[PATCH v7 0/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

[PATCH v7 0/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

[Mehdi Djait]

Hello everyone,

Version 7 for adding support for the kx132-1211 accelerometer

KX132-1211 accelerometer is a sensor which:
	- supports G-ranges of (+/-) 2, 4, 8, and 16G
	- can be connected to I2C or SPI
	- has internal HW FIFO buffer
	- supports various ODRs (output data rates)

The KX132-1211 accelerometer is very similar to the KX022A. 
One key difference is number of bits to report the number of data bytes that 
have been stored in the buffer: 8 bits for KX022A vs 10 bits for
KX132-1211.

Changes in v7:
- added a min_t in kx132_get_fifo_bytes to ensure that we don't that the
  fifo_bytes is never bigger than the 
  fifo_length * KX022A_FIFO_SAMPLES_SIZE_BYTES - no matter what we read from I2C
  as suggested by Matti

Changes in v6:
- check for availability of chip_info for the SPI case
- changed the order of elements in the kx022a_data struct to save memory

Changes in v5:
- moved the "kfree" call to match the reverse of what happens in 
  kx022a_fifo_enable() as suggested by Matti and Jonathan
- used min_t, checked for availability of chip_info and moved the
  position of u16 buf_smp_lvl_mask as suggested by Andy
- introduced buf_smp_lvl_mask in Patch 7 as suggested by Jonathan

Changes in v4:
- moved the allocation of the fifo_buffer to kx022a_fifo_enable and
  kx022a_fifo_disable
- some fixes to the regmap ranges of kx132-1211 

Changes in v3:
- added two new patches by separating the addition of the 
  i2c_device_id table and the removal of blank lines from other
  unrelated changes
- fixes a warning detected by the kernel test robot
- made all the changes related the chip_info in one patch

Changes in v2:
- added a new patch for warning when the device_id match fails in the
  probe function
- added a new patch for the function that retrieves the number of bytes
  in the buffer
- added a change to the Kconfig file in the patch adding the support
  for the kx132-1211
- various fixes and modifications listed under each patch

Mehdi Djait (7):
  dt-bindings: iio: Add KX132-1211 accelerometer
  iio: accel: kionix-kx022a: Remove blank lines
  iio: accel: kionix-kx022a: Warn on failed matches and assume
    compatibility
  iio: accel: kionix-kx022a: Add an i2c_device_id table
  iio: accel: kionix-kx022a: Refactor driver and add chip_info structure
  iio: accel: kionix-kx022a: Add a function to retrieve number of bytes
    in buffer
  iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

 .../bindings/iio/accel/kionix,kx022a.yaml     |  12 +-
 drivers/iio/accel/Kconfig                     |   8 +-
 drivers/iio/accel/kionix-kx022a-i2c.c         |  24 +-
 drivers/iio/accel/kionix-kx022a-spi.c         |  15 +-
 drivers/iio/accel/kionix-kx022a.c             | 314 ++++++++++++++----
 drivers/iio/accel/kionix-kx022a.h             | 110 +++++-
 6 files changed, 408 insertions(+), 75 deletions(-)

-- 
2.30.2

[PATCH v7 1/7] dt-bindings: iio: Add KX132-1211 accelerometer

[Mehdi Djait]

Extend the kionix,kx022a.yaml file to support the kx132-1211 device

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v7:
v6:
v5:
v4:
v3:
- no changes 

v2:
- made the device name more specific from "kx132" to "kx132-1211"
- removed the output data-rates mentioned and replaced them with "variable 
output data-rates"

 .../devicetree/bindings/iio/accel/kionix,kx022a.yaml | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
index 986df1a6ff0a..034b69614416 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -4,19 +4,21 @@
 $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM/Kionix KX022A Accelerometer
+title: ROHM/Kionix KX022A and KX132-1211 Accelerometers
 
 maintainers:
   - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
-  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
-  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
-  KX022A can be accessed either via I2C or SPI.
+  KX022A and KX132-1211 are 3-axis accelerometers supporting +/- 2G, 4G, 8G and
+  16G ranges, variable output data-rates and a hardware-fifo buffering.
+  KX022A and KX132-1211 can be accessed either via I2C or SPI.
 
 properties:
   compatible:
-    const: kionix,kx022a
+    enum:
+      - kionix,kx022a
+      - kionix,kx132-1211
 
   reg:
     maxItems: 1
-- 
2.30.2

[PATCH v7 2/7] iio: accel: kionix-kx022a: Remove blank lines

[Mehdi Djait]

Remove blank lines pointed out by the checkpatch script

Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v7:
v6:
v5:
v4:
- no changes

v3:
- no changes, this patch is introduced in the v2

 drivers/iio/accel/kionix-kx022a.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index f98393d74666..ff8aa7b9568e 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -341,7 +341,6 @@ static int kx022a_turn_on_off_unlocked(struct kx022a_data *data, bool on)
 		dev_err(data->dev, "Turn %s fail %d\n", str_on_off(on), ret);
 
 	return ret;
-
 }
 
 static int kx022a_turn_off_lock(struct kx022a_data *data)
@@ -1121,7 +1120,6 @@ int kx022a_probe_internal(struct device *dev)
 	if (ret)
 		return dev_err_probe(data->dev, ret, "Could not request IRQ\n");
 
-
 	ret = devm_iio_trigger_register(dev, indio_trig);
 	if (ret)
 		return dev_err_probe(data->dev, ret,
-- 
2.30.2

[PATCH v7 3/7] iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility

[Mehdi Djait]

Avoid error returns on a failure to match and instead just warn with
assumption that we have a correct dt-binding telling us that
some new device with a different ID is backwards compatible.

Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v7:
v6:
v5:
v4:
- no changes

v3:
- changed from 'unsupported' to 'unknown'
- removed the opening bracket

v2:
- no changes, this patch is introduced in the v2

 drivers/iio/accel/kionix-kx022a.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index ff8aa7b9568e..494e81ba1da9 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -1036,10 +1036,8 @@ int kx022a_probe_internal(struct device *dev)
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to access sensor\n");
 
-	if (chip_id != KX022A_ID) {
-		dev_err(dev, "unsupported device 0x%x\n", chip_id);
-		return -EINVAL;
-	}
+	if (chip_id != KX022A_ID)
+		dev_warn(dev, "unknown device 0x%x\n", chip_id);
 
 	irq = fwnode_irq_get_byname(fwnode, "INT1");
 	if (irq > 0) {
-- 
2.30.2

[PATCH v7 4/7] iio: accel: kionix-kx022a: Add an i2c_device_id table

[Mehdi Djait]

Add the missing i2c device id.

Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v7:
v6:
v5:
v4:
- no changes

v3:                                                                             
- no changes, this patch is introduced in the v2

 drivers/iio/accel/kionix-kx022a-i2c.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c
index e6fd02d931b6..b5a85ce3a891 100644
--- a/drivers/iio/accel/kionix-kx022a-i2c.c
+++ b/drivers/iio/accel/kionix-kx022a-i2c.c
@@ -30,6 +30,12 @@ static int kx022a_i2c_probe(struct i2c_client *i2c)
 	return kx022a_probe_internal(dev);
 }
 
+static const struct i2c_device_id kx022a_i2c_id[] = {
+	{ .name = "kx022a" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id);
+
 static const struct of_device_id kx022a_of_match[] = {
 	{ .compatible = "kionix,kx022a", },
 	{ }
@@ -42,6 +48,7 @@ static struct i2c_driver kx022a_i2c_driver = {
 		.of_match_table = kx022a_of_match,
 	  },
 	.probe_new    = kx022a_i2c_probe,
+	.id_table     = kx022a_i2c_id,
 };
 module_i2c_driver(kx022a_i2c_driver);
 
-- 
2.30.2

[PATCH v7 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure

[Mehdi Djait]

Add the chip_info structure to the driver's private data to hold all
the device specific infos.
Refactor the kx022a driver implementation to make it more generic and
extensible.

Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v7:
- no changes

v6:
- placed chip_info after the regmap elemnt in kx022a_data struct to save
  memory as suggested by Andy
- added a check for the availability of chip_info for the SPI case as 
  suggested by Andy

v5:
- moved the "kfree" call to match the reverse of what happens in 
  kx022a_fifo_enable() as suggested by Matti and Jonathan
- used min_t, checked for availability of chip_info as suggested by Andy

v4:
- allocating and freeing the buffer moved to the kx022a_fifo{enable,
  disable} functions
- used the spi_get_device_match_data helper function

v3:
- added the change of the buffer's allocation in the __kx022a_fifo_flush
  to this patch
- added the chip_info to the struct kx022a_data

 drivers/iio/accel/kionix-kx022a-i2c.c |  17 +++-
 drivers/iio/accel/kionix-kx022a-spi.c |  13 ++-
 drivers/iio/accel/kionix-kx022a.c     | 116 ++++++++++++++++----------
 drivers/iio/accel/kionix-kx022a.h     |  52 +++++++++++-
 4 files changed, 146 insertions(+), 52 deletions(-)

diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c
index b5a85ce3a891..c59558fc6493 100644
--- a/drivers/iio/accel/kionix-kx022a-i2c.c
+++ b/drivers/iio/accel/kionix-kx022a-i2c.c
@@ -15,6 +15,7 @@
 static int kx022a_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
+	const struct kx022a_chip_info *chip_info;
 	struct regmap *regmap;
 
 	if (!i2c->irq) {
@@ -22,22 +23,30 @@ static int kx022a_i2c_probe(struct i2c_client *i2c)
 		return -EINVAL;
 	}
 
-	regmap = devm_regmap_init_i2c(i2c, &kx022a_regmap);
+	chip_info = device_get_match_data(&i2c->dev);
+	if (!chip_info) {
+		const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
+		chip_info = (const struct kx022a_chip_info *)id->driver_data;
+		if (!chip_info)
+			return -EINVAL;
+	}
+
+	regmap = devm_regmap_init_i2c(i2c, chip_info->regmap_config);
 	if (IS_ERR(regmap))
 		return dev_err_probe(dev, PTR_ERR(regmap),
 				     "Failed to initialize Regmap\n");
 
-	return kx022a_probe_internal(dev);
+	return kx022a_probe_internal(dev, chip_info);
 }
 
 static const struct i2c_device_id kx022a_i2c_id[] = {
-	{ .name = "kx022a" },
+	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id);
 
 static const struct of_device_id kx022a_of_match[] = {
-	{ .compatible = "kionix,kx022a", },
+	{ .compatible = "kionix,kx022a", .data = &kx022a_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c
index 9cd047f7b346..896b57866fc9 100644
--- a/drivers/iio/accel/kionix-kx022a-spi.c
+++ b/drivers/iio/accel/kionix-kx022a-spi.c
@@ -15,6 +15,7 @@
 static int kx022a_spi_probe(struct spi_device *spi)
 {
 	struct device *dev = &spi->dev;
+	const struct kx022a_chip_info *chip_info;
 	struct regmap *regmap;
 
 	if (!spi->irq) {
@@ -22,22 +23,26 @@ static int kx022a_spi_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	regmap = devm_regmap_init_spi(spi, &kx022a_regmap);
+	chip_info = spi_get_device_match_data(spi);
+	if (!chip_info)
+		return -EINVAL;
+
+	regmap = devm_regmap_init_spi(spi, chip_info->regmap_config);
 	if (IS_ERR(regmap))
 		return dev_err_probe(dev, PTR_ERR(regmap),
 				     "Failed to initialize Regmap\n");
 
-	return kx022a_probe_internal(dev);
+	return kx022a_probe_internal(dev, chip_info);
 }
 
 static const struct spi_device_id kx022a_id[] = {
-	{ "kx022a" },
+	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, kx022a_id);
 
 static const struct of_device_id kx022a_of_match[] = {
-	{ .compatible = "kionix,kx022a", },
+	{ .compatible = "kionix,kx022a", .data = &kx022a_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index 494e81ba1da9..0bab3f109e4e 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -48,7 +48,7 @@ enum {
 	KX022A_STATE_FIFO,
 };
 
-/* Regmap configs */
+/* kx022a Regmap configs */
 static const struct regmap_range kx022a_volatile_ranges[] = {
 	{
 		.range_min = KX022A_REG_XHP_L,
@@ -138,7 +138,7 @@ static const struct regmap_access_table kx022a_nir_regs = {
 	.n_yes_ranges = ARRAY_SIZE(kx022a_noinc_read_ranges),
 };
 
-const struct regmap_config kx022a_regmap = {
+static const struct regmap_config kx022a_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.volatile_table = &kx022a_volatile_regs,
@@ -149,10 +149,10 @@ const struct regmap_config kx022a_regmap = {
 	.max_register = KX022A_MAX_REGISTER,
 	.cache_type = REGCACHE_RBTREE,
 };
-EXPORT_SYMBOL_NS_GPL(kx022a_regmap, IIO_KX022A);
 
 struct kx022a_data {
 	struct regmap *regmap;
+	const struct kx022a_chip_info *chip_info;
 	struct iio_trigger *trig;
 	struct device *dev;
 	struct iio_mount_matrix orientation;
@@ -175,6 +175,8 @@ struct kx022a_data {
 	struct mutex mutex;
 	u8 watermark;
 
+	__le16 *fifo_buffer;
+
 	/* 3 x 16bit accel data + timestamp */
 	__le16 buffer[8] __aligned(IIO_DMA_MINALIGN);
 	struct {
@@ -208,7 +210,7 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = {
 	{ }
 };
 
-#define KX022A_ACCEL_CHAN(axis, index)				\
+#define KX022A_ACCEL_CHAN(axis, reg, index)			\
 {								\
 	.type = IIO_ACCEL,					\
 	.modified = 1,						\
@@ -220,7 +222,7 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = {
 				BIT(IIO_CHAN_INFO_SCALE) |	\
 				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
 	.ext_info = kx022a_ext_info,				\
-	.address = KX022A_REG_##axis##OUT_L,			\
+	.address = reg,						\
 	.scan_index = index,					\
 	.scan_type = {                                          \
 		.sign = 's',					\
@@ -231,9 +233,9 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = {
 }
 
 static const struct iio_chan_spec kx022a_channels[] = {
-	KX022A_ACCEL_CHAN(X, 0),
-	KX022A_ACCEL_CHAN(Y, 1),
-	KX022A_ACCEL_CHAN(Z, 2),
+	KX022A_ACCEL_CHAN(X, KX022A_REG_XOUT_L, 0),
+	KX022A_ACCEL_CHAN(Y, KX022A_REG_YOUT_L, 1),
+	KX022A_ACCEL_CHAN(Z, KX022A_REG_ZOUT_L, 2),
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
@@ -332,10 +334,10 @@ static int kx022a_turn_on_off_unlocked(struct kx022a_data *data, bool on)
 	int ret;
 
 	if (on)
-		ret = regmap_set_bits(data->regmap, KX022A_REG_CNTL,
+		ret = regmap_set_bits(data->regmap, data->chip_info->cntl,
 				      KX022A_MASK_PC1);
 	else
-		ret = regmap_clear_bits(data->regmap, KX022A_REG_CNTL,
+		ret = regmap_clear_bits(data->regmap, data->chip_info->cntl,
 					KX022A_MASK_PC1);
 	if (ret)
 		dev_err(data->dev, "Turn %s fail %d\n", str_on_off(on), ret);
@@ -402,7 +404,7 @@ static int kx022a_write_raw(struct iio_dev *idev,
 			break;
 
 		ret = regmap_update_bits(data->regmap,
-					 KX022A_REG_ODCNTL,
+					 data->chip_info->odcntl,
 					 KX022A_MASK_ODR, n);
 		data->odr_ns = kx022a_odrs[n];
 		kx022a_turn_on_unlock(data);
@@ -423,7 +425,7 @@ static int kx022a_write_raw(struct iio_dev *idev,
 		if (ret)
 			break;
 
-		ret = regmap_update_bits(data->regmap, KX022A_REG_CNTL,
+		ret = regmap_update_bits(data->regmap, data->chip_info->cntl,
 					 KX022A_MASK_GSEL,
 					 n << KX022A_GSEL_SHIFT);
 		kx022a_turn_on_unlock(data);
@@ -445,7 +447,7 @@ static int kx022a_fifo_set_wmi(struct kx022a_data *data)
 
 	threshold = data->watermark;
 
-	return regmap_update_bits(data->regmap, KX022A_REG_BUF_CNTL1,
+	return regmap_update_bits(data->regmap, data->chip_info->buf_cntl1,
 				  KX022A_MASK_WM_TH, threshold);
 }
 
@@ -488,7 +490,7 @@ static int kx022a_read_raw(struct iio_dev *idev,
 		return ret;
 
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = regmap_read(data->regmap, KX022A_REG_ODCNTL, &regval);
+		ret = regmap_read(data->regmap, data->chip_info->odcntl, &regval);
 		if (ret)
 			return ret;
 
@@ -503,7 +505,7 @@ static int kx022a_read_raw(struct iio_dev *idev,
 		return IIO_VAL_INT_PLUS_MICRO;
 
 	case IIO_CHAN_INFO_SCALE:
-		ret = regmap_read(data->regmap, KX022A_REG_CNTL, &regval);
+		ret = regmap_read(data->regmap, data->chip_info->cntl, &regval);
 		if (ret < 0)
 			return ret;
 
@@ -530,8 +532,7 @@ static int kx022a_set_watermark(struct iio_dev *idev, unsigned int val)
 {
 	struct kx022a_data *data = iio_priv(idev);
 
-	if (val > KX022A_FIFO_LENGTH)
-		val = KX022A_FIFO_LENGTH;
+	val = min_t(unsigned int, data->chip_info->fifo_length, val);
 
 	mutex_lock(&data->mutex);
 	data->watermark = val;
@@ -592,7 +593,7 @@ static int kx022a_drop_fifo_contents(struct kx022a_data *data)
 	 */
 	data->timestamp = 0;
 
-	return regmap_write(data->regmap, KX022A_REG_BUF_CLEAR, 0x0);
+	return regmap_write(data->regmap, data->chip_info->buf_clear, 0x0);
 }
 
 static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
@@ -600,7 +601,6 @@ static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
 {
 	struct kx022a_data *data = iio_priv(idev);
 	struct device *dev = regmap_get_device(data->regmap);
-	__le16 buffer[KX022A_FIFO_LENGTH * 3];
 	uint64_t sample_period;
 	int count, fifo_bytes;
 	bool renable = false;
@@ -679,13 +679,13 @@ static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
 	}
 
 	fifo_bytes = count * KX022A_FIFO_SAMPLES_SIZE_BYTES;
-	ret = regmap_noinc_read(data->regmap, KX022A_REG_BUF_READ,
-				&buffer[0], fifo_bytes);
+	ret = regmap_noinc_read(data->regmap, data->chip_info->buf_read,
+				data->fifo_buffer, fifo_bytes);
 	if (ret)
 		goto renable_out;
 
 	for (i = 0; i < count; i++) {
-		__le16 *sam = &buffer[i * 3];
+		__le16 *sam = &data->fifo_buffer[i * 3];
 		__le16 *chs;
 		int bit;
 
@@ -732,10 +732,10 @@ static const struct iio_info kx022a_info = {
 static int kx022a_set_drdy_irq(struct kx022a_data *data, bool en)
 {
 	if (en)
-		return regmap_set_bits(data->regmap, KX022A_REG_CNTL,
+		return regmap_set_bits(data->regmap, data->chip_info->cntl,
 				       KX022A_MASK_DRDY);
 
-	return regmap_clear_bits(data->regmap, KX022A_REG_CNTL,
+	return regmap_clear_bits(data->regmap, data->chip_info->cntl,
 				 KX022A_MASK_DRDY);
 }
 
@@ -770,7 +770,7 @@ static int kx022a_fifo_disable(struct kx022a_data *data)
 	if (ret)
 		goto unlock_out;
 
-	ret = regmap_clear_bits(data->regmap, KX022A_REG_BUF_CNTL2,
+	ret = regmap_clear_bits(data->regmap, data->chip_info->buf_cntl2,
 				KX022A_MASK_BUF_EN);
 	if (ret)
 		goto unlock_out;
@@ -779,6 +779,8 @@ static int kx022a_fifo_disable(struct kx022a_data *data)
 
 	kx022a_drop_fifo_contents(data);
 
+	kfree(data->fifo_buffer);
+
 	return kx022a_turn_on_unlock(data);
 
 unlock_out:
@@ -801,6 +803,11 @@ static int kx022a_fifo_enable(struct kx022a_data *data)
 {
 	int ret;
 
+	data->fifo_buffer = kmalloc(data->chip_info->fifo_length *
+				    KX022A_FIFO_SAMPLES_SIZE_BYTES, GFP_KERNEL);
+	if (!data->fifo_buffer)
+		return -ENOMEM;
+
 	ret = kx022a_turn_off_lock(data);
 	if (ret)
 		return ret;
@@ -811,7 +818,7 @@ static int kx022a_fifo_enable(struct kx022a_data *data)
 		goto unlock_out;
 
 	/* Enable buffer */
-	ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2,
+	ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2,
 			      KX022A_MASK_BUF_EN);
 	if (ret)
 		goto unlock_out;
@@ -857,7 +864,7 @@ static irqreturn_t kx022a_trigger_handler(int irq, void *p)
 	struct kx022a_data *data = iio_priv(idev);
 	int ret;
 
-	ret = regmap_bulk_read(data->regmap, KX022A_REG_XOUT_L, data->buffer,
+	ret = regmap_bulk_read(data->regmap, data->chip_info->xout_l, data->buffer,
 			       KX022A_FIFO_SAMPLES_SIZE_BYTES);
 	if (ret < 0)
 		goto err_read;
@@ -905,7 +912,7 @@ static irqreturn_t kx022a_irq_thread_handler(int irq, void *private)
 	if (data->state & KX022A_STATE_FIFO) {
 		int ok;
 
-		ok = __kx022a_fifo_flush(idev, KX022A_FIFO_LENGTH, true);
+		ok = __kx022a_fifo_flush(idev, data->chip_info->fifo_length, true);
 		if (ok > 0)
 			ret = IRQ_HANDLED;
 	}
@@ -958,7 +965,7 @@ static int kx022a_chip_init(struct kx022a_data *data)
 	int ret, val;
 
 	/* Reset the senor */
-	ret = regmap_write(data->regmap, KX022A_REG_CNTL2, KX022A_MASK_SRST);
+	ret = regmap_write(data->regmap, data->chip_info->cntl2, KX022A_MASK_SRST);
 	if (ret)
 		return ret;
 
@@ -968,7 +975,7 @@ static int kx022a_chip_init(struct kx022a_data *data)
 	 */
 	msleep(1);
 
-	ret = regmap_read_poll_timeout(data->regmap, KX022A_REG_CNTL2, val,
+	ret = regmap_read_poll_timeout(data->regmap, data->chip_info->cntl2, val,
 				       !(val & KX022A_MASK_SRST),
 				       KX022A_SOFT_RESET_WAIT_TIME_US,
 				       KX022A_SOFT_RESET_TOTAL_WAIT_TIME_US);
@@ -978,14 +985,14 @@ static int kx022a_chip_init(struct kx022a_data *data)
 		return ret;
 	}
 
-	ret = regmap_reinit_cache(data->regmap, &kx022a_regmap);
+	ret = regmap_reinit_cache(data->regmap, data->chip_info->regmap_config);
 	if (ret) {
 		dev_err(data->dev, "Failed to reinit reg cache\n");
 		return ret;
 	}
 
 	/* set data res 16bit */
-	ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2,
+	ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2,
 			      KX022A_MASK_BRES16);
 	if (ret) {
 		dev_err(data->dev, "Failed to set data resolution\n");
@@ -995,7 +1002,31 @@ static int kx022a_chip_init(struct kx022a_data *data)
 	return kx022a_prepare_irq_pin(data);
 }
 
-int kx022a_probe_internal(struct device *dev)
+const struct kx022a_chip_info kx022a_chip_info = {
+	.name		  = "kx022-accel",
+	.regmap_config	  = &kx022a_regmap_config,
+	.channels	  = kx022a_channels,
+	.num_channels	  = ARRAY_SIZE(kx022a_channels),
+	.fifo_length	  = KX022A_FIFO_LENGTH,
+	.who		  = KX022A_REG_WHO,
+	.id		  = KX022A_ID,
+	.cntl		  = KX022A_REG_CNTL,
+	.cntl2		  = KX022A_REG_CNTL2,
+	.odcntl		  = KX022A_REG_ODCNTL,
+	.buf_cntl1	  = KX022A_REG_BUF_CNTL1,
+	.buf_cntl2	  = KX022A_REG_BUF_CNTL2,
+	.buf_clear	  = KX022A_REG_BUF_CLEAR,
+	.buf_status1	  = KX022A_REG_BUF_STATUS_1,
+	.buf_read	  = KX022A_REG_BUF_READ,
+	.inc1		  = KX022A_REG_INC1,
+	.inc4		  = KX022A_REG_INC4,
+	.inc5		  = KX022A_REG_INC5,
+	.inc6		  = KX022A_REG_INC6,
+	.xout_l		  = KX022A_REG_XOUT_L,
+};
+EXPORT_SYMBOL_NS_GPL(kx022a_chip_info, IIO_KX022A);
+
+int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info)
 {
 	static const char * const regulator_names[] = {"io-vdd", "vdd"};
 	struct iio_trigger *indio_trig;
@@ -1022,6 +1053,7 @@ int kx022a_probe_internal(struct device *dev)
 		return -ENOMEM;
 
 	data = iio_priv(idev);
+	data->chip_info = chip_info;
 
 	/*
 	 * VDD is the analog and digital domain voltage supply and
@@ -1032,24 +1064,24 @@ int kx022a_probe_internal(struct device *dev)
 	if (ret && ret != -ENODEV)
 		return dev_err_probe(dev, ret, "failed to enable regulator\n");
 
-	ret = regmap_read(regmap, KX022A_REG_WHO, &chip_id);
+	ret = regmap_read(regmap, chip_info->who, &chip_id);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to access sensor\n");
 
-	if (chip_id != KX022A_ID)
+	if (chip_id != chip_info->id)
 		dev_warn(dev, "unknown device 0x%x\n", chip_id);
 
 	irq = fwnode_irq_get_byname(fwnode, "INT1");
 	if (irq > 0) {
-		data->inc_reg = KX022A_REG_INC1;
-		data->ien_reg = KX022A_REG_INC4;
+		data->inc_reg = chip_info->inc1;
+		data->ien_reg = chip_info->inc4;
 	} else {
 		irq = fwnode_irq_get_byname(fwnode, "INT2");
 		if (irq <= 0)
 			return dev_err_probe(dev, irq, "No suitable IRQ\n");
 
-		data->inc_reg = KX022A_REG_INC5;
-		data->ien_reg = KX022A_REG_INC6;
+		data->inc_reg = chip_info->inc5;
+		data->ien_reg = chip_info->inc6;
 	}
 
 	data->regmap = regmap;
@@ -1058,9 +1090,9 @@ int kx022a_probe_internal(struct device *dev)
 	data->odr_ns = KX022A_DEFAULT_PERIOD_NS;
 	mutex_init(&data->mutex);
 
-	idev->channels = kx022a_channels;
-	idev->num_channels = ARRAY_SIZE(kx022a_channels);
-	idev->name = "kx022-accel";
+	idev->channels = chip_info->channels;
+	idev->num_channels = chip_info->num_channels;
+	idev->name = chip_info->name;
 	idev->info = &kx022a_info;
 	idev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
 	idev->available_scan_masks = kx022a_scan_masks;
diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h
index 12424649d438..0e5026019213 100644
--- a/drivers/iio/accel/kionix-kx022a.h
+++ b/drivers/iio/accel/kionix-kx022a.h
@@ -76,7 +76,55 @@
 
 struct device;
 
-int kx022a_probe_internal(struct device *dev);
-extern const struct regmap_config kx022a_regmap;
+/**
+ * struct kx022a_chip_info - Kionix accelerometer chip specific information
+ *
+ * @name:		name of the device
+ * @regmap_config:	pointer to register map configuration
+ * @channels:		pointer to iio_chan_spec array
+ * @num_channels:	number of iio_chan_spec channels
+ * @fifo_length:	number of 16-bit samples in a full buffer
+ * @who:		WHO_AM_I register
+ * @id:			WHO_AM_I register value
+ * @cntl:		control register 1
+ * @cntl2:		control register 2
+ * @odcntl:		output data control register
+ * @buf_cntl1:		buffer control register 1
+ * @buf_cntl2:		buffer control register 2
+ * @buf_clear:		buffer clear register
+ * @buf_status1:	buffer status register 1
+ * @buf_read:		buffer read register
+ * @inc1:		interrupt control register 1
+ * @inc4:		interrupt control register 4
+ * @inc5:		interrupt control register 5
+ * @inc6:		interrupt control register 6
+ * @xout_l:		x-axis output least significant byte
+ */
+struct kx022a_chip_info {
+	const char *name;
+	const struct regmap_config *regmap_config;
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+	unsigned int fifo_length;
+	u8 who;
+	u8 id;
+	u8 cntl;
+	u8 cntl2;
+	u8 odcntl;
+	u8 buf_cntl1;
+	u8 buf_cntl2;
+	u8 buf_clear;
+	u8 buf_status1;
+	u8 buf_read;
+	u8 inc1;
+	u8 inc4;
+	u8 inc5;
+	u8 inc6;
+	u8 xout_l;
+};
+
+int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info);
+
+extern const struct kx022a_chip_info kx022a_chip_info;
 
 #endif
-- 
2.30.2

[PATCH v7 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer

[Mehdi Djait]

Since Kionix accelerometers use various numbers of bits to report data, a
device-specific function is required.
Implement the function as a callback in the device-specific chip_info structure

Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v7:
- no changes

v6:
- directly return KX022A_FIFO_MAX_BYTES as suggested by Andy

v5:
- no changes

v4:
- removed the comment about "bogus value from i2c"
- removed regmap_get_device(data->regmap); dev is present in the
  driver's private data

v3:
- no changes

v2:
- separated this change from the chip_info introduction and made it a patch in v2 
- changed the function from generic implementation for to device-specific one
- removed blank lines pointed out by checkpatch
- changed the allocation of the "buffer" array in __kx022a_fifo_flush

 drivers/iio/accel/kionix-kx022a.c | 28 ++++++++++++++++++----------
 drivers/iio/accel/kionix-kx022a.h |  4 ++++
 2 files changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index 0bab3f109e4e..0b0f14dca17f 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -596,26 +596,33 @@ static int kx022a_drop_fifo_contents(struct kx022a_data *data)
 	return regmap_write(data->regmap, data->chip_info->buf_clear, 0x0);
 }
 
+static int kx022a_get_fifo_bytes(struct kx022a_data *data)
+{
+	int ret, fifo_bytes;
+
+	ret = regmap_read(data->regmap, KX022A_REG_BUF_STATUS_1, &fifo_bytes);
+	if (ret) {
+		dev_err(data->dev, "Error reading buffer status\n");
+		return ret;
+	}
+
+	if (fifo_bytes == KX022A_FIFO_FULL_VALUE)
+		return KX022A_FIFO_MAX_BYTES;
+
+	return fifo_bytes;
+}
+
 static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
 			       bool irq)
 {
 	struct kx022a_data *data = iio_priv(idev);
-	struct device *dev = regmap_get_device(data->regmap);
 	uint64_t sample_period;
 	int count, fifo_bytes;
 	bool renable = false;
 	int64_t tstamp;
 	int ret, i;
 
-	ret = regmap_read(data->regmap, KX022A_REG_BUF_STATUS_1, &fifo_bytes);
-	if (ret) {
-		dev_err(dev, "Error reading buffer status\n");
-		return ret;
-	}
-
-	/* Let's not overflow if we for some reason get bogus value from i2c */
-	if (fifo_bytes == KX022A_FIFO_FULL_VALUE)
-		fifo_bytes = KX022A_FIFO_MAX_BYTES;
+	fifo_bytes = data->chip_info->get_fifo_bytes(data);
 
 	if (fifo_bytes % KX022A_FIFO_SAMPLES_SIZE_BYTES)
 		dev_warn(data->dev, "Bad FIFO alignment. Data may be corrupt\n");
@@ -1023,6 +1030,7 @@ const struct kx022a_chip_info kx022a_chip_info = {
 	.inc5		  = KX022A_REG_INC5,
 	.inc6		  = KX022A_REG_INC6,
 	.xout_l		  = KX022A_REG_XOUT_L,
+	.get_fifo_bytes	  = kx022a_get_fifo_bytes,
 };
 EXPORT_SYMBOL_NS_GPL(kx022a_chip_info, IIO_KX022A);
 
diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h
index 0e5026019213..c9f9aee7e597 100644
--- a/drivers/iio/accel/kionix-kx022a.h
+++ b/drivers/iio/accel/kionix-kx022a.h
@@ -76,6 +76,8 @@
 
 struct device;
 
+struct kx022a_data;
+
 /**
  * struct kx022a_chip_info - Kionix accelerometer chip specific information
  *
@@ -99,6 +101,7 @@ struct device;
  * @inc5:		interrupt control register 5
  * @inc6:		interrupt control register 6
  * @xout_l:		x-axis output least significant byte
+ * @get_fifo_bytes:	function pointer to get number of bytes in the FIFO buffer
  */
 struct kx022a_chip_info {
 	const char *name;
@@ -121,6 +124,7 @@ struct kx022a_chip_info {
 	u8 inc5;
 	u8 inc6;
 	u8 xout_l;
+	int (*get_fifo_bytes)(struct kx022a_data *);
 };
 
 int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info);
-- 
2.30.2

[PATCH v7 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

[Mehdi Djait]

Kionix KX132-1211 is a tri-axis 16-bit accelerometer that can support
ranges from ±2G to ±16G, digital output through I²C/SPI.
Add support for basic accelerometer features such as reading acceleration
via IIO using raw reads, triggered buffer (data-ready), or the WMI IRQ.

Datasheet: https://kionixfs.azureedge.net/en/document/KX132-1211-Technical-Reference-Manual-Rev-5.0.pdf
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v7:
- added a min_t in kx132_get_fifo_bytes to ensure that we don't that the        
  fifo_bytes is never bigger than the 
  fifo_length * KX022A_FIFO_SAMPLES_SIZE_BYTES - no matter what we read from I2C
  as suggested by Matti  

v6: 
- no changes

v5: 
- moved the position of u16 buf_smp_lvl_mask as suggested by Andy
- introduced buf_smp_lvl_mask in Patch 7 as suggested by Jonathan

v4: 
- added KX132_REG_CNTL5 to the volatile ranges
- added the kionix reserved regs to the read_only ranges
- removed KX132_REG_MAN_WAKEUP from the write_only ranges

v3:
- fixed the warning of the kernel test robot in kx132_get_fifo_bytes
	(invalid assignment: &=, left side has type restricted __le16
	right side has type unsigned short)

v2:
- mentioned the kx132-1211 in the Kconfig
- added a kx132-specific get_fifo_bytes function
- changed the device name from "kx132" to "kx132-1211

 drivers/iio/accel/Kconfig             |   8 +-
 drivers/iio/accel/kionix-kx022a-i2c.c |   2 +
 drivers/iio/accel/kionix-kx022a-spi.c |   2 +
 drivers/iio/accel/kionix-kx022a.c     | 164 ++++++++++++++++++++++++++
 drivers/iio/accel/kionix-kx022a.h     |  54 +++++++++
 5 files changed, 226 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index b6b45d359f28..d8cc6e6f2bb9 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -418,8 +418,8 @@ config IIO_KX022A_SPI
 	select IIO_KX022A
 	select REGMAP_SPI
 	help
-	  Enable support for the Kionix KX022A digital tri-axis
-	  accelerometer connected to I2C interface.
+	  Enable support for the Kionix KX022A, KX132-1211 digital tri-axis
+	  accelerometers connected to SPI interface.
 
 config IIO_KX022A_I2C
 	tristate "Kionix KX022A tri-axis digital accelerometer I2C interface"
@@ -427,8 +427,8 @@ config IIO_KX022A_I2C
 	select IIO_KX022A
 	select REGMAP_I2C
 	help
-	  Enable support for the Kionix KX022A digital tri-axis
-	  accelerometer connected to I2C interface.
+	  Enable support for the Kionix KX022A, KX132-1211 digital tri-axis
+	  accelerometers connected to I2C interface.
 
 config KXSD9
 	tristate "Kionix KXSD9 Accelerometer Driver"
diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c
index c59558fc6493..0f4729c55d29 100644
--- a/drivers/iio/accel/kionix-kx022a-i2c.c
+++ b/drivers/iio/accel/kionix-kx022a-i2c.c
@@ -41,12 +41,14 @@ static int kx022a_i2c_probe(struct i2c_client *i2c)
 
 static const struct i2c_device_id kx022a_i2c_id[] = {
 	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info },
+	{ .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id);
 
 static const struct of_device_id kx022a_of_match[] = {
 	{ .compatible = "kionix,kx022a", .data = &kx022a_chip_info },
+	{ .compatible = "kionix,kx132-1211", .data = &kx132_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c
index 896b57866fc9..c7766492bcd9 100644
--- a/drivers/iio/accel/kionix-kx022a-spi.c
+++ b/drivers/iio/accel/kionix-kx022a-spi.c
@@ -37,12 +37,14 @@ static int kx022a_spi_probe(struct spi_device *spi)
 
 static const struct spi_device_id kx022a_id[] = {
 	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info },
+	{ .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, kx022a_id);
 
 static const struct of_device_id kx022a_of_match[] = {
 	{ .compatible = "kionix,kx022a", .data = &kx022a_chip_info },
+	{ .compatible = "kionix,kx132-1211", .data = &kx132_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index 0b0f14dca17f..6a9e6d850ec0 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -150,6 +150,117 @@ static const struct regmap_config kx022a_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
+/* Regmap configs kx132 */
+static const struct regmap_range kx132_volatile_ranges[] = {
+	{
+		.range_min = KX132_REG_XADP_L,
+		.range_max = KX132_REG_COTR,
+	}, {
+		.range_min = KX132_REG_TSCP,
+		.range_max = KX132_REG_INT_REL,
+	}, {
+		/* The reset bit will be cleared by sensor */
+		.range_min = KX132_REG_CNTL2,
+		.range_max = KX132_REG_CNTL2,
+	}, {
+		.range_min = KX132_REG_CNTL5,
+		.range_max = KX132_REG_CNTL5,
+	}, {
+		.range_min = KX132_REG_BUF_STATUS_1,
+		.range_max = KX132_REG_BUF_READ,
+	},
+};
+
+static const struct regmap_access_table kx132_volatile_regs = {
+	.yes_ranges = &kx132_volatile_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(kx132_volatile_ranges),
+};
+
+static const struct regmap_range kx132_precious_ranges[] = {
+	{
+		.range_min = KX132_REG_INT_REL,
+		.range_max = KX132_REG_INT_REL,
+	},
+};
+
+static const struct regmap_access_table kx132_precious_regs = {
+	.yes_ranges = &kx132_precious_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(kx132_precious_ranges),
+};
+
+static const struct regmap_range kx132_read_only_ranges[] = {
+	{
+		.range_min = KX132_REG_XADP_L,
+		.range_max = KX132_REG_INT_REL,
+	}, {
+		.range_min = KX132_REG_BUF_STATUS_1,
+		.range_max = KX132_REG_BUF_STATUS_2,
+	}, {
+		.range_min = KX132_REG_BUF_READ,
+		.range_max = KX132_REG_BUF_READ,
+	}, {
+		/* Kionix reserved registers: should not be written */
+		.range_min = 0x28,
+		.range_max = 0x28,
+	}, {
+		.range_min = 0x35,
+		.range_max = 0x36,
+	}, {
+		.range_min = 0x3c,
+		.range_max = 0x48,
+	}, {
+		.range_min = 0x4e,
+		.range_max = 0x5c,
+	}, {
+		.range_min = 0x77,
+		.range_max = 0x7f,
+	},
+};
+
+static const struct regmap_access_table kx132_ro_regs = {
+	.no_ranges = &kx132_read_only_ranges[0],
+	.n_no_ranges = ARRAY_SIZE(kx132_read_only_ranges),
+};
+
+static const struct regmap_range kx132_write_only_ranges[] = {
+	{
+		.range_min = KX132_REG_SELF_TEST,
+		.range_max = KX132_REG_SELF_TEST,
+	}, {
+		.range_min = KX132_REG_BUF_CLEAR,
+		.range_max = KX132_REG_BUF_CLEAR,
+	},
+};
+
+static const struct regmap_access_table kx132_wo_regs = {
+	.no_ranges = &kx132_write_only_ranges[0],
+	.n_no_ranges = ARRAY_SIZE(kx132_write_only_ranges),
+};
+
+static const struct regmap_range kx132_noinc_read_ranges[] = {
+	{
+		.range_min = KX132_REG_BUF_READ,
+		.range_max = KX132_REG_BUF_READ,
+	},
+};
+
+static const struct regmap_access_table kx132_nir_regs = {
+	.yes_ranges = &kx132_noinc_read_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(kx132_noinc_read_ranges),
+};
+
+static const struct regmap_config kx132_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &kx132_volatile_regs,
+	.rd_table = &kx132_wo_regs,
+	.wr_table = &kx132_ro_regs,
+	.rd_noinc_table = &kx132_nir_regs,
+	.precious_table = &kx132_precious_regs,
+	.max_register = KX132_MAX_REGISTER,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 struct kx022a_data {
 	struct regmap *regmap;
 	const struct kx022a_chip_info *chip_info;
@@ -239,6 +350,13 @@ static const struct iio_chan_spec kx022a_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_chan_spec kx132_channels[] = {
+	KX022A_ACCEL_CHAN(X, KX132_REG_XOUT_L, 0),
+	KX022A_ACCEL_CHAN(Y, KX132_REG_YOUT_L, 1),
+	KX022A_ACCEL_CHAN(Z, KX132_REG_ZOUT_L, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 /*
  * The sensor HW can support ODR up to 1600 Hz, which is beyond what most of the
  * Linux CPUs can handle without dropping samples. Also, the low power mode is
@@ -612,6 +730,26 @@ static int kx022a_get_fifo_bytes(struct kx022a_data *data)
 	return fifo_bytes;
 }
 
+static int kx132_get_fifo_bytes(struct kx022a_data *data)
+{
+	__le16 buf_status;
+	int ret, fifo_bytes;
+
+	ret = regmap_bulk_read(data->regmap, data->chip_info->buf_status1,
+			       &buf_status, sizeof(buf_status));
+	if (ret) {
+		dev_err(data->dev, "Error reading buffer status\n");
+		return ret;
+	}
+
+	fifo_bytes = le16_to_cpu(buf_status);
+	fifo_bytes &= data->chip_info->buf_smp_lvl_mask;
+	fifo_bytes = min_t(int, fifo_bytes, data->chip_info->fifo_length *
+			   KX022A_FIFO_SAMPLES_SIZE_BYTES);
+
+	return fifo_bytes;
+}
+
 static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
 			       bool irq)
 {
@@ -1034,6 +1172,32 @@ const struct kx022a_chip_info kx022a_chip_info = {
 };
 EXPORT_SYMBOL_NS_GPL(kx022a_chip_info, IIO_KX022A);
 
+const struct kx022a_chip_info kx132_chip_info = {
+	.name		  = "kx132-1211",
+	.regmap_config	  = &kx132_regmap_config,
+	.channels	  = kx132_channels,
+	.num_channels	  = ARRAY_SIZE(kx132_channels),
+	.fifo_length	  = KX132_FIFO_LENGTH,
+	.who		  = KX132_REG_WHO,
+	.id		  = KX132_ID,
+	.cntl		  = KX132_REG_CNTL,
+	.cntl2		  = KX132_REG_CNTL2,
+	.odcntl		  = KX132_REG_ODCNTL,
+	.buf_cntl1	  = KX132_REG_BUF_CNTL1,
+	.buf_cntl2	  = KX132_REG_BUF_CNTL2,
+	.buf_clear	  = KX132_REG_BUF_CLEAR,
+	.buf_status1	  = KX132_REG_BUF_STATUS_1,
+	.buf_smp_lvl_mask = KX132_MASK_BUF_SMP_LVL,
+	.buf_read	  = KX132_REG_BUF_READ,
+	.inc1		  = KX132_REG_INC1,
+	.inc4		  = KX132_REG_INC4,
+	.inc5		  = KX132_REG_INC5,
+	.inc6		  = KX132_REG_INC6,
+	.xout_l		  = KX132_REG_XOUT_L,
+	.get_fifo_bytes	  = kx132_get_fifo_bytes,
+};
+EXPORT_SYMBOL_NS_GPL(kx132_chip_info, IIO_KX022A);
+
 int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info)
 {
 	static const char * const regulator_names[] = {"io-vdd", "vdd"};
diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h
index c9f9aee7e597..ea6202d29303 100644
--- a/drivers/iio/accel/kionix-kx022a.h
+++ b/drivers/iio/accel/kionix-kx022a.h
@@ -74,6 +74,57 @@
 #define KX022A_REG_SELF_TEST	0x60
 #define KX022A_MAX_REGISTER	0x60
 
+#define KX132_REG_WHO		0x13
+#define KX132_ID		0x3d
+
+#define KX132_FIFO_LENGTH	86
+
+#define KX132_REG_CNTL		0x1b
+#define KX132_REG_CNTL2		0x1c
+#define KX132_REG_CNTL5		0x1f
+#define KX132_MASK_RES		BIT(6)
+#define KX132_GSEL_2		0x0
+#define KX132_GSEL_4		BIT(3)
+#define KX132_GSEL_8		BIT(4)
+#define KX132_GSEL_16		GENMASK(4, 3)
+
+#define KX132_REG_INS2		0x17
+#define KX132_MASK_INS2_WMI	BIT(5)
+
+#define KX132_REG_XADP_L	0x02
+#define KX132_REG_XOUT_L	0x08
+#define KX132_REG_YOUT_L	0x0a
+#define KX132_REG_ZOUT_L	0x0c
+#define KX132_REG_COTR		0x12
+#define KX132_REG_TSCP		0x14
+#define KX132_REG_INT_REL	0x1a
+
+#define KX132_REG_ODCNTL	0x21
+
+#define KX132_REG_BTS_WUF_TH	0x4a
+
+#define KX132_REG_BUF_CNTL1	0x5e
+#define KX132_REG_BUF_CNTL2	0x5f
+#define KX132_REG_BUF_STATUS_1	0x60
+#define KX132_REG_BUF_STATUS_2	0x61
+#define KX132_MASK_BUF_SMP_LVL	GENMASK(9, 0)
+#define KX132_REG_BUF_CLEAR	0x62
+#define KX132_REG_BUF_READ	0x63
+#define KX132_ODR_SHIFT		3
+#define KX132_FIFO_MAX_WMI_TH	86
+
+#define KX132_REG_INC1		0x22
+#define KX132_REG_INC5		0x26
+#define KX132_REG_INC6		0x27
+#define KX132_IPOL_LOW		0
+#define KX132_IPOL_HIGH		KX022A_MASK_IPOL
+#define KX132_ITYP_PULSE	KX022A_MASK_ITYP
+
+#define KX132_REG_INC4		0x25
+
+#define KX132_REG_SELF_TEST	0x5d
+#define KX132_MAX_REGISTER	0x76
+
 struct device;
 
 struct kx022a_data;
@@ -86,6 +137,7 @@ struct kx022a_data;
  * @channels:		pointer to iio_chan_spec array
  * @num_channels:	number of iio_chan_spec channels
  * @fifo_length:	number of 16-bit samples in a full buffer
+ * @buf_smp_lvl_mask:	buffer sample level mask
  * @who:		WHO_AM_I register
  * @id:			WHO_AM_I register value
  * @cntl:		control register 1
@@ -109,6 +161,7 @@ struct kx022a_chip_info {
 	const struct iio_chan_spec *channels;
 	unsigned int num_channels;
 	unsigned int fifo_length;
+	u16 buf_smp_lvl_mask;
 	u8 who;
 	u8 id;
 	u8 cntl;
@@ -130,5 +183,6 @@ struct kx022a_chip_info {
 int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info);
 
 extern const struct kx022a_chip_info kx022a_chip_info;
+extern const struct kx022a_chip_info kx132_chip_info;
 
 #endif
-- 
2.30.2

[PATCH v7 0/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

[Mehdi Djait]

Hello everyone,

Version 7 for adding support for the kx132-1211 accelerometer

KX132-1211 accelerometer is a sensor which:
	- supports G-ranges of (+/-) 2, 4, 8, and 16G
	- can be connected to I2C or SPI
	- has internal HW FIFO buffer
	- supports various ODRs (output data rates)

The KX132-1211 accelerometer is very similar to the KX022A. 
One key difference is number of bits to report the number of data bytes that 
have been stored in the buffer: 8 bits for KX022A vs 10 bits for
KX132-1211.

Changes in v7:
- added a min_t in kx132_get_fifo_bytes to ensure that we don't that the
  fifo_bytes is never bigger than the 
  fifo_length * KX022A_FIFO_SAMPLES_SIZE_BYTES - no matter what we read from I2C
  as suggested by Matti

Changes in v6:
- check for availability of chip_info for the SPI case
- changed the order of elements in the kx022a_data struct to save memory

Changes in v5:
- moved the "kfree" call to match the reverse of what happens in 
  kx022a_fifo_enable() as suggested by Matti and Jonathan
- used min_t, checked for availability of chip_info and moved the
  position of u16 buf_smp_lvl_mask as suggested by Andy
- introduced buf_smp_lvl_mask in Patch 7 as suggested by Jonathan

Changes in v4:
- moved the allocation of the fifo_buffer to kx022a_fifo_enable and
  kx022a_fifo_disable
- some fixes to the regmap ranges of kx132-1211 

Changes in v3:
- added two new patches by separating the addition of the 
  i2c_device_id table and the removal of blank lines from other
  unrelated changes
- fixes a warning detected by the kernel test robot
- made all the changes related the chip_info in one patch

Changes in v2:
- added a new patch for warning when the device_id match fails in the
  probe function
- added a new patch for the function that retrieves the number of bytes
  in the buffer
- added a change to the Kconfig file in the patch adding the support
  for the kx132-1211
- various fixes and modifications listed under each patch

Mehdi Djait (7):
  dt-bindings: iio: Add KX132-1211 accelerometer
  iio: accel: kionix-kx022a: Remove blank lines
  iio: accel: kionix-kx022a: Warn on failed matches and assume
    compatibility
  iio: accel: kionix-kx022a: Add an i2c_device_id table
  iio: accel: kionix-kx022a: Refactor driver and add chip_info structure
  iio: accel: kionix-kx022a: Add a function to retrieve number of bytes
    in buffer
  iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

 .../bindings/iio/accel/kionix,kx022a.yaml     |  12 +-
 drivers/iio/accel/Kconfig                     |   8 +-
 drivers/iio/accel/kionix-kx022a-i2c.c         |  24 +-
 drivers/iio/accel/kionix-kx022a-spi.c         |  15 +-
 drivers/iio/accel/kionix-kx022a.c             | 314 ++++++++++++++----
 drivers/iio/accel/kionix-kx022a.h             | 110 +++++-
 6 files changed, 408 insertions(+), 75 deletions(-)

-- 
2.30.2

[PATCH v7 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure

[Mehdi Djait]

Add the chip_info structure to the driver's private data to hold all
the device specific infos.
Refactor the kx022a driver implementation to make it more generic and
extensible.

Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v7:
- no changes

v6:
- placed chip_info after the regmap elemnt in kx022a_data struct to save
  memory as suggested by Andy
- added a check for the availability of chip_info for the SPI case as 
  suggested by Andy

v5:
- moved the "kfree" call to match the reverse of what happens in 
  kx022a_fifo_enable() as suggested by Matti and Jonathan
- used min_t, checked for availability of chip_info as suggested by Andy

v4:
- allocating and freeing the buffer moved to the kx022a_fifo{enable,
  disable} functions
- used the spi_get_device_match_data helper function

v3:
- added the change of the buffer's allocation in the __kx022a_fifo_flush
  to this patch
- added the chip_info to the struct kx022a_data

 drivers/iio/accel/kionix-kx022a-i2c.c |  17 +++-
 drivers/iio/accel/kionix-kx022a-spi.c |  13 ++-
 drivers/iio/accel/kionix-kx022a.c     | 116 ++++++++++++++++----------
 drivers/iio/accel/kionix-kx022a.h     |  52 +++++++++++-
 4 files changed, 146 insertions(+), 52 deletions(-)

diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c
index b5a85ce3a891..c59558fc6493 100644
--- a/drivers/iio/accel/kionix-kx022a-i2c.c
+++ b/drivers/iio/accel/kionix-kx022a-i2c.c
@@ -15,6 +15,7 @@
 static int kx022a_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
+	const struct kx022a_chip_info *chip_info;
 	struct regmap *regmap;
 
 	if (!i2c->irq) {
@@ -22,22 +23,30 @@ static int kx022a_i2c_probe(struct i2c_client *i2c)
 		return -EINVAL;
 	}
 
-	regmap = devm_regmap_init_i2c(i2c, &kx022a_regmap);
+	chip_info = device_get_match_data(&i2c->dev);
+	if (!chip_info) {
+		const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
+		chip_info = (const struct kx022a_chip_info *)id->driver_data;
+		if (!chip_info)
+			return -EINVAL;
+	}
+
+	regmap = devm_regmap_init_i2c(i2c, chip_info->regmap_config);
 	if (IS_ERR(regmap))
 		return dev_err_probe(dev, PTR_ERR(regmap),
 				     "Failed to initialize Regmap\n");
 
-	return kx022a_probe_internal(dev);
+	return kx022a_probe_internal(dev, chip_info);
 }
 
 static const struct i2c_device_id kx022a_i2c_id[] = {
-	{ .name = "kx022a" },
+	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id);
 
 static const struct of_device_id kx022a_of_match[] = {
-	{ .compatible = "kionix,kx022a", },
+	{ .compatible = "kionix,kx022a", .data = &kx022a_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c
index 9cd047f7b346..896b57866fc9 100644
--- a/drivers/iio/accel/kionix-kx022a-spi.c
+++ b/drivers/iio/accel/kionix-kx022a-spi.c
@@ -15,6 +15,7 @@
 static int kx022a_spi_probe(struct spi_device *spi)
 {
 	struct device *dev = &spi->dev;
+	const struct kx022a_chip_info *chip_info;
 	struct regmap *regmap;
 
 	if (!spi->irq) {
@@ -22,22 +23,26 @@ static int kx022a_spi_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	regmap = devm_regmap_init_spi(spi, &kx022a_regmap);
+	chip_info = spi_get_device_match_data(spi);
+	if (!chip_info)
+		return -EINVAL;
+
+	regmap = devm_regmap_init_spi(spi, chip_info->regmap_config);
 	if (IS_ERR(regmap))
 		return dev_err_probe(dev, PTR_ERR(regmap),
 				     "Failed to initialize Regmap\n");
 
-	return kx022a_probe_internal(dev);
+	return kx022a_probe_internal(dev, chip_info);
 }
 
 static const struct spi_device_id kx022a_id[] = {
-	{ "kx022a" },
+	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, kx022a_id);
 
 static const struct of_device_id kx022a_of_match[] = {
-	{ .compatible = "kionix,kx022a", },
+	{ .compatible = "kionix,kx022a", .data = &kx022a_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index 494e81ba1da9..0bab3f109e4e 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -48,7 +48,7 @@ enum {
 	KX022A_STATE_FIFO,
 };
 
-/* Regmap configs */
+/* kx022a Regmap configs */
 static const struct regmap_range kx022a_volatile_ranges[] = {
 	{
 		.range_min = KX022A_REG_XHP_L,
@@ -138,7 +138,7 @@ static const struct regmap_access_table kx022a_nir_regs = {
 	.n_yes_ranges = ARRAY_SIZE(kx022a_noinc_read_ranges),
 };
 
-const struct regmap_config kx022a_regmap = {
+static const struct regmap_config kx022a_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.volatile_table = &kx022a_volatile_regs,
@@ -149,10 +149,10 @@ const struct regmap_config kx022a_regmap = {
 	.max_register = KX022A_MAX_REGISTER,
 	.cache_type = REGCACHE_RBTREE,
 };
-EXPORT_SYMBOL_NS_GPL(kx022a_regmap, IIO_KX022A);
 
 struct kx022a_data {
 	struct regmap *regmap;
+	const struct kx022a_chip_info *chip_info;
 	struct iio_trigger *trig;
 	struct device *dev;
 	struct iio_mount_matrix orientation;
@@ -175,6 +175,8 @@ struct kx022a_data {
 	struct mutex mutex;
 	u8 watermark;
 
+	__le16 *fifo_buffer;
+
 	/* 3 x 16bit accel data + timestamp */
 	__le16 buffer[8] __aligned(IIO_DMA_MINALIGN);
 	struct {
@@ -208,7 +210,7 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = {
 	{ }
 };
 
-#define KX022A_ACCEL_CHAN(axis, index)				\
+#define KX022A_ACCEL_CHAN(axis, reg, index)			\
 {								\
 	.type = IIO_ACCEL,					\
 	.modified = 1,						\
@@ -220,7 +222,7 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = {
 				BIT(IIO_CHAN_INFO_SCALE) |	\
 				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
 	.ext_info = kx022a_ext_info,				\
-	.address = KX022A_REG_##axis##OUT_L,			\
+	.address = reg,						\
 	.scan_index = index,					\
 	.scan_type = {                                          \
 		.sign = 's',					\
@@ -231,9 +233,9 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = {
 }
 
 static const struct iio_chan_spec kx022a_channels[] = {
-	KX022A_ACCEL_CHAN(X, 0),
-	KX022A_ACCEL_CHAN(Y, 1),
-	KX022A_ACCEL_CHAN(Z, 2),
+	KX022A_ACCEL_CHAN(X, KX022A_REG_XOUT_L, 0),
+	KX022A_ACCEL_CHAN(Y, KX022A_REG_YOUT_L, 1),
+	KX022A_ACCEL_CHAN(Z, KX022A_REG_ZOUT_L, 2),
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
@@ -332,10 +334,10 @@ static int kx022a_turn_on_off_unlocked(struct kx022a_data *data, bool on)
 	int ret;
 
 	if (on)
-		ret = regmap_set_bits(data->regmap, KX022A_REG_CNTL,
+		ret = regmap_set_bits(data->regmap, data->chip_info->cntl,
 				      KX022A_MASK_PC1);
 	else
-		ret = regmap_clear_bits(data->regmap, KX022A_REG_CNTL,
+		ret = regmap_clear_bits(data->regmap, data->chip_info->cntl,
 					KX022A_MASK_PC1);
 	if (ret)
 		dev_err(data->dev, "Turn %s fail %d\n", str_on_off(on), ret);
@@ -402,7 +404,7 @@ static int kx022a_write_raw(struct iio_dev *idev,
 			break;
 
 		ret = regmap_update_bits(data->regmap,
-					 KX022A_REG_ODCNTL,
+					 data->chip_info->odcntl,
 					 KX022A_MASK_ODR, n);
 		data->odr_ns = kx022a_odrs[n];
 		kx022a_turn_on_unlock(data);
@@ -423,7 +425,7 @@ static int kx022a_write_raw(struct iio_dev *idev,
 		if (ret)
 			break;
 
-		ret = regmap_update_bits(data->regmap, KX022A_REG_CNTL,
+		ret = regmap_update_bits(data->regmap, data->chip_info->cntl,
 					 KX022A_MASK_GSEL,
 					 n << KX022A_GSEL_SHIFT);
 		kx022a_turn_on_unlock(data);
@@ -445,7 +447,7 @@ static int kx022a_fifo_set_wmi(struct kx022a_data *data)
 
 	threshold = data->watermark;
 
-	return regmap_update_bits(data->regmap, KX022A_REG_BUF_CNTL1,
+	return regmap_update_bits(data->regmap, data->chip_info->buf_cntl1,
 				  KX022A_MASK_WM_TH, threshold);
 }
 
@@ -488,7 +490,7 @@ static int kx022a_read_raw(struct iio_dev *idev,
 		return ret;
 
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = regmap_read(data->regmap, KX022A_REG_ODCNTL, &regval);
+		ret = regmap_read(data->regmap, data->chip_info->odcntl, &regval);
 		if (ret)
 			return ret;
 
@@ -503,7 +505,7 @@ static int kx022a_read_raw(struct iio_dev *idev,
 		return IIO_VAL_INT_PLUS_MICRO;
 
 	case IIO_CHAN_INFO_SCALE:
-		ret = regmap_read(data->regmap, KX022A_REG_CNTL, &regval);
+		ret = regmap_read(data->regmap, data->chip_info->cntl, &regval);
 		if (ret < 0)
 			return ret;
 
@@ -530,8 +532,7 @@ static int kx022a_set_watermark(struct iio_dev *idev, unsigned int val)
 {
 	struct kx022a_data *data = iio_priv(idev);
 
-	if (val > KX022A_FIFO_LENGTH)
-		val = KX022A_FIFO_LENGTH;
+	val = min_t(unsigned int, data->chip_info->fifo_length, val);
 
 	mutex_lock(&data->mutex);
 	data->watermark = val;
@@ -592,7 +593,7 @@ static int kx022a_drop_fifo_contents(struct kx022a_data *data)
 	 */
 	data->timestamp = 0;
 
-	return regmap_write(data->regmap, KX022A_REG_BUF_CLEAR, 0x0);
+	return regmap_write(data->regmap, data->chip_info->buf_clear, 0x0);
 }
 
 static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
@@ -600,7 +601,6 @@ static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
 {
 	struct kx022a_data *data = iio_priv(idev);
 	struct device *dev = regmap_get_device(data->regmap);
-	__le16 buffer[KX022A_FIFO_LENGTH * 3];
 	uint64_t sample_period;
 	int count, fifo_bytes;
 	bool renable = false;
@@ -679,13 +679,13 @@ static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
 	}
 
 	fifo_bytes = count * KX022A_FIFO_SAMPLES_SIZE_BYTES;
-	ret = regmap_noinc_read(data->regmap, KX022A_REG_BUF_READ,
-				&buffer[0], fifo_bytes);
+	ret = regmap_noinc_read(data->regmap, data->chip_info->buf_read,
+				data->fifo_buffer, fifo_bytes);
 	if (ret)
 		goto renable_out;
 
 	for (i = 0; i < count; i++) {
-		__le16 *sam = &buffer[i * 3];
+		__le16 *sam = &data->fifo_buffer[i * 3];
 		__le16 *chs;
 		int bit;
 
@@ -732,10 +732,10 @@ static const struct iio_info kx022a_info = {
 static int kx022a_set_drdy_irq(struct kx022a_data *data, bool en)
 {
 	if (en)
-		return regmap_set_bits(data->regmap, KX022A_REG_CNTL,
+		return regmap_set_bits(data->regmap, data->chip_info->cntl,
 				       KX022A_MASK_DRDY);
 
-	return regmap_clear_bits(data->regmap, KX022A_REG_CNTL,
+	return regmap_clear_bits(data->regmap, data->chip_info->cntl,
 				 KX022A_MASK_DRDY);
 }
 
@@ -770,7 +770,7 @@ static int kx022a_fifo_disable(struct kx022a_data *data)
 	if (ret)
 		goto unlock_out;
 
-	ret = regmap_clear_bits(data->regmap, KX022A_REG_BUF_CNTL2,
+	ret = regmap_clear_bits(data->regmap, data->chip_info->buf_cntl2,
 				KX022A_MASK_BUF_EN);
 	if (ret)
 		goto unlock_out;
@@ -779,6 +779,8 @@ static int kx022a_fifo_disable(struct kx022a_data *data)
 
 	kx022a_drop_fifo_contents(data);
 
+	kfree(data->fifo_buffer);
+
 	return kx022a_turn_on_unlock(data);
 
 unlock_out:
@@ -801,6 +803,11 @@ static int kx022a_fifo_enable(struct kx022a_data *data)
 {
 	int ret;
 
+	data->fifo_buffer = kmalloc(data->chip_info->fifo_length *
+				    KX022A_FIFO_SAMPLES_SIZE_BYTES, GFP_KERNEL);
+	if (!data->fifo_buffer)
+		return -ENOMEM;
+
 	ret = kx022a_turn_off_lock(data);
 	if (ret)
 		return ret;
@@ -811,7 +818,7 @@ static int kx022a_fifo_enable(struct kx022a_data *data)
 		goto unlock_out;
 
 	/* Enable buffer */
-	ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2,
+	ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2,
 			      KX022A_MASK_BUF_EN);
 	if (ret)
 		goto unlock_out;
@@ -857,7 +864,7 @@ static irqreturn_t kx022a_trigger_handler(int irq, void *p)
 	struct kx022a_data *data = iio_priv(idev);
 	int ret;
 
-	ret = regmap_bulk_read(data->regmap, KX022A_REG_XOUT_L, data->buffer,
+	ret = regmap_bulk_read(data->regmap, data->chip_info->xout_l, data->buffer,
 			       KX022A_FIFO_SAMPLES_SIZE_BYTES);
 	if (ret < 0)
 		goto err_read;
@@ -905,7 +912,7 @@ static irqreturn_t kx022a_irq_thread_handler(int irq, void *private)
 	if (data->state & KX022A_STATE_FIFO) {
 		int ok;
 
-		ok = __kx022a_fifo_flush(idev, KX022A_FIFO_LENGTH, true);
+		ok = __kx022a_fifo_flush(idev, data->chip_info->fifo_length, true);
 		if (ok > 0)
 			ret = IRQ_HANDLED;
 	}
@@ -958,7 +965,7 @@ static int kx022a_chip_init(struct kx022a_data *data)
 	int ret, val;
 
 	/* Reset the senor */
-	ret = regmap_write(data->regmap, KX022A_REG_CNTL2, KX022A_MASK_SRST);
+	ret = regmap_write(data->regmap, data->chip_info->cntl2, KX022A_MASK_SRST);
 	if (ret)
 		return ret;
 
@@ -968,7 +975,7 @@ static int kx022a_chip_init(struct kx022a_data *data)
 	 */
 	msleep(1);
 
-	ret = regmap_read_poll_timeout(data->regmap, KX022A_REG_CNTL2, val,
+	ret = regmap_read_poll_timeout(data->regmap, data->chip_info->cntl2, val,
 				       !(val & KX022A_MASK_SRST),
 				       KX022A_SOFT_RESET_WAIT_TIME_US,
 				       KX022A_SOFT_RESET_TOTAL_WAIT_TIME_US);
@@ -978,14 +985,14 @@ static int kx022a_chip_init(struct kx022a_data *data)
 		return ret;
 	}
 
-	ret = regmap_reinit_cache(data->regmap, &kx022a_regmap);
+	ret = regmap_reinit_cache(data->regmap, data->chip_info->regmap_config);
 	if (ret) {
 		dev_err(data->dev, "Failed to reinit reg cache\n");
 		return ret;
 	}
 
 	/* set data res 16bit */
-	ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2,
+	ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2,
 			      KX022A_MASK_BRES16);
 	if (ret) {
 		dev_err(data->dev, "Failed to set data resolution\n");
@@ -995,7 +1002,31 @@ static int kx022a_chip_init(struct kx022a_data *data)
 	return kx022a_prepare_irq_pin(data);
 }
 
-int kx022a_probe_internal(struct device *dev)
+const struct kx022a_chip_info kx022a_chip_info = {
+	.name		  = "kx022-accel",
+	.regmap_config	  = &kx022a_regmap_config,
+	.channels	  = kx022a_channels,
+	.num_channels	  = ARRAY_SIZE(kx022a_channels),
+	.fifo_length	  = KX022A_FIFO_LENGTH,
+	.who		  = KX022A_REG_WHO,
+	.id		  = KX022A_ID,
+	.cntl		  = KX022A_REG_CNTL,
+	.cntl2		  = KX022A_REG_CNTL2,
+	.odcntl		  = KX022A_REG_ODCNTL,
+	.buf_cntl1	  = KX022A_REG_BUF_CNTL1,
+	.buf_cntl2	  = KX022A_REG_BUF_CNTL2,
+	.buf_clear	  = KX022A_REG_BUF_CLEAR,
+	.buf_status1	  = KX022A_REG_BUF_STATUS_1,
+	.buf_read	  = KX022A_REG_BUF_READ,
+	.inc1		  = KX022A_REG_INC1,
+	.inc4		  = KX022A_REG_INC4,
+	.inc5		  = KX022A_REG_INC5,
+	.inc6		  = KX022A_REG_INC6,
+	.xout_l		  = KX022A_REG_XOUT_L,
+};
+EXPORT_SYMBOL_NS_GPL(kx022a_chip_info, IIO_KX022A);
+
+int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info)
 {
 	static const char * const regulator_names[] = {"io-vdd", "vdd"};
 	struct iio_trigger *indio_trig;
@@ -1022,6 +1053,7 @@ int kx022a_probe_internal(struct device *dev)
 		return -ENOMEM;
 
 	data = iio_priv(idev);
+	data->chip_info = chip_info;
 
 	/*
 	 * VDD is the analog and digital domain voltage supply and
@@ -1032,24 +1064,24 @@ int kx022a_probe_internal(struct device *dev)
 	if (ret && ret != -ENODEV)
 		return dev_err_probe(dev, ret, "failed to enable regulator\n");
 
-	ret = regmap_read(regmap, KX022A_REG_WHO, &chip_id);
+	ret = regmap_read(regmap, chip_info->who, &chip_id);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to access sensor\n");
 
-	if (chip_id != KX022A_ID)
+	if (chip_id != chip_info->id)
 		dev_warn(dev, "unknown device 0x%x\n", chip_id);
 
 	irq = fwnode_irq_get_byname(fwnode, "INT1");
 	if (irq > 0) {
-		data->inc_reg = KX022A_REG_INC1;
-		data->ien_reg = KX022A_REG_INC4;
+		data->inc_reg = chip_info->inc1;
+		data->ien_reg = chip_info->inc4;
 	} else {
 		irq = fwnode_irq_get_byname(fwnode, "INT2");
 		if (irq <= 0)
 			return dev_err_probe(dev, irq, "No suitable IRQ\n");
 
-		data->inc_reg = KX022A_REG_INC5;
-		data->ien_reg = KX022A_REG_INC6;
+		data->inc_reg = chip_info->inc5;
+		data->ien_reg = chip_info->inc6;
 	}
 
 	data->regmap = regmap;
@@ -1058,9 +1090,9 @@ int kx022a_probe_internal(struct device *dev)
 	data->odr_ns = KX022A_DEFAULT_PERIOD_NS;
 	mutex_init(&data->mutex);
 
-	idev->channels = kx022a_channels;
-	idev->num_channels = ARRAY_SIZE(kx022a_channels);
-	idev->name = "kx022-accel";
+	idev->channels = chip_info->channels;
+	idev->num_channels = chip_info->num_channels;
+	idev->name = chip_info->name;
 	idev->info = &kx022a_info;
 	idev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
 	idev->available_scan_masks = kx022a_scan_masks;
diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h
index 12424649d438..0e5026019213 100644
--- a/drivers/iio/accel/kionix-kx022a.h
+++ b/drivers/iio/accel/kionix-kx022a.h
@@ -76,7 +76,55 @@
 
 struct device;
 
-int kx022a_probe_internal(struct device *dev);
-extern const struct regmap_config kx022a_regmap;
+/**
+ * struct kx022a_chip_info - Kionix accelerometer chip specific information
+ *
+ * @name:		name of the device
+ * @regmap_config:	pointer to register map configuration
+ * @channels:		pointer to iio_chan_spec array
+ * @num_channels:	number of iio_chan_spec channels
+ * @fifo_length:	number of 16-bit samples in a full buffer
+ * @who:		WHO_AM_I register
+ * @id:			WHO_AM_I register value
+ * @cntl:		control register 1
+ * @cntl2:		control register 2
+ * @odcntl:		output data control register
+ * @buf_cntl1:		buffer control register 1
+ * @buf_cntl2:		buffer control register 2
+ * @buf_clear:		buffer clear register
+ * @buf_status1:	buffer status register 1
+ * @buf_read:		buffer read register
+ * @inc1:		interrupt control register 1
+ * @inc4:		interrupt control register 4
+ * @inc5:		interrupt control register 5
+ * @inc6:		interrupt control register 6
+ * @xout_l:		x-axis output least significant byte
+ */
+struct kx022a_chip_info {
+	const char *name;
+	const struct regmap_config *regmap_config;
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+	unsigned int fifo_length;
+	u8 who;
+	u8 id;
+	u8 cntl;
+	u8 cntl2;
+	u8 odcntl;
+	u8 buf_cntl1;
+	u8 buf_cntl2;
+	u8 buf_clear;
+	u8 buf_status1;
+	u8 buf_read;
+	u8 inc1;
+	u8 inc4;
+	u8 inc5;
+	u8 inc6;
+	u8 xout_l;
+};
+
+int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info);
+
+extern const struct kx022a_chip_info kx022a_chip_info;
 
 #endif
-- 
2.30.2

Re: [PATCH v7 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

[Matti Vaittinen]

On 8/9/23 22:11, Mehdi Djait wrote:
> Kionix KX132-1211 is a tri-axis 16-bit accelerometer that can support
> ranges from ±2G to ±16G, digital output through I²C/SPI.
> Add support for basic accelerometer features such as reading acceleration
> via IIO using raw reads, triggered buffer (data-ready), or the WMI IRQ.
> 
> Datasheet: https://kionixfs.azureedge.net/en/document/KX132-1211-Technical-Reference-Manual-Rev-5.0.pdf
> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
> ---
> v7:
> - added a min_t in kx132_get_fifo_bytes to ensure that we don't that the
>    fifo_bytes is never bigger than the
>    fifo_length * KX022A_FIFO_SAMPLES_SIZE_BYTES - no matter what we read from I2C
>    as suggested by Matti

Thanks a lot Mehdi! Looks good to me :)

Yours,
	-- Matti

-- 
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland

~~ When things go utterly wrong vim users can always type :help! ~~

Re: [PATCH v7 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure

[Andy Shevchenko]

On Wed, Aug 09, 2023 at 09:11:36PM +0200, Mehdi Djait wrote:
> Add the chip_info structure to the driver's private data to hold all
> the device specific infos.
> Refactor the kx022a driver implementation to make it more generic and
> extensible.

...

> +	chip_info = device_get_match_data(&i2c->dev);
> +	if (!chip_info) {
> +		const struct i2c_device_id *id = i2c_client_get_device_id(i2c);

Missing blank line.

> +		chip_info = (const struct kx022a_chip_info *)id->driver_data;
> +		if (!chip_info)
> +			return -EINVAL;
> +	}

...

> -	if (val > KX022A_FIFO_LENGTH)
> -		val = KX022A_FIFO_LENGTH;
> +	val = min_t(unsigned int, data->chip_info->fifo_length, val);

min_t() is a beast. Please, use min() if no special requirement for
min_t() here, otherwise explain why.

...

> +	data->fifo_buffer = kmalloc(data->chip_info->fifo_length *
> +				    KX022A_FIFO_SAMPLES_SIZE_BYTES, GFP_KERNEL);

kmalloc_array()

> +	if (!data->fifo_buffer)
> +		return -ENOMEM;

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v7 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure

[Mehdi Djait]

Hello Andy,

Thank you for the review.

On Fri, Aug 11, 2023 at 11:46 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Wed, Aug 09, 2023 at 09:11:36PM +0200, Mehdi Djait wrote:
> > Add the chip_info structure to the driver's private data to hold all
> > the device specific infos.
> > Refactor the kx022a driver implementation to make it more generic and
> > extensible.
>
> ...
>
> > +     chip_info = device_get_match_data(&i2c->dev);
> > +     if (!chip_info) {
> > +             const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
>
> Missing blank line.
>
> > +             chip_info = (const struct kx022a_chip_info *)id->driver_data;
> > +             if (!chip_info)
> > +                     return -EINVAL;
> > +     }
>
> ...
>
> > -     if (val > KX022A_FIFO_LENGTH)
> > -             val = KX022A_FIFO_LENGTH;
> > +     val = min_t(unsigned int, data->chip_info->fifo_length, val);
>
> min_t() is a beast. Please, use min() if no special requirement for
> min_t() here, otherwise explain why.

No actual reason, you suggested min_t or min for a previous version

>
> ...
>
> > +     data->fifo_buffer = kmalloc(data->chip_info->fifo_length *
> > +                                 KX022A_FIFO_SAMPLES_SIZE_BYTES, GFP_KERNEL);
>
> kmalloc_array()

Should I send another version for this ?
The usage of kmalloc is quite straightforward and easy to understand here.

--
Kind Regard
Mehdi Djait

Re: [PATCH v7 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure

[Andy Shevchenko]

On Fri, Aug 11, 2023 at 12:01:23PM +0200, Mehdi Djait wrote:
> On Fri, Aug 11, 2023 at 11:46 AM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > On Wed, Aug 09, 2023 at 09:11:36PM +0200, Mehdi Djait wrote:

...

> > > +     val = min_t(unsigned int, data->chip_info->fifo_length, val);
> >
> > min_t() is a beast. Please, use min() if no special requirement for
> > min_t() here, otherwise explain why.
> 
> No actual reason, you suggested min_t or min for a previous version

After the minmax series (see discussion in LKML) I am pretty sure min_t()
shouldn't be used at all or with very minimum cases where people know what
they are doing.

...

> > > +     data->fifo_buffer = kmalloc(data->chip_info->fifo_length *
> > > +                                 KX022A_FIFO_SAMPLES_SIZE_BYTES, GFP_KERNEL);
> >
> > kmalloc_array()
> 
> Should I send another version for this ?

Sure.

> The usage of kmalloc is quite straightforward and easy to understand here.

Yes, and prone to errors. Multiplication theoretically may overflow and
your code doesn't aware of that, kmalloc_array() does it.

-- 
With Best Regards,
Andy Shevchenko