From: "Cédric Le Goater" <clg@kaod.org>
To: Pratyush Yadav <p.yadav@ti.com>
Cc: <linux-spi@vger.kernel.org>, <linux-mtd@lists.infradead.org>,
Mark Brown <broonie@kernel.org>,
Tudor Ambarus <tudor.ambarus@microchip.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
<linux-aspeed@lists.ozlabs.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>,
<devicetree@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Tao Ren <rentao.bupt@gmail.com>,
Rob Herring <robh@kernel.org>
Subject: Re: [PATCH v4 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding
Date: Thu, 31 Mar 2022 09:36:24 +0200 [thread overview]
Message-ID: <2a411a3e-4b7f-c116-b595-f33bffccb4e7@kaod.org> (raw)
In-Reply-To: <20220330191908.nhg52a5ayzczpzai@ti.com>
Hello Pratyush,
On 3/30/22 21:19, Pratyush Yadav wrote:
> On 25/03/22 11:08AM, Cédric Le Goater wrote:
>> The "interrupt" property is optional because it is only necessary for
>> controllers supporting DMAs (Not implemented yet in the new driver).
>>
>> Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
>> Tested-by: Joel Stanley <joel@jms.id.au>
>> Tested-by: Tao Ren <rentao.bupt@gmail.com>
>> Reviewed-by: Joel Stanley <joel@jms.id.au>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Cédric Le Goater <clg@kaod.org>
>> ---
>> .../bindings/spi/aspeed,ast2600-fmc.yaml | 87 +++++++++++++++++++
>> MAINTAINERS | 9 ++
>> 2 files changed, 96 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
>> new file mode 100644
>> index 000000000000..e16bbcd38560
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Aspeed SMC controllers bindings
>> +
>> +maintainers:
>> + - Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
>> + - Cédric Le Goater <clg@kaod.org>
>> +
>> +description: |
>> + This binding describes the Aspeed Static Memory Controllers (FMC and
>> + SPI) of the AST2400, AST2500 and AST2600 SOCs.
>> +
>> +allOf:
>> + - $ref: "spi-controller.yaml#"
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - aspeed,ast2600-fmc
>> + - aspeed,ast2600-spi
>> + - aspeed,ast2500-fmc
>> + - aspeed,ast2500-spi
>> + - aspeed,ast2400-fmc
>> + - aspeed,ast2400-spi
>> +
>> + reg:
>> + items:
>> + - description: registers
>> + - description: memory mapping
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> +patternProperties:
>> + "@[0-9a-f]+":
>> + type: object
>> +
>> + properties:
>> + spi-rx-bus-width:
>> + enum: [1, 2, 4]
>
> No need for this. It should already be taken care of by
> spi-peripheral-props.yaml
So we could drop the whole 'patternProperties' section ?
>
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
>> + #include <dt-bindings/clock/ast2600-clock.h>
>> +
>> + spi@1e620000 {
>> + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "aspeed,ast2600-fmc";
>> + clocks = <&syscon ASPEED_CLK_AHB>;
>> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
>
> Nitpick: Add a blank line here
>
>> + flash@0 {
>> + reg = < 0 >;
>> + compatible = "jedec,spi-nor";
>> + spi-max-frequency = <50000000>;
>> + spi-rx-bus-width = <2>;
>> + };
>
> and here
>
>> + flash@1 {
>> + reg = < 1 >;
>> + compatible = "jedec,spi-nor";
>> + spi-max-frequency = <50000000>;
>> + spi-rx-bus-width = <2>;
>> + };
>
> and here. Looks a bit nicer.
Thanks for the comments, I will provide the cleanups in v5.
C.
>
>> + flash@2 {
>> + reg = < 2 >;
>> + compatible = "jedec,spi-nor";
>> + spi-max-frequency = <50000000>;
>> + spi-rx-bus-width = <2>;
>> + };
>> + };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index ea9d74b6236f..7d5f81dcd837 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -3021,6 +3021,15 @@ S: Maintained
>> F: Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
>> F: drivers/mmc/host/sdhci-of-aspeed*
>>
>> +ASPEED SMC SPI DRIVER
>> +M: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
>> +M: Cédric Le Goater <clg@kaod.org>
>> +L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
>> +L: openbmc@lists.ozlabs.org (moderated for non-subscribers)
>> +L: linux-spi@vger.kernel.org
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
>> +
>> ASPEED VIDEO ENGINE DRIVER
>> M: Eddie James <eajames@linux.ibm.com>
>> L: linux-media@vger.kernel.org
>> --
>> 2.34.1
>>
>
next prev parent reply other threads:[~2022-03-31 8:12 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-25 10:08 [PATCH v4 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Cédric Le Goater
2022-03-25 10:08 ` [PATCH v4 01/11] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers Cédric Le Goater
2022-03-25 10:08 ` [PATCH v4 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding Cédric Le Goater
2022-03-30 19:19 ` Pratyush Yadav
2022-03-31 7:36 ` Cédric Le Goater [this message]
2022-03-31 12:20 ` Pratyush Yadav
2022-03-25 10:08 ` [PATCH v4 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Cédric Le Goater
2022-03-29 8:56 ` Cédric Le Goater
2022-03-29 10:49 ` Mark Brown
2022-03-30 19:33 ` Pratyush Yadav
2022-04-04 7:06 ` Cédric Le Goater
2022-04-05 19:29 ` Pratyush Yadav
2022-03-25 10:08 ` [PATCH v4 04/11] spi: aspeed: Add support for direct mapping Cédric Le Goater
2022-03-30 19:45 ` Pratyush Yadav
2022-04-04 7:11 ` Cédric Le Goater
2022-04-05 19:27 ` Pratyush Yadav
2022-03-25 10:08 ` [PATCH v4 05/11] spi: aspeed: Adjust direct mapping to device size Cédric Le Goater
2022-03-25 10:08 ` [PATCH v4 06/11] spi: aspeed: Workaround AST2500 limitations Cédric Le Goater
2022-03-25 10:08 ` [PATCH v4 07/11] spi: aspeed: Add support for the AST2400 SPI controller Cédric Le Goater
2022-03-25 10:08 ` [PATCH v4 08/11] spi: aspeed: Calibrate read timings Cédric Le Goater
2022-03-30 11:53 ` Chin-Ting Kuo
2022-03-30 12:14 ` Cédric Le Goater
2022-03-31 2:46 ` Chin-Ting Kuo
2022-03-31 7:15 ` Cédric Le Goater
2022-03-31 8:34 ` Chin-Ting Kuo
2022-03-31 16:41 ` Pratyush Yadav
2022-04-04 7:30 ` Cédric Le Goater
2022-04-05 19:22 ` Pratyush Yadav
2022-03-25 10:08 ` [PATCH v4 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers Cédric Le Goater
2022-03-25 10:08 ` [PATCH v4 10/11] ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes Cédric Le Goater
2022-03-25 10:08 ` [PATCH v4 11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600 Cédric Le Goater
2022-03-30 19:49 ` Pratyush Yadav
2022-04-01 14:12 ` [PATCH v4 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Jae Hyun Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2a411a3e-4b7f-c116-b595-f33bffccb4e7@kaod.org \
--to=clg@kaod.org \
--cc=andrew@aj.id.au \
--cc=broonie@kernel.org \
--cc=chin-ting_kuo@aspeedtech.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=rentao.bupt@gmail.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=tudor.ambarus@microchip.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).