From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dave Gerlach Subject: Re: [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq Date: Wed, 8 Feb 2017 08:45:55 -0600 Message-ID: <2aba1159-9a48-329f-2a54-8079b32b06e2@ti.com> References: <20170203172929.23940-1-d-gerlach@ti.com> <20170203172929.23940-3-d-gerlach@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Rob Herring Cc: Nishanth Menon , "devicetree@vger.kernel.org" , "linux-pm@vger.kernel.org" , Tony Lindgren , Viresh Kumar , "Rafael J . Wysocki" , Lukasz Majewski , linux-omap , "linux-arm-kernel@lists.infradead.org" List-Id: devicetree@vger.kernel.org On 02/08/2017 08:44 AM, Rob Herring wrote: > On Fri, Feb 3, 2017 at 11:29 AM, Dave Gerlach wrote: >> Add the device tree bindings document for the TI CPUFreq/OPP driver >> on AM33xx, AM43xx, DRA7xx, and AM57xx SoCs. The operating-points-v2 >> binding allows us to provide an opp-supported-hw property for each OPP >> to define when it is available. This driver is responsible for reading >> and parsing registers to determine which OPPs can be selectively enabled >> based on the specific SoC in use by matching against the opp-supported-hw >> data. >> >> Acked-by: Viresh Kumar >> Signed-off-by: Dave Gerlach >> --- > > [...] > >> +/* >> + * cpu0 has different OPPs depending on SoC revision and some on revisions >> + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not >> + */ >> +cpu0_opp_table: opp_table { > > One step closer, but as I showed last time, use a '-', not '_'. I apologize I thought the comment was only about the 0, completely missed the underscore, you are correct, thanks. Regards, Dave > > Rob >