From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-sh@vger.kernel.org, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: shmobile: r8a7794: add internal PCI bridge nodes
Date: Sun, 13 Sep 2015 01:30:05 +0300 [thread overview]
Message-ID: <3051459.2yiprFO374@wasted.cogentembedded.com> (raw)
In-Reply-To: <3151312.grtDDBsSl8@wasted.cogentembedded.com>
Add device nodes for the R8A7794 internal PCI bridge devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm/boot/dts/r8a7794.dtsi | 42 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
@@ -648,6 +648,48 @@
status = "disabled";
};
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7794";
+ device_type = "pci";
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7794";
+ device_type = "pci";
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
next prev parent reply other threads:[~2015-09-12 22:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-12 22:28 [PATCH 0/2] Add R8A7794/SILK board PCI USB DT support Sergei Shtylyov
2015-09-12 22:30 ` Sergei Shtylyov [this message]
2015-09-12 22:32 ` [PATCH 2/2] ARM: shmobile: silk: enable internal PCI Sergei Shtylyov
[not found] ` <3151312.grtDDBsSl8-gHKXc3Y1Z8zGSmamagVegGFoWSdPRAKMAL8bYrjMMd8@public.gmane.org>
2015-09-12 22:33 ` [PATCH 0/2] Add R8A7794/SILK board PCI USB DT support Sergei Shtylyov
2015-09-29 0:36 ` Simon Horman
2015-09-29 12:18 ` Sergei Shtylyov
2015-09-30 8:43 ` Simon Horman
2015-10-12 22:12 ` [PATCH] ARM: shmobile: porter: enable internal PCI and USB PHY Sergei Shtylyov
2015-10-13 1:01 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3051459.2yiprFO374@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=horms@verge.net.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).