Re: [PATCH 00/21] Adding support of ADI ARMv8 ADSP-SC598 SoC.

["Arnd Bergmann" <arnd@arndb.de>]

On Thu, Sep 12, 2024, at 18:24, Arturs Artamonovs via B4 Relay wrote:
> This set of patches based on ADI fork of Linux Kerenl that support 
> family of ADSP-SC5xx
> SoC's and used by customers for some time . Patch series contains 
> minimal set
> of changes to add ADSP-SC598 support to upstream kernel. This series 
> include
> UART,I2C,IRQCHIP,RCU drivers and device-tree to be able boot on 
> EV-SC598-SOM
> board into serial shell and able to reset the board. Current SOM board
> requires I2C expander to enable UART output.
>
> UART,I2C and PINCTRL drivers are based on old Blackfin drivers with
> ADSP-SC5xx related bug fixes and improvments.
>
> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>

Hi Arturs,

Thanks for your submission. I've done a first pass of a review
now, but the drivers will all need a more detailed review from
the subsystem maintainers as well.

For the drivers/soc and include/linux/soc portions, I need
to do second review round when you have added a description
about what these are used for, ideally I would hope that most
of those can disappear from the final series when the required
bits are moved into other drivers.

I commented on one of the bindings about the compatible
string, but later saw that the same issue is present in all
of the bindings, which each need a more specific identifier
for a particular piece of hardware they are compatible with.

        Arnd