From: Tomasz Figa <tomasz.figa@gmail.com>
To: Rahul Sharma <rahul.sharma@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
kgene.kim@samsung.com, sw0312.kim@samsung.com,
inki.dae@samsung.com, s.nawrocki@samsung.com, joshi@samsung.com,
r.sh.open@gmail.com
Subject: Re: [PATCH v5 0/6] ARM: dts: add support for exynos hdmi subsystem
Date: Tue, 27 Aug 2013 01:42:39 +0200 [thread overview]
Message-ID: <3096714.XGeJNyPCXd@flatron> (raw)
In-Reply-To: <1377509901-9467-1-git-send-email-rahul.sharma@samsung.com>
Hi Rahul,
On Monday 26 of August 2013 15:08:15 Rahul Sharma wrote:
> It adds Device tree nodes and clocks information for HDMI subsystem
> for exynos5420 and exynos5250 SoCs. It adds pinctrl node for hdmi
> hpd gpio and update binding documents.
>
> This set is based on kukjin's for-next branch at
> http://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git.
>
> v5:
> 1) Merged Clock addition patch to DT nmde addition patch.
> 2) Add dout_pixel clock for hdmi in place of sclk_pixel.
> 3) Enable mixer node in soc dtsi file.
>
> v4:
> 1) Remove the movement of common properties to Exynos5.dtsi for
> I2C and hdmi subsystem.
> 2) Change the title of the patches.
>
> v3:
> 1) Rebase to kgene for-next based on 3.11-rc1.
> 2) Changes clock numbers as per updated clocks file for
> exyno5250 and exynos5420.
> 3) Dropped Sachin patch as already got merged.
>
> v2:
> 1) Added patch for moving common i2c properties to exynos5.dtsi
> 2) Added patch for moving common hdmi, mixer properties to exynos5.dtsi
> 3) moved hpd pinctrl node to board file.
> 4) Added Sachin's patch to update binding document for hdmi with hpd
> information.
>
>
>
> Andrew Bresticker (1):
> ARM: dts: add i2c device nodes for Exynos5420
>
> Rahul Sharma (4):
> ARM: dts: add clocks to hdmi dt node for exynos5250
> ARM: dts: add dt nodes for hdmi subsystem for exynos5420
> ARM: dts: add hdmi hpd gpio pinctrl node for exynos5420
> of/documentation: update with clock information for exynos hdmi
> subsystem
>
> Sean Paul (1):
> ARM: dts: add mixer clocks to mixer node for Exynos5250
>
> .../devicetree/bindings/video/exynos_hdmi.txt | 14 +++-
> .../devicetree/bindings/video/exynos_mixer.txt | 4 ++
> arch/arm/boot/dts/exynos5250.dtsi | 8 ++-
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 26 +++++++
> arch/arm/boot/dts/exynos5420.dtsi | 75
> ++++++++++++++++++++ 5 files changed, 123 insertions(+), 4 deletions(-)
Except patches 4-6, which I have commented on, for the series:
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Also one minor comment: It would be better if you updated the
documentation as first patch. This would make all the following patches to
be based on already existing documentation.
Best regards,
Tomasz
next prev parent reply other threads:[~2013-08-26 23:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-26 9:38 [PATCH v5 0/6] ARM: dts: add support for exynos hdmi subsystem Rahul Sharma
2013-08-26 9:38 ` [PATCH v5 1/6] ARM: dts: add mixer clocks to mixer node for Exynos5250 Rahul Sharma
2013-08-26 9:38 ` [PATCH v5 2/6] ARM: dts: add clocks to hdmi dt node for exynos5250 Rahul Sharma
2013-08-26 9:38 ` [PATCH v5 3/6] ARM: dts: add i2c device nodes for Exynos5420 Rahul Sharma
2013-08-26 9:38 ` [PATCH v5 4/6] ARM: dts: add dt nodes for exynos5420 hdmi subsystem Rahul Sharma
2013-08-26 23:29 ` Tomasz Figa
2013-08-27 3:56 ` Rahul Sharma
2013-08-26 9:38 ` [PATCH v5 5/6] ARM: dts: add hdmi hpd gpio pinctrl node for exynos5420 Rahul Sharma
2013-08-26 9:38 ` [PATCH v5 6/6] of/documentation: update with clock information for exynos hdmi subsystem Rahul Sharma
2013-08-26 23:40 ` Tomasz Figa
2013-08-27 5:05 ` Rahul Sharma
2013-08-26 23:42 ` Tomasz Figa [this message]
2013-08-27 5:29 ` [PATCH v5 0/6] ARM: dts: add support " Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3096714.XGeJNyPCXd@flatron \
--to=tomasz.figa@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=rahul.sharma@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=sw0312.kim@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).