Re: [PATCH 4/7] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 22/04/2022 20:30, Jonathan Neuschäfer wrote:
> The Nuvoton WPCM450 SoC has a combined clock and reset controller.
> Add a devicetree binding for it, as well as definitions for the bit
> numbers used by it.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> ---

Thank you for your patch. There is something to discuss/improve.

>  .../bindings/clock/nuvoton,wpcm450-clk.yaml   | 74 +++++++++++++++++++
>  .../dt-bindings/clock/nuvoton,wpcm450-clk.h   | 67 +++++++++++++++++
>  2 files changed, 141 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
>  create mode 100644 include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
> new file mode 100644
> index 0000000000000..0fffa8a68dee4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/nuvoton,wpcm450-clk.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton WPCM450 clock controller binding

s/binding//

> +
> +maintainers:
> +  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> +
> +description:
> +  This binding describes the clock controller of the Nuvoton WPCM450 SoC, which
> +  supplies clocks and resets to the rest of the chip.

s/This binding describes//

Just describe the hardware.

> +
> +properties:
> +  compatible:
> +    const: nuvoton,wpcm450-clk
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Reference clock oscillator (should be 48 MHz)
> +
> +  clock-names:
> +    items:
> +      - const: refclk
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  '#reset-cells':
> +    const: 1
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    refclk: clock-48mhz {
> +      /* 48 MHz reference oscillator */
> +      compatible = "fixed-clock";
> +      clock-output-names = "refclk";
> +      clock-frequency = <48000000>;
> +      #clock-cells = <0>;
> +    };
> +
> +    clk: clock-controller@b0000200 {
> +      reg = <0xb0000200 0x100>;
> +      compatible = "nuvoton,wpcm450-clk";
> +      clocks = <&refclk>;
> +      clock-names = "refclk";
> +      #clock-cells = <1>;
> +      #reset-cells = <1>;
> +    };
> +
> +    serial@b8000000 {
> +      compatible = "nuvoton,wpcm450-uart";
> +      reg = <0xb8000000 0x20>;
> +      reg-shift = <2>;
> +      interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&clk WPCM450_CLK_UART0>;
> +    };

Skip the consumer example, it's obvious/trivial/duplicating.

> diff --git a/include/dt-bindings/clock/nuvoton,wpcm450-clk.h b/include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> new file mode 100644
> index 0000000000000..86e1c895921b7
> --- /dev/null
> +++ b/include/dt-bindings/clock/nuvoton,wpcm450-clk.h
> @@ -0,0 +1,67 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +
> +#ifndef _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H
> +#define _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H
> +
> +/* Clocks based on CLKEN bits */
> +#define WPCM450_CLK_FIU            0
> +#define WPCM450_CLK_XBUS           1
> +#define WPCM450_CLK_KCS            2
> +#define WPCM450_CLK_SHM            4
> +#define WPCM450_CLK_USB1           5
> +#define WPCM450_CLK_EMC0           6
> +#define WPCM450_CLK_EMC1           7
> +#define WPCM450_CLK_USB0           8
> +#define WPCM450_CLK_PECI           9
> +#define WPCM450_CLK_AES           10
> +#define WPCM450_CLK_UART0         11
> +#define WPCM450_CLK_UART1         12
> +#define WPCM450_CLK_SMB2          13
> +#define WPCM450_CLK_SMB3          14
> +#define WPCM450_CLK_SMB4          15
> +#define WPCM450_CLK_SMB5          16
> +#define WPCM450_CLK_HUART         17
> +#define WPCM450_CLK_PWM           18
> +#define WPCM450_CLK_TIMER0        19
> +#define WPCM450_CLK_TIMER1        20
> +#define WPCM450_CLK_TIMER2        21
> +#define WPCM450_CLK_TIMER3        22
> +#define WPCM450_CLK_TIMER4        23
> +#define WPCM450_CLK_MFT0          24
> +#define WPCM450_CLK_MFT1          25
> +#define WPCM450_CLK_WDT           26
> +#define WPCM450_CLK_ADC           27
> +#define WPCM450_CLK_SDIO          28
> +#define WPCM450_CLK_SSPI          29
> +#define WPCM450_CLK_SMB0          30
> +#define WPCM450_CLK_SMB1          31
> +
> +/* Other clocks */
> +#define WPCM450_CLK_USBPHY        32
> +
> +#define WPCM450_NUM_CLKS          33
> +
> +/* Resets based on IPSRST bits */

All these defines should be in second header in dt-bindings/reset/...

> +#define WPCM450_RESET_FIU          0


Best regards,
Krzysztof