Re: [RFC PATCH v3 02/37] dt-bindings: soc: kvx: Add binding for kalray,coolidge-pwr-ctrl

[Krzysztof Kozlowski <krzk@kernel.org>]

On 22/07/2024 11:41, ysionneau@kalrayinc.com wrote:
> From: Yann Sionneau <ysionneau@kalrayinc.com>
> 
> Add binding for Kalray Coolidge SoC cluster power controller.
> 
> Signed-off-by: Yann Sionneau <ysionneau@kalrayinc.com>
> ---
> 
> Notes:
> 
> V2 -> V3: New patch
> ---
>  .../soc/kvx/kalray,coolidge-pwr-ctrl.yaml     | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/kvx/kalray,coolidge-pwr-ctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/kvx/kalray,coolidge-pwr-ctrl.yaml b/Documentation/devicetree/bindings/soc/kvx/kalray,coolidge-pwr-ctrl.yaml
> new file mode 100644
> index 0000000000000..e0363a080ac11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/kvx/kalray,coolidge-pwr-ctrl.yaml
> @@ -0,0 +1,37 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/kalray/kalray,coolidge-pwr-ctrl.yaml#

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

Best regards,
Krzysztof