 at 05:45:58PM +0100, Andre Przywara wrote:
> > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> > > > index e79ce49e7e6a..843338e19694 100644
> > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> > > > @@ -21,5 +21,5 @@
> > > >  };
> > > >
> > > >  &mmc0 {
> > > > -       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 push-push switch 
*/
> > > > +       non-removable;          /* card detect is broken on some 
boards */  
> > > 
> > > So a revert is good, but has anyone tried using the "broken-cd" instead?
> > Ha, that's a good idea, I totally forgot about this property!
> 
> > > That way, at least on Linux, the mmc core resorts to polling for a card.
> > > At least this way the card is still removable.
> > Yes indeed, I tested it on my "stuck at 1" Pine64-LTS, and it works like
> > a charm!
> 
> > Daniel, Michael, can you test this on your boards? So removing the
> > cd-gpios property, and adding "broken-cd;" instead?
> 
> Yes, it works fine. What flummoxed me at first was that obviously I also
> have to disable the ACTIVE_LOW definition in sun50i-a64-sopine.dtsi
> after having added and disabled an ACTIVE_HIGH definition in
> sun50i-a64-pine64-lts.dts.
> 
> BTW: My boards have a marking "PINE64-R18-V1_1" and below it
> "2017-08-03" on their upper side. On the back it says on one sticker
> "Model:PineA64 2GB LTS" and on another "2O1-PINE64R18-00" and
> "PINE64-R18-V1.1 2G". Is CD being stuck at 1 a bug of revision 1.0
> perhaps?  Is there a way to detect this difference in software and add
> some sort of quirk handler for it?

This is job for bootloader (U-Boot) which can patch DT. Most Allwinner boards 
have no reliable way to be distinguished, except from Olimex. So I would say 
it's not possible.

Best regards,
Jernej