From: "Andrew Jeffery" <andrew@aj.id.au>
To: "Alexander A. Filippov" <a.filippov@yadro.com>,
linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Joel Stanley <joel@jms.id.au>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] ARM: dts: aspeed: Add YADRO VESNIN BMC
Date: Mon, 03 Jun 2019 10:58:47 +0930 [thread overview]
Message-ID: <246c9b25-1c05-4c2f-9185-c438c97ebdec@www.fastmail.com> (raw)
In-Reply-To: <20190531090950.13466-1-a.filippov@yadro.com>
On Fri, 31 May 2019, at 18:40, Alexander Filippov wrote:
> VESNIN is an OpenPower machine with an Aspeed 2400 BMC SoC manufactured
> by YADRO.
>
> Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 224 ++++++++++++++++++++
> 2 files changed, 225 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index dab2914fa293..64a956372fe1 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1272,6 +1272,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-opp-lanyang.dtb \
> aspeed-bmc-opp-palmetto.dtb \
> aspeed-bmc-opp-romulus.dtb \
> + aspeed-bmc-opp-vesnin.dtb \
> aspeed-bmc-opp-witherspoon.dtb \
> aspeed-bmc-opp-zaius.dtb \
> aspeed-bmc-portwell-neptune.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
> b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
> new file mode 100644
> index 000000000000..0b9e29c3212e
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
> @@ -0,0 +1,224 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright 2019 YADRO
> +/dts-v1/;
> +
> +#include "aspeed-g4.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "Vesnin BMC";
> + compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory {
> + reg = <0x40000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vga_memory: framebuffer@5f000000 {
> + no-map;
> + reg = <0x5f000000 0x01000000>; /* 16MB */
> + };
> + flash_memory: region@5c000000 {
> + no-map;
> + reg = <0x5c000000 0x02000000>; /* 32M */
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + heartbeat {
> + gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
> + };
> + power_red {
> + gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
> + };
> +
> + id_blue {
> + gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
> + };
> +
> + alarm_red {
> + gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
> + };
> +
> + alarm_yel {
> + gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + button_checkstop {
> + label = "checkstop";
> + linux,code = <74>;
> + gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + button_identify {
> + label = "identify";
> + linux,code = <152>;
> + gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1debug_default>;
> +
> + flash@0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + };
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + use-ncsi;
> + no-hw-checksum;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> +};
> +
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> + memory-region = <&flash_memory>;
> + flash = <&spi>;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + pagesize = <64>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + tmp75@49 {
> + compatible = "ti,tmp75";
> + reg = <0x49>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + occ-hwmon@50 {
> + compatible = "ibm,p8-occ-hwmon";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + occ-hwmon@51 {
> + compatible = "ibm,p8-occ-hwmon";
> + reg = <0x51>;
> + };
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + w83795g@2f {
> + compatible = "nuvoton,w83795g";
> + reg = <0x2f>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + occ-hwmon@56 {
> + compatible = "ibm,p8-occ-hwmon";
> + reg = <0x56>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> +};
> +
> +&i2c10 {
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + occ-hwmon@57 {
> + compatible = "ibm,p8-occ-hwmon";
> + reg = <0x57>;
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> +
> + rtc@68 {
> + compatible = "maxim,ds3231";
> + reg = <0x68>;
> + };
> +};
> +
> +&i2c13 {
> + status = "okay";
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> --
> 2.20.1
>
>
next prev parent reply other threads:[~2019-06-03 1:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 9:09 [PATCH v4] ARM: dts: aspeed: Add YADRO VESNIN BMC Alexander Filippov
2019-06-03 1:28 ` Andrew Jeffery [this message]
2019-06-03 8:04 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=246c9b25-1c05-4c2f-9185-c438c97ebdec@www.fastmail.com \
--to=andrew@aj.id.au \
--cc=a.filippov@yadro.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).