Re: [PATCH 1/4] tty: serial: meson: allow baud-rates higher than 115200

["Andreas Färber" <afaerber-l3A5Bk7waGM@public.gmane.org>]

Am 15.01.2017 um 23:32 schrieb Martin Blumenstingl:
> The vendor driver allows setting baud-rates higher than 115200 baud.
> There is a check in the vendor driver which prevents using more than
> 115200 baud during startup, however it does not have such a check in
> .set_termios.
> Higher baud-rates are often used by the bluetooth modules embedded into
> the SDIO wifi chips (Amlogic devices use brcmfmac based wifi chips quite
> often, 2000000 baud seems to be a common value for the UART baud-rate in
> Amlogic's "libbt").
> 
> I have tested this on a Meson GXL device with uart_A (to which the
> bluetooth module is connected, where initialization times out with
> 115200 baud) and uart_AO (which I manually set to 2000000 baud  and then
> connected with my USB UART adapter to that).
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>

Tested-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>

Thanks,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html