Devicetree
 help / color / mirror / Atom feed
From: Jonas Jelonek <jelonek.jonas@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
	Sander Vanheule <sander@svanheule.net>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	Kory Maincent <kory.maincent@bootlin.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next 1/2] dt-bindings: net: pse-pd: realtek,pse: add gen1 I2C transport
Date: Tue, 20 Oct 2026 10:13:17 +0200	[thread overview]
Message-ID: <2f64d2b7-f23d-4c99-ae1d-7404079dcde5@gmail.com> (raw)
In-Reply-To: <20261020-noisy-amorphous-jackal-1df08a@quoll>

Hi,

On 20.10.26 09:27, Krzysztof Kozlowski wrote:
> On Sun, Oct 18, 2026 at 06:12:47PM +0200, Sander Vanheule wrote:
>> Like the gen2 protocol, the gen1 protocol can also be used over both a
>> raw I2C transport and an SMBUs transport. Add a compatible for the
>> former and the compatible for the Ubiquiti Unifi Switch Lite 16 PoE
>> device that uses it.
>>
>> Signed-off-by: Sander Vanheule <sander@svanheule.net>
>> ---
>>  .../bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml          | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
>> index 3bb32349c28c..526f8525bb4d 100644
>> --- a/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
>> +++ b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
>> @@ -54,6 +54,12 @@ properties:
>>                - zyxel,gs1920-24hp-v2-pse
>>            - const: realtek,pse-mcu-gen1-smbus
>>  
>> +      # I2C, raw framing
>> +      - items:
>> +          - enum:
>> +              - ubnt,usw-lite-16-poe-pse
>> +          - const: realtek,pse-mcu-gen1-i2c
>> +
>>        # UART
>>        - items:
>>            - enum:
>> @@ -100,6 +106,7 @@ allOf:
>>            contains:
>>              enum:
>>                - realtek,pse-mcu-gen1-smbus
>> +              - realtek,pse-mcu-gen1-i2c
> That's the same device as smbus, no? Same device, same compatible.

Physically it's the same device/MCU but the baked-in firmware and configuration
differs. Same for the UART vs. SMBus.

> You can have property deciding about protocol, if this cannot be deduced
> from the clients.

This was the approach in the early versions of the driver when I sent it
to the list. Rob favored the current way [1] and I think Conor was ok
with it later on.

[1] https://lore.kernel.org/netdev/20260615212959.GA1679454-robh@kernel.org/

> Best regards,
> Krzysztof

Best,
Jonas

  reply	other threads:[~2026-10-20  8:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-18 16:12 [PATCH net-next 0/2] net: pse-pd: Plain I2C transport for Realtek Gen1 Sander Vanheule
2026-10-18 16:12 ` [PATCH net-next 1/2] dt-bindings: net: pse-pd: realtek,pse: add gen1 I2C transport Sander Vanheule
2026-10-20  7:27   ` Krzysztof Kozlowski
2026-10-20  8:13     ` Jonas Jelonek [this message]
2026-10-20 12:27   ` Krzysztof Kozlowski
2026-10-18 16:12 ` [PATCH net-next 2/2] net: pse-pd: realtek-pse-mcu: " Sander Vanheule
2026-10-19  5:51   ` Oleksij Rempel
2026-10-19  6:56   ` Jonas Jelonek
2026-10-19  9:16 ` [PATCH net-next 0/2] net: pse-pd: Plain I2C transport for Realtek Gen1 Kory Maincent

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2f64d2b7-f23d-4c99-ae1d-7404079dcde5@gmail.com \
    --to=jelonek.jonas@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=sander@svanheule.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox