devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
To: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
	josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
	linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] ARM: tegra: dalmore: fix irq trigger type
Date: Tue, 11 Feb 2014 22:21:15 +0100	[thread overview]
Message-ID: <30f0db808e7543d9ab6b077aa5e239f2@agner.ch> (raw)
In-Reply-To: <20140211204737.GA1895@mithrandir>

Am 2014-02-11 21:47, schrieb Thierry Reding:
> On Tue, Feb 11, 2014 at 09:11:32PM +0100, Stefan Agner wrote:
>> Trigger type needs to be IRQ_TYPE_LEVEL_HIGH since the interrupt
>> signal gets inverted by the PMC (configured by the invert-interrupt
>> property).
> 
> Isn't the reason the other way around? The PMIC generates a low-level
> interrupt, but the GIC can only be configured to accept high-level (or
> rising edge) and therefore the nvidia,invert-interrupt property needs to
> be set in the PMC node?
Hm yes agreed. I should also write the whole story here, maybe this:

The GIC only support high-active interrupts. When using a PMIC with
low-active interrupt, the PMC has to be configured by using the
nvidia,invert-interrupt property in its node.

This fix sets the GIC back to high-active and reverts commit
eca8f98e404934027f84f72882c5e92ffbd9e5f5.

> One nitpick below.
> 
>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
> [...]
>> @@ -888,8 +888,9 @@
>>  		palmas: tps65913@58 {
>>  			compatible = "ti,palmas";
>>  			reg = <0x58>;
>> -			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
>>
>> +			/* active-low configured by PMC invert-interrupt */
>> +			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> 
> I'd prefer to keep the properties grouped as before. interrupts is a
> "client" property, whereas #interrupt-cells and interrupt-controller
> are "provider" properties.
> 
> And I think the comment would be more appropriate in the pmc node, for
> the same reason that I think the commit description isn't entirely
> accurate.
Well, its kind a question where you are coming from. I read the data
sheet/schemata, and saw that its low-active. Then I went to the PMIC
node and checked how that interrupt is configured, and what you see is
HIGH_ACTIVE. You then think you've found the bug and fix it by setting
it to IRQ_TYPE_LEVEL_LOW. What you don't know is that PMC is in between
and alters the polarity...

      reply	other threads:[~2014-02-11 21:21 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-11 20:11 [PATCH] ARM: tegra: dalmore: fix irq trigger type Stefan Agner
2014-02-11 20:47 ` Thierry Reding
2014-02-11 21:21   ` Stefan Agner [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=30f0db808e7543d9ab6b077aa5e239f2@agner.ch \
    --to=stefan-xlvq0vzyd2y@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
    --cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).