From: Detlev Casanova <detlev.casanova@collabora.com>
To: linux-kernel@vger.kernel.org, Quentin Schulz <quentin.schulz@cherry.de>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Alexey Charkov <alchark@gmail.com>,
Cristian Ciocaltea <cristian.ciocaltea@collabora.com>,
Dragan Simic <dsimic@manjaro.org>,
Jianfeng Liu <liujianfeng1994@gmail.com>,
Niklas Cassel <cassel@kernel.org>,
FUKAUMI Naoki <naoki@radxa.com>,
Kever Yang <kever.yang@rock-chips.com>,
Johan Jonker <jbx6244@gmail.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Algea Cao <algea.cao@rock-chips.com>,
Chen-Yu Tsai <wens@csie.org>,
Sugar Zhang <sugar.zhang@rock-chips.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
dri-devel@lists.freedesktop.org, kernel@collabora.com
Subject: Re: [PATCH v5 2/3] arm64: dts: rockchip: Add HDMI0 audio output for rk3588 SoC
Date: Thu, 06 Feb 2025 12:17:51 -0500 [thread overview]
Message-ID: <2781606.mvXUDI8C0e@earth> (raw)
In-Reply-To: <bfe9cb98-12ba-484c-95af-e5842edaab76@cherry.de>
On Tuesday, 4 February 2025 05:14:37 EST Quentin Schulz wrote:
> Hi Detlev,
>
> On 2/3/25 6:16 PM, Detlev Casanova wrote:
> > Use the simple-audio-card driver with the hdmi0 QP node as CODEC and
> > the i2s5 device as CPU.
> >
> > The simple-audio-card,mclk-fs value is set to 128 as it is done in
> > the downstream driver.
> >
> > The #sound-dai-cells value is set to 0 in the hdmi0 node so that it can be
> > used as an audio codec node.
> >
> > Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
> > ---
> >
> > arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 17 +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
> > b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index
> > 8cfa30837ce72..767bdfc06b7ec 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
> > @@ -1369,6 +1369,22 @@ i2s9_8ch: i2s@fddfc000 {
> >
> > status = "disabled";
> >
> > };
> >
> > + hdmi0_sound: hdmi0-sound {
> > + compatible = "simple-audio-card";
> > + simple-audio-card,format = "i2s";
> > + simple-audio-card,mclk-fs = <128>;
> > + simple-audio-card,name = "hdmi0";
> > + status = "disabled";
> > +
> > + simple-audio-card,codec {
> > + sound-dai = <&hdmi0>;
> > + };
> > +
> > + simple-audio-card,cpu {
> > + sound-dai = <&i2s5_8ch>;
> > + };
> > + };
> > +
>
> This is an address/bus-less device, so I believe it needs to be put
> among other address/bus-less devices, which for Rockchip SoCs is at the
> top of the DT? c.f.
> https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.
> html
>
> **I** would put it between the firmware and the pmu-a55 nodes.
I wasn't sure about this. It makes sense to move it with address-less devices,
but the rk3399 device tree has it above the hdmi node, so I wanted to stay
consistent with that.
> Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3588 Tiger Haikou
>
> Thanks!
> Quentin
next prev parent reply other threads:[~2025-02-06 17:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-03 17:16 [PATCH v5 0/3] Add HDMI audio on the rk3588 SoC Detlev Casanova
2025-02-03 17:16 ` [PATCH v5 1/3] drm/bridge: synopsys: Add audio support for dw-hdmi-qp Detlev Casanova
2025-02-04 9:59 ` Quentin Schulz
2025-02-06 20:40 ` Detlev Casanova
2025-02-07 8:46 ` Quentin Schulz
2025-02-03 17:16 ` [PATCH v5 2/3] arm64: dts: rockchip: Add HDMI0 audio output for rk3588 SoC Detlev Casanova
2025-02-04 10:14 ` Quentin Schulz
2025-02-06 17:17 ` Detlev Casanova [this message]
2025-02-07 10:23 ` Heiko Stübner
2025-02-03 17:16 ` [PATCH v5 3/3] arm64: dts: rockchip: Enable HDMI0 audio output for Rock 5B Detlev Casanova
2025-02-04 10:15 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2781606.mvXUDI8C0e@earth \
--to=detlev.casanova@collabora.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=alchark@gmail.com \
--cc=algea.cao@rock-chips.com \
--cc=andrzej.hajda@intel.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cristian.ciocaltea@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=dsimic@manjaro.org \
--cc=geert+renesas@glider.be \
--cc=heiko@sntech.de \
--cc=jbx6244@gmail.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel@collabora.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=liujianfeng1994@gmail.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=naoki@radxa.com \
--cc=neil.armstrong@linaro.org \
--cc=quentin.schulz@cherry.de \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=simona@ffwll.ch \
--cc=sugar.zhang@rock-chips.com \
--cc=tzimmermann@suse.de \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).