Re: [PATCH v14 3/6] arm64: dts: mt8195: Add efuse node to mt8195

[Matthias Brugger <matthias.bgg@gmail.com>]

On 09/02/2023 11:56, bchihi@baylibre.com wrote:
> From: Balsam CHIHI <bchihi@baylibre.com>
> 
> Add efuse node.
> This will be required by the thermal driver to get the calibration data.
> 
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Link: https://lore.kernel.org/r/20230124131717.128660-4-bchihi@baylibre.com
> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This patch is already accepted [1], please drop it from your list.

Regards,
Matthias

[1] https://lore.kernel.org/lkml/104bb37e-55c3-8dd0-f501-0e8a142511e6@gmail.com/

> ---
>   arch/arm64/boot/dts/mediatek/mt8195.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 5d31536f4c486..09df105f4606d 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1380,6 +1380,12 @@ pciephy_glb_intr: pciephy-glb-intr@193 {
>   			dp_calibration: dp-data@1ac {
>   				reg = <0x1ac 0x10>;
>   			};
> +			lvts_efuse_data1: lvts1-calib@1bc {
> +				reg = <0x1bc 0x14>;
> +			};
> +			lvts_efuse_data2: lvts2-calib@1d0 {
> +				reg = <0x1d0 0x38>;
> +			};
>   		};
>   
>   		u3phy2: t-phy@11c40000 {