Re: [PATCH v3] arm64: dts: qcom: sdm630: Add support for modem remoteproc

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 19/07/2023 11:34, Alexey Minnekhanov wrote:
> Modem subsystem in SDM630/660 is similar to MSM8998 and
> device tree node for it is based on the one from msm8998.dtsi.
> 
> Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
> ---
> 
> V3: Use memory-region property to specify memory regions, instead
>     of using "mba" and "mpss" subnodes.
> 
> V2 link: https://lore.kernel.org/lkml/20230621175046.61521-3-alexeymin@postmarketos.org/
> 
>  arch/arm64/boot/dts/qcom/sdm630.dtsi | 59 ++++++++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index 2136ded22f7e..797625cf78ac 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -1032,6 +1032,65 @@ data-pins {
>  			};
>  		};
>  
> +		remoteproc_mss: remoteproc@4080000 {
> +			compatible = "qcom,sdm660-mss-pil";

Missing bindings so standard comment:

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Best regards,
Krzysztof