Re: [PATCH v3 5/7] dt-bindings: soc: starfive: Add StarFive syscon module

[Xingyu Wu <xingyu.wu@starfivetech.com>]

On 2023/5/9 14:52, Xingyu Wu wrote:
> On 2023/5/9 14:35, Conor Dooley wrote:
>> 
>> 
>> On 9 May 2023 07:23:18 IST, Xingyu Wu <xingyu.wu@starfivetech.com> wrote:
>>>On 2023/5/9 3:24, Conor Dooley wrote:
>>>> On Mon, Apr 24, 2023 at 06:15:47PM +0100, Conor Dooley wrote:
>>>>> On Fri, Apr 14, 2023 at 10:41:55AM +0800, Xingyu Wu wrote:
>>>>> > From: William Qiu <william.qiu@starfivetech.com>
>>>>> > 
>>>>> > Add documentation to describe StarFive System Controller Registers.
>>>>> > 
>>>>> > Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>>>>> > ---
>>>>> >  .../soc/starfive/starfive,jh7110-syscon.yaml  | 58 +++++++++++++++++++
>>>>> >  MAINTAINERS                                   |  6 ++
>>>>> >  2 files changed, 64 insertions(+)
>>>>> >  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>>> > 
>>>>> > diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>>> > new file mode 100644
>>>>> > index 000000000000..de086e74a229
>>>>> > --- /dev/null
>>>>> > +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
>>>>> > @@ -0,0 +1,58 @@
>>>>> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>>>> > +%YAML 1.2
>>>>> > +---
>>>>> > +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
>>>>> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>>> > +
>>>>> > +title: StarFive JH7110 SoC system controller
>>>>> > +
>>>>> > +maintainers:
>>>>> > +  - William Qiu <william.qiu@starfivetech.com>
>>>>> > +
>>>>> > +description: |
>>>>> > +  The StarFive JH7110 SoC system controller provides register information such
>>>>> > +  as offset, mask and shift to configure related modules such as MMC and PCIe.
>>>>> > +
>>>>> > +properties:
>>>>> > +  compatible:
>>>>> > +    oneOf:
>>>>> > +      - items:
>>>>> > +          - enum:
>>>>> > +              - starfive,jh7110-aon-syscon
>>>>> > +              - starfive,jh7110-sys-syscon
>>>>> > +          - const: syscon
>>>>> > +          - const: simple-mfd
>>>>> > +      - items:
>>>>> > +          - const: starfive,jh7110-stg-syscon
>>>>> > +          - const: syscon
>>>>> > +
>>>>> > +  reg:
>>>>> > +    maxItems: 1
>>>>> > +
>>>>> > +  clock-controller:
>>>>> > +    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
>>>>> > +    type: object
>>>>> > +
>>>>> > +  power-controller:
>>>>> > +    $ref: /schemas/power/starfive,jh7110-pmu.yaml#
>>>>> > +    type: object
>>>>> 
>>>>> My plan was to grab this patch after the merge window, but there's been
>>>>> some back and forth [1] about what exactly should be a power-controller
>>>>> here. Given the merge window is open & I know Emil wants to look at the
>>>>> various clock bits for the JH7110, I don't think there's a pressing need
>>>>> for you to do anything here, but figured I'd at least mention how things
>>>>> are going on this thread too.
>>>> 
>>>> To follow up on this, it transpired in that thread that this node, not a
>>>> child node, should be the power controller.
>>>> 
>>>> Up to you StarFive folk how you wish to resend, but I am fine with it
>>>> being in this series, I shall just not pick up the soc driver patches
>>>> until the resent binding is applied by Stephen.
>>>> 
>>>
>>>Thanks. I had discussed with changhuang.liang about this. And I will drop
>>>the 'starfive,jh7110-aon-syscon' and 'power-controller' in next patchset.
>>>Changhuang will take these in his patchset.
>> 
>> Won't that result in broken bindings, since there's a ref to the pll binding?
>> Keeping it in the same series (i.e. this one) makes
>> the most sense to me.
>> 
> 
> I will keep the 'sys-syscon' and 'stg-syscon'. The ref just follows the 'sys-syscon'
> so I also keep it and the pll binding.
> I also hope to add the 'aon-syscon' in this same series but it should be the power
> controller, so I have to give up it.
> 

I synchronized with Chang Huang. It is decided to keep 'aon-syscon' as the power
controller in this and do not add child node in 'aon-syscon'.
And I will update it in the next version of patch.

Best regards,
Xingyu Wu