devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Riesch <michael.riesch@wolfvision.net>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
	Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Christopher Obbard <chris.obbard@collabora.com>,
	Benjamin Gaignard <benjamin.gaignard@collabora.com>,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: Re: [PATCHv4 7/7] arm64: dts: rockchip: Add rock-5b board
Date: Mon, 28 Nov 2022 07:54:09 +0100	[thread overview]
Message-ID: <2f0a504e-99a9-deb4-8693-c490d13f52a8@wolfvision.net> (raw)
In-Reply-To: <20221124144928.35381-8-sebastian.reichel@collabora.com>

Hi Sebastian,

On 11/24/22 15:49, Sebastian Reichel wrote:
> From: Christopher Obbard <chris.obbard@collabora.com>
> 
> Add board file for the RK3588 Rock 5B board. This is a basic
> implementation which just brings up the eMMC and UART which is
> enough to successfully boot Linux.
> 
> The ethernet controller is connected via PCIe so support will
> come in a follow-up patch.
> 
> Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>

Thanks and best regards,
Michael

> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |  1 +
>  .../boot/dts/rockchip/rk3588-rock-5b.dts      | 44 +++++++++++++++++++
>  2 files changed, 45 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 31fa55750a0f..b31aa1b0e9e3 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -73,4 +73,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> new file mode 100644
> index 000000000000..baf46bd30b38
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588.dtsi"
> +
> +/ {
> +	model = "Radxa Rock 5B Board";
> +	compatible = "radxa,rock-5b", "rockchip,rk3588";
> +
> +	aliases {
> +		mmc1 = &sdhci;
> +		serial2 = &uart2;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	vcc5v0_sys: vcc5v0-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	max-frequency = <200000000>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-0 = <&uart2m0_xfer>;
> +	status = "okay";
> +};

      reply	other threads:[~2022-11-28  6:54 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-24 14:49 [PATCHv4 0/7] Initial rk3588 DT Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 1/7] dt-bindings: soc: rockchip: add initial rk3588 syscon compatibles Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 2/7] arm64: dts: rockchip: Add rk3588 pinctrl data Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 3/7] arm64: dts: rockchip: Add base DT for rk3588 SoC Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 4/7] dt-bindings: arm: rockchip: add initial rk3588 boards Sebastian Reichel
2022-11-24 14:49 ` [PATCHv4 5/7] arm64: dts: rockchip: Add rk3588-evb1 board Sebastian Reichel
2022-11-28  6:56   ` Michael Riesch
2022-11-24 14:49 ` [PATCHv4 6/7] arm64: dts: rockchip: Add rock-5a board Sebastian Reichel
2022-11-28  6:52   ` Michael Riesch
2022-11-24 14:49 ` [PATCHv4 7/7] arm64: dts: rockchip: Add rock-5b board Sebastian Reichel
2022-11-28  6:54   ` Michael Riesch [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2f0a504e-99a9-deb4-8693-c490d13f52a8@wolfvision.net \
    --to=michael.riesch@wolfvision.net \
    --cc=benjamin.gaignard@collabora.com \
    --cc=chris.obbard@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=kernel@collabora.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.reichel@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).