devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH 5/6] pinctrl: rockchip: support unrouted iomuxes per bank
Date: Mon, 16 Jun 2014 01:37:49 +0200	[thread overview]
Message-ID: <2829145.SDmgcPOrPP@diego> (raw)
In-Reply-To: <1887108.ECBDVhibgn@diego>

On the upcoming RK3288 SoC contain some unrouted pins in their banks. So while
for example pin8 of bank5 stays pin8 with all its settings (register offset etc),
pins 0 to 7 are not routed outside the SoC at all.
Therefore add a flag to mark these unrouted iomuxes to prevent people from using
them.

Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
 drivers/pinctrl/pinctrl-rockchip.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 115c75d..c8920f5 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -70,6 +70,7 @@ enum rockchip_pinctrl_type {
 #define IOMUX_GPIO_ONLY		BIT(0)
 #define IOMUX_WIDTH_4BIT	BIT(1)
 #define IOMUX_SOURCE_PMU	BIT(2)
+#define IOMUX_UNROUTED		BIT(3)
 
 /**
  * @type: iomux variant using IOMUX_* constants
@@ -386,6 +387,11 @@ static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)
 	if (iomux_num > 3)
 		return -EINVAL;
 
+	if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
+		dev_err(info->dev, "pin %d is unrouted\n", pin);
+		return -EINVAL;
+	}
+
 	if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
 		return RK_FUNC_GPIO;
 
@@ -436,6 +442,11 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	if (iomux_num > 3)
 		return -EINVAL;
 
+	if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
+		dev_err(info->dev, "pin %d is unrouted\n", pin);
+		return -EINVAL;
+	}
+
 	if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) {
 		if (mux != RK_FUNC_GPIO) {
 			dev_err(info->dev,
-- 
1.9.0


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-06-15 23:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-15 23:35 [PATCH 0/6] pinctrl: rockchip: support rk3288 Heiko Stübner
2014-06-15 23:36 ` [PATCH 1/6] pinctrl: rockchip: generalize bank-quirks Heiko Stübner
2014-06-15 23:36 ` [PATCH 2/6] pinctrl: rockchip: precalculate iomux offsets Heiko Stübner
2014-06-15 23:36 ` [PATCH 3/6] pinctrl: rockchip: add support for 4bit wide iomux settings Heiko Stübner
2014-06-15 23:37 ` [PATCH 4/6] pinctrl: rockchip: enable iomuxes from pmu space Heiko Stübner
2014-06-15 23:37 ` Heiko Stübner [this message]
2014-06-15 23:38 ` [PATCH 6/6] pinctrl: rockchip: add support for rk3288 pin-controller Heiko Stübner
2014-07-07 10:41 ` [PATCH 0/6] pinctrl: rockchip: support rk3288 Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2829145.SDmgcPOrPP@diego \
    --to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).