Re: [PATCH v2 3/4] drm/panel: visionox-vtdr6130: Modularize panel config

[Neil Armstrong <neil.armstrong@linaro.org>]

On 9/25/26 09:08, Aaron Kling via B4 Relay wrote:
> From: Aaron Kling <webgeek1234@gmail.com>
> 
> The vtdr6130 is a DDIC, a common chip that is used by multiple panels.
> Prepare the driver for more panels.
> 
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
>   drivers/gpu/drm/panel/panel-visionox-vtdr6130.c | 91 +++++++++++++++++--------
>   1 file changed, 61 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> index b66d6c7128c75..278f5acc2d661 100644
> --- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> +++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> @@ -19,11 +19,24 @@
>   
>   struct visionox_vtdr6130 {
>   	struct drm_panel panel;
> -	struct drm_dsc_config dsc;
>   	struct mipi_dsi_device *dsi;
>   	struct gpio_desc *reset_gpio;
>   	struct regulator_bulk_data *supplies;
>   	enum drm_panel_orientation orientation;
> +	struct visionox_vtdr6130_desc *desc;
> +};
> +
> +struct visionox_vtdr6130_desc {
> +	unsigned int bpc;
> +	unsigned int lanes;
> +	unsigned long mode_flags;
> +	enum mipi_dsi_pixel_format format;
> +
> +	const struct drm_display_mode *modes;
> +	unsigned int num_modes;
> +	int (*init_sequence)(struct visionox_vtdr6130 *ctx);
> +
> +	struct drm_dsc_config dsc;
>   };
>   
>   static const struct regulator_bulk_data visionox_vtdr6130_supplies[] = {
> @@ -162,7 +175,7 @@ static int visionox_vtdr6130_prepare(struct drm_panel *panel)
>   
>   	visionox_vtdr6130_reset(ctx);
>   
> -	ret = visionox_vtdr6130_on(ctx);
> +	ret = ctx->desc->init_sequence(ctx);
>   	if (ret < 0) {
>   		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   		regulator_bulk_disable(ARRAY_SIZE(visionox_vtdr6130_supplies),
> @@ -187,26 +200,50 @@ static int visionox_vtdr6130_unprepare(struct drm_panel *panel)
>   	return 0;
>   }
>   
> -static const struct drm_display_mode visionox_vtdr6130_mode = {
> -	.clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
> -	.hdisplay = 1080,
> -	.hsync_start = 1080 + 20,
> -	.hsync_end = 1080 + 20 + 2,
> -	.htotal = 1080 + 20 + 2 + 20,
> -	.vdisplay = 2400,
> -	.vsync_start = 2400 + 20,
> -	.vsync_end = 2400 + 20 + 2,
> -	.vtotal = 2400 + 20 + 2 + 18,
> -	.width_mm = 71,
> -	.height_mm = 157,
> +static const struct drm_display_mode visionox_vtdr6130_modes[] = {
> +	{
> +		.clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
> +		.hdisplay = 1080,
> +		.hsync_start = 1080 + 20,
> +		.hsync_end = 1080 + 20 + 2,
> +		.htotal = 1080 + 20 + 2 + 20,
> +		.vdisplay = 2400,
> +		.vsync_start = 2400 + 20,
> +		.vsync_end = 2400 + 20 + 2,
> +		.vtotal = 2400 + 20 + 2 + 18,
> +		.width_mm = 71,
> +		.height_mm = 157,
> +	},
> +};
> +
> +static struct visionox_vtdr6130_desc visionox_vtdr6130_panel_desc = {
> +	.modes = visionox_vtdr6130_modes,
> +	.num_modes = ARRAY_SIZE(visionox_vtdr6130_modes),
> +	.bpc = 8,
> +	.lanes = 4,
> +	.format = MIPI_DSI_FMT_RGB888,
> +	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
> +		      MIPI_DSI_CLOCK_NON_CONTINUOUS,
> +	.init_sequence = visionox_vtdr6130_on,
> +	.dsc = {
> +		.dsc_version_major = 0x1,
> +		.dsc_version_minor = 0x2,
> +		.slice_height = 40,
> +		.slice_width = 540,
> +		.slice_count = 2,
> +		.bits_per_component = 8,
> +		.bits_per_pixel = 8 << 4,
> +		.block_pred_enable = true,
> +	},
>   };
>   
>   static int visionox_vtdr6130_get_modes(struct drm_panel *panel,
>   				       struct drm_connector *connector)
>   {
> +	struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
>   	struct drm_display_mode *mode;
>   
> -	mode = drm_mode_duplicate(connector->dev, &visionox_vtdr6130_mode);
> +	mode = drm_mode_duplicate(connector->dev, ctx->desc->modes);
>   	if (!mode)
>   		return -ENOMEM;
>   
> @@ -284,23 +321,17 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
>   		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
>   				     "Failed to get reset-gpios\n");
>   
> +	ctx->desc = (struct visionox_vtdr6130_desc *)of_device_get_match_data(dev);
> +	if (!ctx->desc)
> +		return -ENODEV;
> +
>   	ctx->dsi = dsi;
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
> -	ctx->dsc.dsc_version_major = 0x1;
> -	ctx->dsc.dsc_version_minor = 0x2;
> -	ctx->dsc.slice_height = 40;
> -	ctx->dsc.slice_width = 540;
> -	ctx->dsc.slice_count = 2;
> -	ctx->dsc.bits_per_component = 8;
> -	ctx->dsc.bits_per_pixel = 8 << 4;
> -	ctx->dsc.block_pred_enable = true;
> -
> -	dsi->dsc = &ctx->dsc;
> -	dsi->lanes = 4;
> -	dsi->format = MIPI_DSI_FMT_RGB888;
> -	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
> -			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +	dsi->dsc = &ctx->desc->dsc;
> +	dsi->lanes = ctx->desc->lanes;
> +	dsi->format = ctx->desc->format;
> +	dsi->mode_flags = ctx->desc->mode_flags;
>   	ctx->panel.prepare_prev_first = true;
>   
>   	ret = drm_of_get_panel_orientation(dev->of_node, &ctx->orientation);
> @@ -322,7 +353,7 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
>   }
>   
>   static const struct of_device_id visionox_vtdr6130_of_match[] = {
> -	{ .compatible = "visionox,vtdr6130" },
> +	{ .compatible = "visionox,vtdr6130", .data = &visionox_vtdr6130_panel_desc },
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, visionox_vtdr6130_of_match);
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil