[PATCH v4 0/3] Add USB/DP combo PHY config for SM6350

[PATCH v4 0/3] Add USB/DP combo PHY config for SM6350

[Luca Weiss]

While this patchset started out as just adding a dedicated init sequence
for SM6350 since USB PHY init didn't work in some cases, now it's also
migrating the phy config and dts over to a new format.

Also note, that the DP portions are pratically untested since TCPM
(type-C port manager) and possibly other components aren't brought up
yet.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Changes in v4:
- Fix dp_serdes offsets in driver, add dp_txa & dp_txb fields (as in v2)
- Fix order of resets in dtsi
- Link to v3: https://lore.kernel.org/r/20221130081430.67831-1-luca.weiss@fairphone.com

---
Luca Weiss (3):
      dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
      phy: qcom-qmp-combo: Add config for SM6350
      arm64: dts: qcom: sm6350: Use specific qmpphy compatible

 .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml         |   1 +
 arch/arm64/boot/dts/qcom/sm6350.dtsi               |  54 +++-----
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c          | 139 ++++++++++++++++++++-
 3 files changed, 154 insertions(+), 40 deletions(-)
---
base-commit: d514392f17fd4d386cfadde7f849d97db4ca1fb0
change-id: 20230120-sm6350-usbphy-87c5e3f0218e

Best regards,
-- 
Luca Weiss <luca.weiss@fairphone.com>

[PATCH v4 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible

[Luca Weiss]

Add the compatible describing the combo phy found on SM6350.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 6f31693d9868..0764cd977e76 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - qcom,sc8280xp-qmp-usb43dp-phy
+      - qcom,sm6350-qmp-usb3-dp-phy
 
   reg:
     maxItems: 1

-- 
2.39.1

[PATCH v4 2/3] phy: qcom-qmp-combo: Add config for SM6350

[Luca Weiss]

Add the tables and config for the combo phy found on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 139 +++++++++++++++++++++++++++++-
 1 file changed, 137 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 1f022e580407..82b46f4c6df0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -309,6 +309,70 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
 };
 
+static const struct qmp_phy_init_tbl sm6350_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl sm6350_usb3_pcs_tbl[] = {
+	/* FLL settings */
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+	/* Lock Det settings */
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xcc),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_DET_HIGH_COUNT_VAL, 0x04),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
+};
+
 static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
@@ -807,6 +871,8 @@ struct qmp_combo_offsets {
 	u16 usb3_pcs;
 	u16 usb3_pcs_usb;
 	u16 dp_serdes;
+	u16 dp_txa;
+	u16 dp_txb;
 	u16 dp_dp_phy;
 };
 
@@ -973,6 +1039,21 @@ static const char * const sc7180_usb3phy_reset_l[] = {
 	"phy",
 };
 
+static const struct qmp_combo_offsets qmp_combo_offsets_v3 = {
+	.com		= 0x0000,
+	.txa		= 0x1200,
+	.rxa		= 0x1400,
+	.txb		= 0x1600,
+	.rxb		= 0x1800,
+	.usb3_serdes	= 0x1000,
+	.usb3_pcs_misc	= 0x1a00,
+	.usb3_pcs	= 0x1c00,
+	.dp_serdes	= 0x2000,
+	.dp_txa		= 0x2200,
+	.dp_txb		= 0x2600,
+	.dp_dp_phy	= 0x2a00,
+};
+
 static const struct qmp_combo_offsets qmp_combo_offsets_v5 = {
 	.com		= 0x0000,
 	.txa		= 0x0400,
@@ -1170,6 +1251,51 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
 	.regs			= qmp_v4_usb3phy_regs_layout,
 };
 
+static const struct qmp_phy_cfg sm6350_usb3dpphy_cfg = {
+	.offsets		= &qmp_combo_offsets_v3,
+
+	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+	.tx_tbl			= qmp_v3_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+	.rx_tbl			= sm6350_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm6350_usb3_rx_tbl),
+	.pcs_tbl		= sm6350_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm6350_usb3_pcs_tbl),
+
+	.dp_serdes_tbl		= qmp_v3_dp_serdes_tbl,
+	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+	.dp_tx_tbl		= qmp_v3_dp_tx_tbl,
+	.dp_tx_tbl_num		= ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+	.serdes_tbl_rbr		= qmp_v3_dp_serdes_tbl_rbr,
+	.serdes_tbl_rbr_num	= ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+	.serdes_tbl_hbr		= qmp_v3_dp_serdes_tbl_hbr,
+	.serdes_tbl_hbr_num	= ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+	.serdes_tbl_hbr2	= qmp_v3_dp_serdes_tbl_hbr2,
+	.serdes_tbl_hbr2_num	= ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+	.serdes_tbl_hbr3	= qmp_v3_dp_serdes_tbl_hbr3,
+	.serdes_tbl_hbr3_num	= ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+	.swing_hbr_rbr		= &qmp_dp_v3_voltage_swing_hbr_rbr,
+	.pre_emphasis_hbr_rbr	= &qmp_dp_v3_pre_emphasis_hbr_rbr,
+	.swing_hbr3_hbr2	= &qmp_dp_v3_voltage_swing_hbr3_hbr2,
+	.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
+
+	.dp_aux_init		= qmp_v3_dp_aux_init,
+	.configure_dp_tx	= qmp_v3_configure_dp_tx,
+	.configure_dp_phy	= qmp_v3_configure_dp_phy,
+	.calibrate_dp_phy	= qmp_v3_calibrate_dp_phy,
+
+	.clk_list		= qmp_v4_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
 	.serdes_tbl		= sm8150_usb3_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_serdes_tbl),
@@ -2639,8 +2765,13 @@ static int qmp_combo_parse_dt(struct qmp_combo *qmp)
 	qmp->pcs_usb = base + offs->usb3_pcs_usb;
 
 	qmp->dp_serdes = base + offs->dp_serdes;
-	qmp->dp_tx = base + offs->txa;
-	qmp->dp_tx2 = base + offs->txb;
+	if (offs->dp_txa) {
+		qmp->dp_tx = base + offs->dp_txa;
+		qmp->dp_tx2 = base + offs->dp_txb;
+	} else {
+		qmp->dp_tx = base + offs->txa;
+		qmp->dp_tx2 = base + offs->txb;
+	}
 	qmp->dp_dp_phy = base + offs->dp_dp_phy;
 
 	qmp->pipe_clk = devm_clk_get(dev, "usb3_pipe");
@@ -2787,6 +2918,10 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
 		.compatible = "qcom,sdm845-qmp-usb3-dp-phy",
 		.data = &sdm845_usb3dpphy_cfg,
 	},
+	{
+		.compatible = "qcom,sm6350-qmp-usb3-dp-phy",
+		.data = &sm6350_usb3dpphy_cfg,
+	},
 	{
 		.compatible = "qcom,sm8250-qmp-usb3-dp-phy",
 		.data = &sm8250_usb3dpphy_cfg,

-- 
2.39.1

Re: [PATCH v4 2/3] phy: qcom-qmp-combo: Add config for SM6350

[Johan Hovold]

On Mon, Jan 23, 2023 at 02:29:50PM +0100, Luca Weiss wrote:
> Add the tables and config for the combo phy found on SM6350.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>

[PATCH v4 3/3] arm64: dts: qcom: sm6350: Use specific qmpphy compatible

[Luca Weiss]

The sc7180 phy compatible works fine for some cases, but it turns out
sm6350 does need proper phy configuration in the driver, so use the
newly added sm6350 compatible.

Because the sm6350 compatible is using the new binding, we need to
change the node quite a bit to match it.

This fixes qmpphy init when no USB cable is plugged in during bootloader
stage.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 54 +++++++++++-------------------------
 1 file changed, 16 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8224adb99948..128dbbe23ef5 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interconnect/qcom,sm6350.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
@@ -1314,49 +1315,26 @@ usb_1_hsphy: phy@88e3000 {
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
-			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm6350-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&xo_board>,
-				 <&rpmhcc RPMH_QLINK_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
+			status = "disabled";
 		};
 
 		dc_noc: interconnect@9160000 {
@@ -1430,7 +1408,7 @@ usb_1_dwc3: usb@a600000 {
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};

-- 
2.39.1

Re: [PATCH v4 3/3] arm64: dts: qcom: sm6350: Use specific qmpphy compatible

[Konrad Dybcio]

On 23.01.2023 14:29, Luca Weiss wrote:
> The sc7180 phy compatible works fine for some cases, but it turns out
> sm6350 does need proper phy configuration in the driver, so use the
> newly added sm6350 compatible.
> 
> Because the sm6350 compatible is using the new binding, we need to
> change the node quite a bit to match it.
> 
> This fixes qmpphy init when no USB cable is plugged in during bootloader
> stage.
> 
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6350.dtsi | 54 +++++++++++-------------------------
>  1 file changed, 16 insertions(+), 38 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 8224adb99948..128dbbe23ef5 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -13,6 +13,7 @@
>  #include <dt-bindings/interconnect/qcom,sm6350.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/phy/phy-qcom-qmp.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  
> @@ -1314,49 +1315,26 @@ usb_1_hsphy: phy@88e3000 {
>  			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
>  		};
>  
> -		usb_1_qmpphy: phy@88e9000 {
> -			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
> -			reg = <0 0x088e9000 0 0x200>,
> -			      <0 0x088e8000 0 0x40>,
> -			      <0 0x088ea000 0 0x200>;
> -			status = "disabled";
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
> +		usb_1_qmpphy: phy@88e8000 {
> +			compatible = "qcom,sm6350-qmp-usb3-dp-phy";
> +			reg = <0 0x088e8000 0 0x3000>;
>  
>  			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> -				 <&xo_board>,
> -				 <&rpmhcc RPMH_QLINK_CLK>,
> -				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> -			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
> +
> +			power-domains = <&gcc USB30_PRIM_GDSC>;
>  
> -			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
> -				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
> +			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> +				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
>  			reset-names = "phy", "common";
>  
> -			usb_1_ssphy: usb3-phy@88e9200 {
> -				reg = <0 0x088e9200 0 0x200>,
> -				      <0 0x088e9400 0 0x200>,
> -				      <0 0x088e9c00 0 0x400>,
> -				      <0 0x088e9600 0 0x200>,
> -				      <0 0x088e9800 0 0x200>,
> -				      <0 0x088e9a00 0 0x100>;
> -				#clock-cells = <0>;
> -				#phy-cells = <0>;
> -				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> -				clock-names = "pipe0";
> -				clock-output-names = "usb3_phy_pipe_clk_src";
> -			};
> +			#clock-cells = <1>;
> +			#phy-cells = <1>;
>  
> -			dp_phy: dp-phy@88ea200 {
> -				reg = <0 0x088ea200 0 0x200>,
> -				      <0 0x088ea400 0 0x200>,
> -				      <0 0x088eaa00 0 0x200>,
> -				      <0 0x088ea600 0 0x200>,
> -				      <0 0x088ea800 0 0x200>;
> -				#phy-cells = <0>;
> -				#clock-cells = <1>;
> -			};
> +			status = "disabled";
>  		};
>  
>  		dc_noc: interconnect@9160000 {
> @@ -1430,7 +1408,7 @@ usb_1_dwc3: usb@a600000 {
>  				snps,dis_enblslpm_quirk;
>  				snps,has-lpm-erratum;
>  				snps,hird-threshold = /bits/ 8 <0x10>;
> -				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
> +				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
>  				phy-names = "usb2-phy", "usb3-phy";
>  			};
>  		};
> 

Re: [PATCH v4 0/3] Add USB/DP combo PHY config for SM6350

[Vinod Koul]

On 23-01-23, 14:29, Luca Weiss wrote:
> While this patchset started out as just adding a dedicated init sequence
> for SM6350 since USB PHY init didn't work in some cases, now it's also
> migrating the phy config and dts over to a new format.
> 
> Also note, that the DP portions are pratically untested since TCPM
> (type-C port manager) and possibly other components aren't brought up
> yet.

Applied 1-2, thanks

> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>

cover doesnt need sob :)

> ---
> Changes in v4:
> - Fix dp_serdes offsets in driver, add dp_txa & dp_txb fields (as in v2)
> - Fix order of resets in dtsi
> - Link to v3: https://lore.kernel.org/r/20221130081430.67831-1-luca.weiss@fairphone.com
> 
> ---
> Luca Weiss (3):
>       dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
>       phy: qcom-qmp-combo: Add config for SM6350
>       arm64: dts: qcom: sm6350: Use specific qmpphy compatible
> 
>  .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml         |   1 +
>  arch/arm64/boot/dts/qcom/sm6350.dtsi               |  54 +++-----
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c          | 139 ++++++++++++++++++++-
>  3 files changed, 154 insertions(+), 40 deletions(-)
> ---
> base-commit: d514392f17fd4d386cfadde7f849d97db4ca1fb0
> change-id: 20230120-sm6350-usbphy-87c5e3f0218e
> 
> Best regards,
> -- 
> Luca Weiss <luca.weiss@fairphone.com>

-- 
~Vinod

Re: [PATCH v4 0/3] Add USB/DP combo PHY config for SM6350

[Luca Weiss]

On Thu Feb 2, 2023 at 2:19 PM CET, Vinod Koul wrote:
> On 23-01-23, 14:29, Luca Weiss wrote:
> > While this patchset started out as just adding a dedicated init sequence
> > for SM6350 since USB PHY init didn't work in some cases, now it's also
> > migrating the phy config and dts over to a new format.
> > 
> > Also note, that the DP portions are pratically untested since TCPM
> > (type-C port manager) and possibly other components aren't brought up
> > yet.
>
> Applied 1-2, thanks

Thanks!

>
> > 
> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>
> cover doesnt need sob :)

That comes from b4 ;)
https://b4.docs.kernel.org/

>
> > ---
> > Changes in v4:
> > - Fix dp_serdes offsets in driver, add dp_txa & dp_txb fields (as in v2)
> > - Fix order of resets in dtsi
> > - Link to v3: https://lore.kernel.org/r/20221130081430.67831-1-luca.weiss@fairphone.com
> > 
> > ---
> > Luca Weiss (3):
> >       dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
> >       phy: qcom-qmp-combo: Add config for SM6350
> >       arm64: dts: qcom: sm6350: Use specific qmpphy compatible
> > 
> >  .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml         |   1 +
> >  arch/arm64/boot/dts/qcom/sm6350.dtsi               |  54 +++-----
> >  drivers/phy/qualcomm/phy-qcom-qmp-combo.c          | 139 ++++++++++++++++++++-
> >  3 files changed, 154 insertions(+), 40 deletions(-)
> > ---
> > base-commit: d514392f17fd4d386cfadde7f849d97db4ca1fb0
> > change-id: 20230120-sm6350-usbphy-87c5e3f0218e
> > 
> > Best regards,
> > -- 
> > Luca Weiss <luca.weiss@fairphone.com>
>
> -- 
> ~Vinod

Re: [PATCH v4 0/3] Add USB/DP combo PHY config for SM6350

[Konstantin Ryabitsev]

February 2, 2023 8:39 AM, "Luca Weiss" <luca.weiss@fairphone.com> wrote:
> On Thu Feb 2, 2023 at 2:19 PM CET, Vinod Koul wrote:
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> 
>> cover doesnt need sob :)
> 
> That comes from b4 ;)
> https://b4.docs.kernel.org

There's a number of subsystems that will use the cover letter as the base message for the merge commit, which is why the signoff is added to the cover.

-K

Re: (subset) [PATCH v4 0/3] Add USB/DP combo PHY config for SM6350

[Bjorn Andersson]

On Mon, 23 Jan 2023 14:29:48 +0100, Luca Weiss wrote:
> While this patchset started out as just adding a dedicated init sequence
> for SM6350 since USB PHY init didn't work in some cases, now it's also
> migrating the phy config and dts over to a new format.
> 
> Also note, that the DP portions are pratically untested since TCPM
> (type-C port manager) and possibly other components aren't brought up
> yet.
> 
> [...]

Applied, thanks!

[3/3] arm64: dts: qcom: sm6350: Use specific qmpphy compatible
      commit: 5ed2b6388b310521fdaa81cf5e075c20e9d0006c

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>