From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joshua Clayton Subject: [PATCH v3 2/3] doc: dt: add cyclone-spi binding document Date: Tue, 29 Nov 2016 17:11:04 -0800 Message-ID: <2de74f6d2f2689b8ef090a9017db2ffb3bd319cb.1480467185.git.stillcompiling@gmail.com> References: Return-path: In-Reply-To: In-Reply-To: References: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Alan Tull , Moritz Fischer Cc: Rob Herring , Mark Rutland , Russell King , Joshua Clayton , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org Describe a cyclonei-ps-spi devicetree entry, required features Signed-off-by: Joshua Clayton --- .../bindings/fpga/cyclone-ps-spi-fpga-mgr.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt diff --git a/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt new file mode 100644 index 0000000..c942281 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt @@ -0,0 +1,23 @@ +Altera Cyclone Passive Serial SPI FPGA Manager + +Altera Cyclone FPGAs support a method of loading the bitstream over what is +referred to as "passive serial". +The passive serial link is not technically spi, and might require extra +circuits in order to play nicely with other spi slaves on the same bus. + +See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf + +Required properties: +- compatible : should contain "altr,cyclone-ps-spi-fpga-mgr" +- reg : spi slave id of the fpga +- config-gpio : config pin (referred to as nCONFIG in the cyclone manual) +- status-gpio : status pin (referred to as nSTATUS in the cyclone manual) + +Example: + fpga_spi: evi-fpga-spi@0 { + compatible = "altr,cyclone-ps-spi-fpga-mgr"; + spi-max-frequency = <20000000>; + reg = <0>; + config-gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>; + status-gpio = <&gpio4 11 GPIO_ACTIVE_HIGH>; + }; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html