From: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: "Rob Herring" <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-omap <linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Subject: Re: [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree
Date: Thu, 05 Jan 2017 18:48:38 +0200 [thread overview]
Message-ID: <2557392.58vudoaMIY@avalon> (raw)
In-Reply-To: <20170105163928.GD4310-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Hello,
On Thursday 05 Jan 2017 08:39:29 Tony Lindgren wrote:
> * Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [170105 08:28]:
> > On Fri, Dec 2, 2016 at 3:11 PM, Laurent Pinchart wrote:
> >> The Beagleboard-xM has a LAN9514 USB hub and ethernet controller,
> >> connected to port 2 of the OMAP EHCI controller. The board however has
> >> no EEPROM to store the ethernet MAC address, which is programmed by the
> >> boot loader.
> >>
> >> To allow Linux to use the same MAC address as the boot loader (or for
> >> that matter any fixed MAC address), we need a node in the device tree
> >> for the ethernet controller that the boot loader can update at runtime
> >> with a local-mac-address property. Add it, along with an alias for the
> >> ethernet controller to let the boot loader locate it easily.
> >>
> >> Signed-off-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
> >> ---
> >> Changes since v1:
> >>
> >> - Renamed usb2 DT node to hub
> >> ---
> >>
> >> arch/arm/boot/dts/omap3-beagle-xm.dts | 16 ++++++++++++++++
> >> 1 file changed, 16 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts
> >> b/arch/arm/boot/dts/omap3-beagle-xm.dts index
> >> 85e297ed0ea1..673cee2234b2 100644
> >> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> >> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> >> @@ -27,6 +27,7 @@
> >> aliases {
> >> display0 = &dvi0;
> >> display1 = &tv0;
> >> + ethernet = ðernet;
> >
> > Sorry, just noticed this, but this should be dropped. It's not used
> > nor do we want an alias here.
>
> OK, will update locally as I have not pushed out yet.
The ethernet alias is used by U-Boot to locate the ethernet controller and
update the MAC address.
> > P.S. The display ones are questionable, too. Only OMAP has them and
> > per platform alias names is not something we want.
>
> OK. What about the mmc ones? Otherwise the MMC devices keep moving
> around depending on the kernel version..
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-01-05 16:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-02 21:11 [PATCH v2] ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree Laurent Pinchart
[not found] ` <1480713097-5931-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
2017-01-05 16:19 ` Tony Lindgren
2017-01-05 16:27 ` Rob Herring
[not found] ` <CAL_Jsq+M7RWiytEA7zPZvR+7CK37WCxN5ZBOQkpjdswjLHL4fA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-05 16:39 ` Tony Lindgren
[not found] ` <20170105163928.GD4310-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-01-05 16:48 ` Laurent Pinchart [this message]
2017-01-05 16:51 ` Tony Lindgren
2017-01-05 18:50 ` Rob Herring
[not found] ` <CAL_JsqKQLd2SFNVKwZDPTKL-spWknEe5aFDT5RZoCnV1qOP=4Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-06 16:49 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2557392.58vudoaMIY@avalon \
--to=laurent.pinchart-rylnwiuwjnjg/c1bvhzhaw@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).