From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Vidya Sagar <vidyas@nvidia.com>,
bhelgaas@google.com, lorenzo.pieralisi@arm.com,
robh+dt@kernel.org, thierry.reding@gmail.com,
jonathanh@nvidia.com
Cc: kishon@ti.com, vkoul@kernel.org, kw@linux.com,
p.zabel@pengutronix.de, mperttunen@nvidia.com,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org, kthota@nvidia.com,
mmaddireddy@nvidia.com, sagar.tv@gmail.com
Subject: Re: [PATCH V3 05/11] arm64: tegra: Add regulators required for PCIe
Date: Wed, 29 Jun 2022 08:34:38 +0200 [thread overview]
Message-ID: <291c1ff5-f864-3a8b-d151-d2ec805c8e5d@linaro.org> (raw)
In-Reply-To: <20220629060435.25297-6-vidyas@nvidia.com>
On 29/06/2022 08:04, Vidya Sagar wrote:
> Add regulator supplies required for PCIe functionality. The supplies
> include 1.8V, 3.3V and 12V.
>
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
> V3:
> * New patch in this series
>
> .../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 24 +++++++++++++++++++
> .../boot/dts/nvidia/tegra234-p3737-0000.dtsi | 23 ++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
> index 798de9226ba5..d53901ba45f6 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
> @@ -6,6 +6,30 @@
> model = "NVIDIA Jetson AGX Orin";
> compatible = "nvidia,p3701-0000", "nvidia,tegra234";
>
> + fixed-regulators {
> + compatible = "simple-bus";
> + device_type = "fixed-regulators";
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
This is not a bus, fixed regulators are not part of some bus.
> +
> + p3701_vdd_1v8_ls: regulator@3 {
> + compatible = "regulator-fixed";
> + reg = <3>;
This fails schema. No.
> + regulator-name = "vdd-1v8-ls-sw5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
Missing blank line.
> + p3701_vdd_AO_1v8: regulator@5 {
> + compatible = "regulator-fixed";
> + reg = <5>;
> + regulator-name = "vdd-AO-1v8-sw2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> + };
> +
> bus@0 {
> spi@3270000 {
> status = "okay";
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
> index a85993c85e45..bb503643dd38 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
> @@ -2,4 +2,27 @@
>
> / {
> compatible = "nvidia,p3737-0000";
> +
> + fixed-regulators {
> + p3737_vdd_3v3_pcie: regulator@105 {
> + compatible = "regulator-fixed";
> + reg = <105>;
> + regulator-name = "vdd-3v3-pcie";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio TEGRA234_MAIN_GPIO(Z, 2) 0>;
> + enable-active-high;
> + regulator-boot-on;
> + };
Same comments.
> + p3737_vdd_12v_pcie: regulator@114 {
> + compatible = "regulator-fixed";
> + reg = <114>;
> + regulator-name = "vdd-12v-pcie";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) 1>;
> + regulator-boot-on;
> + enable-active-low;
> + };
> + };
> };
Best regards,
Krzysztof
next prev parent reply other threads:[~2022-06-29 6:34 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-29 6:04 [PATCH V3 00/11] PCI: tegra: Add Tegra234 PCIe support Vidya Sagar
2022-06-29 6:04 ` [PATCH V3 01/11] dt-bindings: PHY: P2U: Add support for Tegra234 P2U block Vidya Sagar
2022-07-05 6:14 ` Vinod Koul
2022-06-29 6:04 ` [PATCH V3 02/11] dt-bindings: pci: tegra: Convert to json-schema Vidya Sagar
2022-06-29 6:29 ` Krzysztof Kozlowski
2022-07-06 9:51 ` Vidya Sagar
2022-07-06 9:58 ` Krzysztof Kozlowski
2022-06-30 21:04 ` Rob Herring
2022-07-06 9:53 ` Vidya Sagar
2022-07-06 10:06 ` Krzysztof Kozlowski
2022-07-06 10:46 ` Vidya Sagar
2022-07-06 15:06 ` Krzysztof Kozlowski
2022-07-06 18:11 ` Rob Herring
2022-06-29 6:04 ` [PATCH V3 03/11] dt-bindings: PCI: tegra234: Add schema for tegra234 rootport mode Vidya Sagar
2022-06-29 6:32 ` Krzysztof Kozlowski
2022-06-29 6:04 ` [PATCH V3 04/11] dt-bindings: PCI: tegra234: Add schema for tegra234 endpoint mode Vidya Sagar
2022-06-29 6:33 ` Krzysztof Kozlowski
2022-06-29 6:04 ` [PATCH V3 05/11] arm64: tegra: Add regulators required for PCIe Vidya Sagar
2022-06-29 6:34 ` Krzysztof Kozlowski [this message]
2022-06-29 6:04 ` [PATCH V3 06/11] arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT Vidya Sagar
2022-06-29 6:35 ` Krzysztof Kozlowski
2022-06-29 6:04 ` [PATCH V3 07/11] arm64: tegra: Enable PCIe slots in P3737-0000 board Vidya Sagar
2022-06-29 6:04 ` [PATCH V3 08/11] phy: tegra: Add PCIe PIPE2UPHY support for Tegra234 Vidya Sagar
2022-07-05 6:15 ` Vinod Koul
2022-06-29 6:04 ` [PATCH V3 09/11] PCI: Disable MSI for Tegra234 root ports Vidya Sagar
2022-06-29 6:04 ` [PATCH V3 10/11] Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" Vidya Sagar
2022-06-29 6:04 ` [PATCH V3 11/11] PCI: tegra: Add Tegra234 PCIe support Vidya Sagar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=291c1ff5-f864-3a8b-d151-d2ec805c8e5d@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=kthota@nvidia.com \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mmaddireddy@nvidia.com \
--cc=mperttunen@nvidia.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sagar.tv@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=vidyas@nvidia.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).