From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: devicetree@vger.kernel.org, airlied@linux.ie,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-renesas-soc@vger.kernel.org, peda@axentia.se,
linux-media@vger.kernel.org
Subject: Re: [PATCH 1/8] drm: bridge: Add support for static image formats
Date: Mon, 23 Apr 2018 12:27:39 +0300 [thread overview]
Message-ID: <3108314.q4SV6s3NXE@avalon> (raw)
In-Reply-To: <1524130269-32688-2-git-send-email-jacopo+renesas@jmondi.org>
Hi Jacopo,
Thank you for the patch.
On Thursday, 19 April 2018 12:31:02 EEST Jacopo Mondi wrote:
> Add support for storing image format information in DRM bridges with
> associated helper function.
>
> This patch replicates for bridges what 'drm_display_info_set_bus_formats()'
> is for connectors.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> drivers/gpu/drm/drm_bridge.c | 30 ++++++++++++++++++++++++++++++
> include/drm/drm_bridge.h | 8 ++++++++
> 2 files changed, 38 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> index 1638bfe..e2ad098 100644
> --- a/drivers/gpu/drm/drm_bridge.c
> +++ b/drivers/gpu/drm/drm_bridge.c
> @@ -157,6 +157,36 @@ void drm_bridge_detach(struct drm_bridge *bridge)
> }
>
> /**
> + * drm_bridge_set_bus_formats() - set bridge supported image formats
> + * @bridge: the bridge to set image formats in
> + * @formats: array of MEDIA_BUS_FMT\_ supported image formats
Why the \ (here and below) ?
> + * @num_formats: number of elements in the @formats array
> + *
> + * Store a list of supported image formats in a bridge.
> + * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h
> for
> + * a full list of available formats.
> + */
> +int drm_bridge_set_bus_formats(struct drm_bridge *bridge, const u32
> *formats,
> + unsigned int num_formats)
> +{
> + u32 *fmts;
> +
> + if (!formats || !num_formats)
> + return -EINVAL;
> +
> + fmts = kmemdup(formats, sizeof(*formats) * num_formats, GFP_KERNEL);
This memory will be leaked when the bridge is destroyed.
> + if (!fmts)
> + return -ENOMEM;
> +
> + kfree(bridge->bus_formats);
> + bridge->bus_formats = fmts;
> + bridge->num_bus_formats = num_formats;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_bridge_set_bus_formats);
> +
> +/**
> * DOC: bridge callbacks
> *
> * The &drm_bridge_funcs ops are populated by the bridge driver. The DRM
> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> index 3270fec..6b3648c 100644
> --- a/include/drm/drm_bridge.h
> +++ b/include/drm/drm_bridge.h
> @@ -258,6 +258,9 @@ struct drm_bridge_timings {
> * @encoder: encoder to which this bridge is connected
> * @next: the next bridge in the encoder chain
> * @of_node: device node pointer to the bridge
> + * @bus_formats: wire image formats. Array of @num_bus_formats
> MEDIA_BUS_FMT\_
> + * elements
> + * @num_bus_formats: size of @bus_formats array
> * @list: to keep track of all added bridges
> * @timings: the timing specification for the bridge, if any (may
> * be NULL)
> @@ -271,6 +274,9 @@ struct drm_bridge {
> #ifdef CONFIG_OF
> struct device_node *of_node;
> #endif
> + const u32 *bus_formats;
> + unsigned int num_bus_formats;
> +
> struct list_head list;
> const struct drm_bridge_timings *timings;
>
> @@ -296,6 +302,8 @@ void drm_bridge_mode_set(struct drm_bridge *bridge,
> struct drm_display_mode *adjusted_mode);
> void drm_bridge_pre_enable(struct drm_bridge *bridge);
> void drm_bridge_enable(struct drm_bridge *bridge);
> +int drm_bridge_set_bus_formats(struct drm_bridge *bridge, const u32 *fmts,
> + unsigned int num_fmts);
>
> #ifdef CONFIG_DRM_PANEL_BRIDGE
> struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-04-23 9:27 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-19 9:31 [PATCH 0/8] drm: bridge: Add support for static image formats Jacopo Mondi
2018-04-19 9:31 ` [PATCH 1/8] " Jacopo Mondi
2018-04-22 20:02 ` Peter Rosin
2018-04-26 18:44 ` jacopo mondi
2018-04-23 9:27 ` Laurent Pinchart [this message]
2018-04-26 18:40 ` jacopo mondi
2018-04-26 19:57 ` Laurent Pinchart
2018-04-19 9:31 ` [PATCH 2/8] dt-bindings: display: bridge: thc63lvd1024: Add lvds map property Jacopo Mondi
2018-04-22 20:02 ` Peter Rosin
2018-04-23 7:35 ` jacopo mondi
2018-04-23 11:59 ` Laurent Pinchart
2018-04-23 12:02 ` Laurent Pinchart
2018-04-24 16:37 ` Rob Herring
2018-04-19 9:31 ` [PATCH 3/8] drm: bridge: thc63lvd1024: Add support for LVDS mode map Jacopo Mondi
2018-04-22 20:02 ` Peter Rosin
2018-04-23 7:41 ` jacopo mondi
2018-04-23 12:12 ` Laurent Pinchart
2018-04-23 12:08 ` Laurent Pinchart
2018-04-19 9:31 ` [PATCH 4/8] arm64: dts: renesas: eagle: Add thc63 LVDS map Jacopo Mondi
2018-04-23 10:29 ` Simon Horman
2018-04-23 13:07 ` Laurent Pinchart
2018-04-19 9:31 ` [PATCH 5/8] media: Add LE version of RGB LVDS formats Jacopo Mondi
2018-04-23 13:06 ` Laurent Pinchart
2018-04-24 7:16 ` jacopo mondi
2018-04-19 9:31 ` [PATCH 6/8] drm: rcar-du: rcar-lvds: Add bridge format support Jacopo Mondi
2018-04-22 20:08 ` Peter Rosin
2018-04-23 7:28 ` jacopo mondi
2018-04-23 7:59 ` Peter Rosin
2018-04-23 8:47 ` jacopo mondi
2018-04-23 12:59 ` Laurent Pinchart
2018-04-19 9:31 ` [PATCH 7/8] drm: panel: Use _LE LVDS formats for data mirroring Jacopo Mondi
2018-04-19 9:31 ` [PATCH 8/8] drm: connector: Remove DRM_BUS_FLAG_DATA_* flags Jacopo Mondi
2018-04-23 21:03 ` Laurent Pinchart
2018-04-24 7:22 ` jacopo mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3108314.q4SV6s3NXE@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jacopo+renesas@jmondi.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=peda@axentia.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).