[PATCH] ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl

[PATCH] ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl

[Stefan Wahren]

There is no need to specify a pinctrl for the reset GPIO. So we better
remove this avoid a potential conflict between pinctrl and pwrseq
after the pinmux driver has been changed to strict:

pinctrl-bcm2835 20200000.gpio: pin gpio41 already requested by wifi-pwrseq;
cannot claim for pinctrl-bcm2835:499
pinctrl-bcm2835 20200000.gpio: pin-41 (pinctrl-bcm2835:499) status -22
pwrseq_simple: probe of wifi-pwrseq failed with error -22

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 644d907..6071213 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -25,8 +25,6 @@
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl_on>;
 		reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
 	};
 };
@@ -98,11 +96,6 @@
 			  "SD_DATA3_R";
 
 	pinctrl-0 = <&gpioout &alt0>;
-
-	wl_on: wl-on {
-		brcm,pins = <41>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
 };
 
 &hdmi {
-- 
2.7.4

Re: [PATCH] ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl

[Eric Anholt]

[-- Attachment #1.1: Type: text/plain, Size: 597 bytes --]

Stefan Wahren <stefan.wahren@i2se.com> writes:

> There is no need to specify a pinctrl for the reset GPIO. So we better
> remove this avoid a potential conflict between pinctrl and pwrseq
> after the pinmux driver has been changed to strict:
>
> pinctrl-bcm2835 20200000.gpio: pin gpio41 already requested by wifi-pwrseq;
> cannot claim for pinctrl-bcm2835:499
> pinctrl-bcm2835 20200000.gpio: pin-41 (pinctrl-bcm2835:499) status -22
> pwrseq_simple: probe of wifi-pwrseq failed with error -22
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>

Reviewed-by: Eric Anholt <eric@anholt.net>

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl

[Stefan Wahren]

Am 21.01.19 um 21:29 schrieb Eric Anholt:
> Stefan Wahren <stefan.wahren@i2se.com> writes:
>
>> There is no need to specify a pinctrl for the reset GPIO. So we better
>> remove this avoid a potential conflict between pinctrl and pwrseq
>> after the pinmux driver has been changed to strict:
>>
>> pinctrl-bcm2835 20200000.gpio: pin gpio41 already requested by wifi-pwrseq;
>> cannot claim for pinctrl-bcm2835:499
>> pinctrl-bcm2835 20200000.gpio: pin-41 (pinctrl-bcm2835:499) status -22
>> pwrseq_simple: probe of wifi-pwrseq failed with error -22
>>
>> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> Reviewed-by: Eric Anholt <eric@anholt.net>

Applied to bcm2835-dt-next

Thanks