devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: <arnd@arndb.de>, <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>, <soc@kernel.org>,
	Stephen Boyd <sboyd@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-kernel@vger.kernel.org>, Marek Vasut <marex@denx.de>,
	Ahmad Fatoum <a.fatoum@pengutronix.de>, <etienne.carriere@st.com>
Subject: Re: [PATCH 0/8] Add SCMI version of ST boards
Date: Tue, 3 May 2022 16:51:38 +0200	[thread overview]
Message-ID: <25ed3a16-c277-5170-3feb-51484f744de1@foss.st.com> (raw)
In-Reply-To: <20220422150952.20587-1-alexandre.torgue@foss.st.com>

On 4/22/22 17:09, Alexandre Torgue wrote:
> The aim of this series is to add OPTEE and SCMI support for STM32 boards in
> order to enable secure services for clocks and resets. New boards have been added
> to enable this support in order to not break boot of current STM32 boards users.
> 
> This series targets only boards provided by ST which are:
> -STM32MP157A-DK1
> -STM32MP157C-DK2
> -STM32MP157C-ED1
> -STM32MP157C-EV1
> 
> Some modifications in bindings files (yaml and .h) was needed and OPTEE/TEE
> configs are now enabled by default for ARCH_STM32 architecture.
> 
> Note that patch [1] "dt-bindings: rcc: Add optional external ethernet RX clock
> properties" done by Marek has been already merged in Rob tree.
> 
> Thanks
> Alex
> 
> Alexandre Torgue (7):
>    dt-bindings: clock: stm32mp1: describes clocks if
>      "st,stm32mp1-rcc-secure"
>    dt-bindings: clock: stm32mp15: rename CK_SCMI define
>    dt-bindings: reset: stm32mp15: rename RST_SCMI define
>    ARM: stm32: select OPTEE on MPU family
>    ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
>    dt-bindings: arm: stm32: Add SCMI version of STM32 boards
>      (DK1/DK2/ED1/EV1)
>    ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
> 
> Marek Vasut (1):
>    dt-bindings: rcc: Add optional external ethernet RX clock properties
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |  17 +++
>   .../bindings/clock/st,stm32mp1-rcc.yaml       |  34 ++++++
>   arch/arm/boot/dts/Makefile                    |   4 +
>   arch/arm/boot/dts/stm32mp151.dtsi             |  41 +++++++
>   arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts    |  86 +++++++++++++++
>   arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts    |  95 +++++++++++++++++
>   arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts    |  91 ++++++++++++++++
>   arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts    | 100 ++++++++++++++++++
>   arch/arm/mach-stm32/Kconfig                   |   2 +
>   include/dt-bindings/clock/stm32mp1-clks.h     |  46 ++++----
>   include/dt-bindings/reset/stm32mp1-resets.h   |  24 ++---
>   11 files changed, 503 insertions(+), 37 deletions(-)
>   create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
> 

Series applied on stm32-next. Patch[5] has been dropped.

Alex

      parent reply	other threads:[~2022-05-03 14:52 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-22 15:09 [PATCH 0/8] Add SCMI version of ST boards Alexandre Torgue
2022-04-22 15:09 ` [PATCH 1/8] dt-bindings: rcc: Add optional external ethernet RX clock properties Alexandre Torgue
2022-04-22 16:28   ` Marek Vasut
2022-04-25 17:21     ` Alexandre TORGUE
2022-04-22 15:09 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure" Alexandre Torgue
2022-04-22 16:31   ` Marek Vasut
2022-04-25 19:11     ` Rob Herring
2022-04-25 19:35       ` Marek Vasut
2022-04-26 18:44         ` Rob Herring
2022-05-02 21:13   ` Rob Herring
     [not found]   ` <CAL_JsqKU28BNrozg20_a_XMUmBhaoDHdodWkzyRoH=VcM2pDjg@mail.gmail.com>
2022-05-06 10:02     ` Alexandre TORGUE
     [not found]       ` <CAL_JsqK5ox681qQFz6b4a8eSaNHJ08XmB2bTE=EZ2Pch0YDJqA@mail.gmail.com>
     [not found]         ` <CAL_JsqKfA1joqDiophO4qk0S1XfgxE2EWUBrxqXrGdfjOAe=ew@mail.gmail.com>
2022-05-09 12:55           ` Alexandre TORGUE
2022-04-22 15:09 ` [PATCH 3/8] dt-bindings: clock: stm32mp15: rename CK_SCMI define Alexandre Torgue
2022-05-02 21:26   ` Rob Herring
2022-04-22 15:09 ` [PATCH 4/8] dt-bindings: reset: stm32mp15: rename RST_SCMI define Alexandre Torgue
2022-05-02 21:27   ` Rob Herring
2022-04-22 15:09 ` [PATCH 5/8] ARM: stm32: select OPTEE on MPU family Alexandre Torgue
2022-04-22 15:37   ` Ahmad Fatoum
2022-04-22 16:23     ` Alexandre TORGUE
2022-04-22 15:09 ` [PATCH 6/8] ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15 Alexandre Torgue
2022-04-22 16:32   ` Marek Vasut
2022-04-25 10:19     ` Etienne CARRIERE
2022-04-25 10:25       ` Marek Vasut
2022-04-25 10:30         ` Rouven Czerwinski
2022-04-22 15:09 ` [PATCH 7/8] dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) Alexandre Torgue
2022-05-02 21:28   ` Rob Herring
2022-04-22 15:09 ` [PATCH 8/8] ARM: dts: " Alexandre Torgue
2022-05-03 14:51 ` Alexandre TORGUE [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=25ed3a16-c277-5170-3feb-51484f744de1@foss.st.com \
    --to=alexandre.torgue@foss.st.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=etienne.carriere@st.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=marex@denx.de \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).