* [PATCH v2 1/2] dt-bindings: arm: rockchip: Add rk3399 industry evaluation board
2025-04-30 7:48 [PATCH v2 0/2] Add support for rk3399 industry evaluation board Chaoyi Chen
@ 2025-04-30 7:48 ` Chaoyi Chen
2025-04-30 14:36 ` Rob Herring (Arm)
2025-04-30 7:48 ` [PATCH v2 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board Chaoyi Chen
2025-04-30 20:56 ` [PATCH v2 0/2] Add support for rk3399 industry evaluation board Rob Herring (Arm)
2 siblings, 1 reply; 8+ messages in thread
From: Chaoyi Chen @ 2025-04-30 7:48 UTC (permalink / raw)
To: Heiko Stuebner
Cc: Andrew Lunn, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Jonas Karlman, Kever Yang, Jianfeng Liu, Dragan Simic, Jimmy Hon,
Quentin Schulz, FUKAUMI Naoki, Cristian Ciocaltea, Alexey Charkov,
Geert Uytterhoeven, Sebastian Reichel, Chaoyi Chen, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Add devicetree binding for the rk3399 industry evaluation board.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
---
(no changes since v1)
Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 650fb833d96e..684d48ba20fc 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -1047,6 +1047,11 @@ properties:
- const: rockchip,rk3399-evb
- const: rockchip,rk3399
+ - description: Rockchip RK3399 Industry Evaluation board
+ items:
+ - const: rockchip,rk3399-evb-ind
+ - const: rockchip,rk3399
+
- description: Rockchip RK3399 Sapphire standalone
items:
- const: rockchip,rk3399-sapphire
--
2.49.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v2 1/2] dt-bindings: arm: rockchip: Add rk3399 industry evaluation board
2025-04-30 7:48 ` [PATCH v2 1/2] dt-bindings: arm: rockchip: Add " Chaoyi Chen
@ 2025-04-30 14:36 ` Rob Herring (Arm)
2025-04-30 14:48 ` Quentin Schulz
0 siblings, 1 reply; 8+ messages in thread
From: Rob Herring (Arm) @ 2025-04-30 14:36 UTC (permalink / raw)
To: Chaoyi Chen
Cc: Quentin Schulz, FUKAUMI Naoki, linux-rockchip, Conor Dooley,
linux-kernel, Heiko Stuebner, Dragan Simic, Cristian Ciocaltea,
devicetree, Kever Yang, Krzysztof Kozlowski, linux-arm-kernel,
Jonas Karlman, Andrew Lunn, Geert Uytterhoeven, Sebastian Reichel,
Jianfeng Liu, Alexey Charkov, Chaoyi Chen, Jimmy Hon
On Wed, 30 Apr 2025 15:48:47 +0800, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>
> Add devicetree binding for the rk3399 industry evaluation board.
>
> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> ---
>
> (no changes since v1)
>
> Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.
If a tag was not added on purpose, please state why and what changed.
Missing tags:
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: rockchip: Add rk3399 industry evaluation board
2025-04-30 14:36 ` Rob Herring (Arm)
@ 2025-04-30 14:48 ` Quentin Schulz
2025-05-02 1:30 ` Rob Herring
0 siblings, 1 reply; 8+ messages in thread
From: Quentin Schulz @ 2025-04-30 14:48 UTC (permalink / raw)
To: Rob Herring (Arm), Chaoyi Chen
Cc: FUKAUMI Naoki, linux-rockchip, Conor Dooley, linux-kernel,
Heiko Stuebner, Dragan Simic, Cristian Ciocaltea, devicetree,
Kever Yang, Krzysztof Kozlowski, linux-arm-kernel, Jonas Karlman,
Andrew Lunn, Geert Uytterhoeven, Sebastian Reichel, Jianfeng Liu,
Alexey Charkov, Chaoyi Chen, Jimmy Hon
Hi Rob,
On 4/30/25 4:36 PM, Rob Herring (Arm) wrote:
>
> On Wed, 30 Apr 2025 15:48:47 +0800, Chaoyi Chen wrote:
>> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>>
>> Add devicetree binding for the rk3399 industry evaluation board.
>>
>> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>> ---
>>
>> (no changes since v1)
>>
>> Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>
>
> Please add Acked-by/Reviewed-by tags when posting new versions. However,
> there's no need to repost patches *only* to add the tags. The upstream
> maintainer will do that for acks received on the version they apply.
>
> If a tag was not added on purpose, please state why and what changed.
>
> Missing tags:
>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
To be fair, the Acked-by was given on the v1[1] after the v2[2] was
sent, we cannot expect Chaoyi Chen to travel back in time :)
[1]
https://lore.kernel.org/linux-rockchip/20250430-light-chital-of-cookies-b8f2ab@kuoka/
10:22 UTC
[2]
https://lore.kernel.org/linux-rockchip/20250430074848.539-2-kernel@airkyi.com/
7:48 UTC
Cheers,
Quentin
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm: rockchip: Add rk3399 industry evaluation board
2025-04-30 14:48 ` Quentin Schulz
@ 2025-05-02 1:30 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2025-05-02 1:30 UTC (permalink / raw)
To: Quentin Schulz
Cc: Chaoyi Chen, FUKAUMI Naoki, linux-rockchip, Conor Dooley,
linux-kernel, Heiko Stuebner, Dragan Simic, Cristian Ciocaltea,
devicetree, Kever Yang, Krzysztof Kozlowski, linux-arm-kernel,
Jonas Karlman, Andrew Lunn, Geert Uytterhoeven, Sebastian Reichel,
Jianfeng Liu, Alexey Charkov, Chaoyi Chen, Jimmy Hon
On Wed, Apr 30, 2025 at 04:48:35PM +0200, Quentin Schulz wrote:
> Hi Rob,
>
> On 4/30/25 4:36 PM, Rob Herring (Arm) wrote:
> >
> > On Wed, 30 Apr 2025 15:48:47 +0800, Chaoyi Chen wrote:
> > > From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> > >
> > > Add devicetree binding for the rk3399 industry evaluation board.
> > >
> > > Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> > > ---
> > >
> > > (no changes since v1)
> > >
> > > Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
> > > 1 file changed, 5 insertions(+)
> > >
> >
> >
> > Please add Acked-by/Reviewed-by tags when posting new versions. However,
> > there's no need to repost patches *only* to add the tags. The upstream
> > maintainer will do that for acks received on the version they apply.
> >
> > If a tag was not added on purpose, please state why and what changed.
> >
> > Missing tags:
> >
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >
>
> To be fair, the Acked-by was given on the v1[1] after the v2[2] was sent, we
> cannot expect Chaoyi Chen to travel back in time :)
Usually a sign of sending new versions too quickly...
But I just send this semi-automated email so we capture the ack and I
can clear it out of my inbox.
Rob
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
2025-04-30 7:48 [PATCH v2 0/2] Add support for rk3399 industry evaluation board Chaoyi Chen
2025-04-30 7:48 ` [PATCH v2 1/2] dt-bindings: arm: rockchip: Add " Chaoyi Chen
@ 2025-04-30 7:48 ` Chaoyi Chen
2025-04-30 8:39 ` Quentin Schulz
2025-04-30 20:56 ` [PATCH v2 0/2] Add support for rk3399 industry evaluation board Rob Herring (Arm)
2 siblings, 1 reply; 8+ messages in thread
From: Chaoyi Chen @ 2025-04-30 7:48 UTC (permalink / raw)
To: Heiko Stuebner
Cc: Andrew Lunn, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Jonas Karlman, Kever Yang, Jianfeng Liu, Dragan Simic, Jimmy Hon,
Quentin Schulz, FUKAUMI Naoki, Cristian Ciocaltea, Alexey Charkov,
Geert Uytterhoeven, Sebastian Reichel, Chaoyi Chen, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
General feature for rk3399 industry evaluation board:
- Rockchip RK3399
- 4GB LPDDR4
- emmc5.1
- SDIO3.0 compatible TF card
- 1x HDMI2.0a TX
- 1x HDMI1.4b RX with TC358749XBG HDMI to MIPI CSI2 bridge chip
- 1x type-c DisplayPort
- 3x USB3.0 Host
- 1x USB2.0 Host
- 1x Ethernet / USB3.0 to Ethernet
Tested with HDMI/GPU/USB2.0/USB3.0/TF card/emmc.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
---
Changes in v2:
- Remove gmac
- Add rk809 PMIC
- Add CPU supply
- Fix io-domain for sdmmc
- Enable vopl
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399-evb-ind.dts | 466 ++++++++++++++++++
2 files changed, 467 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 3e8771ef69ba..8a3adb7482ca 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
new file mode 100644
index 000000000000..ebfe7e56b3f5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-base.dtsi"
+
+/ {
+ model = "Rockchip RK3399 EVB IND LPDDR4 Board";
+ compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <4>;
+ i2c-scl-rising-time-ns = <168>;
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ #clock-cells = <1>;
+ pmic-reset-func = <0>;
+ wakeup-source;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <750000>;
+ regulator-ramp-delay = <6001>;
+ regulator-name = "vdd_center";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <750000>;
+ regulator-ramp-delay = <6001>;
+ regulator-name = "vdd_cpu_l";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_sys";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2200000>;
+ regulator-min-microvolt = <2200000>;
+ regulator-name = "vcc_buck5";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcca_0v9: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <900000>;
+ regulator-min-microvolt = <900000>;
+ regulator-name = "vcca_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc0v9_soc: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <900000>;
+ regulator-min-microvolt = <900000>;
+ regulator-name = "vcc0v9_soc";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcca_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd1v5_dvp: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1500000>;
+ regulator-min-microvolt = <1500000>;
+ regulator-name = "vdd1v5_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1500000>;
+ regulator-min-microvolt = <1500000>;
+ regulator-name = "vcc_1v5";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc_3v0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_sd: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc5v0_usb: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc5v0_usb";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vccio_3v3: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vccio_3v3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: tcs4525@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ fcs,suspend-voltage-selector = <1>;
+ vin-supply = <&vcc5v0_sys>;
+ vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-compatible = "fan53555-reg";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-state = <3>;
+ regulator-max-microvolt = <1500000>;
+ regulator-min-microvolt = <712500>;
+ regulator-name = "vdd_cpu_b";
+ regulator-ramp-delay = <1000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: tcs4526@10 {
+ compatible = "tcs,tcs4525";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ fcs,suspend-voltage-selector = <1>;
+ vin-supply = <&vcc5v0_sys>;
+ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ regulator-compatible = "fan53555-reg";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-state = <3>;
+ regulator-max-microvolt = <1500000>;
+ regulator-min-microvolt = <712500>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <1000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&io_domains {
+ audio-supply = <&vcca_1v8>;
+ bt656-supply = <&vcc_3v0>;
+ gpio1830-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ no-sdio;
+ no-mmc;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ keep-power-in-suspend;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_host {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_host {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--
2.49.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v2 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board
2025-04-30 7:48 ` [PATCH v2 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board Chaoyi Chen
@ 2025-04-30 8:39 ` Quentin Schulz
0 siblings, 0 replies; 8+ messages in thread
From: Quentin Schulz @ 2025-04-30 8:39 UTC (permalink / raw)
To: Chaoyi Chen, Heiko Stuebner
Cc: Andrew Lunn, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Jonas Karlman, Kever Yang, Jianfeng Liu, Dragan Simic, Jimmy Hon,
FUKAUMI Naoki, Cristian Ciocaltea, Alexey Charkov,
Geert Uytterhoeven, Sebastian Reichel, Chaoyi Chen, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
Hi Chaoyi Chen,
On 4/30/25 9:48 AM, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>
> General feature for rk3399 industry evaluation board:
> - Rockchip RK3399
Quick question, is this really an RK3399 or rather an RK3399K (the
industrial grade)? If it's a K variant, then we need a new rk3399-k.dtsi
with the appropriate OPPs and include that instead.
> - 4GB LPDDR4
> - emmc5.1
> - SDIO3.0 compatible TF card
> - 1x HDMI2.0a TX
> - 1x HDMI1.4b RX with TC358749XBG HDMI to MIPI CSI2 bridge chip
> - 1x type-c DisplayPort
> - 3x USB3.0 Host
> - 1x USB2.0 Host
> - 1x Ethernet / USB3.0 to Ethernet
>
> Tested with HDMI/GPU/USB2.0/USB3.0/TF card/emmc.
>
> Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
> ---
>
> Changes in v2:
> - Remove gmac
> - Add rk809 PMIC
> - Add CPU supply
> - Fix io-domain for sdmmc
> - Enable vopl
>
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399-evb-ind.dts | 466 ++++++++++++++++++
> 2 files changed, 467 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 3e8771ef69ba..8a3adb7482ca 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
> new file mode 100644
> index 000000000000..ebfe7e56b3f5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
> @@ -0,0 +1,466 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399-base.dtsi"
> +
You're supposed to include one device tree include with OPPs. I see that
the rk3399-evb is the only one that does that.
According to 296602b8e5f7 ("arm64: dts: rockchip: Move RK3399 OPPs to
dtsi files for SoC variants"), this was done because:
The only exception to the "include only a SoC variant dtsi" is found in
rk3399-evb.dts, which includes rk3399-base.dtsi instead of rk3399.dtsi.
This is intentional, because this board dts file doesn't enable the
TSADC,
so including rk3399.dtsi would enable the SoC to go into higher
OPPs with
no thermal throttling in place. Let's hope that people interested
in this
board will fix this in the future.
Soooo, maybe you could fix that now? At the very least for the
industrial variant (but it would also be most welcomed for the "normal"
EVB).
> +/ {
> + model = "Rockchip RK3399 EVB IND LPDDR4 Board";
> + compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
> +
> + aliases {
> + ethernet0 = &gmac;
Considering gmac is gone from the DT, maybe you want to have that one in
the patch that will add Ethernet support?
> + mmc0 = &sdhci;
> + mmc1 = &sdmmc;
> + };
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + vcc5v0_sys: regulator-vcc5v0-sys {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <5000000>;
> + regulator-min-microvolt = <5000000>;
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
Please order the nodes alphabetically, so cpu_bX before cpu_lX. See
https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
> + status = "okay";
> +};
> +
> +&hdmi_sound {
> + status = "okay";
> +};
> +
hdmi_sound requires i2s2 controller to be enabled too, but I don't see
it in this device tree?
> +&i2c0 {
> + clock-frequency = <400000>;
> + i2c-scl-falling-time-ns = <4>;
> + i2c-scl-rising-time-ns = <168>;
> + status = "okay";
> +
> + rk809: pmic@20 {
> + compatible = "rockchip,rk809";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + #clock-cells = <1>;
> + pmic-reset-func = <0>;
> + wakeup-source;
> + clock-output-names = "xin32k", "rk808-clkout2";
> +
Please order properties correctly, see
https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc5-supply = <&vcc_buck5>;
> + vcc6-supply = <&vcc_buck5>;
> + vcc7-supply = <&vcc5v0_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-mode = <0x2>;
> + regulator-max-microvolt = <1350000>;
> + regulator-min-microvolt = <750000>;
> + regulator-ramp-delay = <6001>;
> + regulator-name = "vdd_center";
Missing blank line between last property and first child node, see
https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html.
Same remark for all other regulators.
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-mode = <0x2>;
> + regulator-max-microvolt = <1350000>;
> + regulator-min-microvolt = <750000>;
> + regulator-ramp-delay = <6001>;
> + regulator-name = "vdd_cpu_l";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vcc_ddr";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc3v3_sys: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-mode = <0x2>;
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "vcc3v3_sys";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_buck5: DCDC_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <2200000>;
> + regulator-min-microvolt = <2200000>;
> + regulator-name = "vcc_buck5";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <2200000>;
> + };
> + };
> +
> + vcca_0v9: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <900000>;
> + regulator-min-microvolt = <900000>;
> + regulator-name = "vcca_0v9";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <1800000>;
> + regulator-name = "vcc_1v8";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc0v9_soc: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <900000>;
> + regulator-min-microvolt = <900000>;
> + regulator-name = "vcc0v9_soc";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vcca_1v8: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <1800000>;
> + regulator-name = "vcca_1v8";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd1v5_dvp: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1500000>;
> + regulator-min-microvolt = <1500000>;
> + regulator-name = "vdd1v5_dvp";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <1500000>;
> + regulator-min-microvolt = <1500000>;
> + regulator-name = "vcc_1v5";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <3000000>;
> + regulator-min-microvolt = <3000000>;
> + regulator-name = "vcc_3v0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <1800000>;
> + regulator-name = "vccio_sd";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_sd: LDO_REG9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc5v0_usb: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc5v0_usb";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vccio_3v3: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vccio_3v3";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: tcs4525@1c {
Please set the node name to regulator@1c.
> + compatible = "tcs,tcs4525";
> + reg = <0x1c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vsel1_gpio>;
> + fcs,suspend-voltage-selector = <1>;
> + vin-supply = <&vcc5v0_sys>;
> + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
> + regulator-compatible = "fan53555-reg";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-state = <3>;
> + regulator-max-microvolt = <1500000>;
> + regulator-min-microvolt = <712500>;
> + regulator-name = "vdd_cpu_b";
> + regulator-ramp-delay = <1000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
Properties order and blank line before child node, see
https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html
> + };
> +
> + vdd_gpu: tcs4526@10 {
Please set node name to regulator@10.
Please order child nodes in busses based on their address, i.e.:
vdd_gpu
vdd_cpu_b
rk809
in this case.
> + compatible = "tcs,tcs4525";
> + reg = <0x10>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vsel2_gpio>;
> + fcs,suspend-voltage-selector = <1>;
> + vin-supply = <&vcc5v0_sys>;
> + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> + regulator-compatible = "fan53555-reg";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-state = <3>;
> + regulator-max-microvolt = <1500000>;
> + regulator-min-microvolt = <712500>;
> + regulator-name = "vdd_gpu";
> + regulator-ramp-delay = <1000>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
Properties order and blank line before child node, see
https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html
> + };
> +};
> +
> +&io_domains {
> + audio-supply = <&vcca_1v8>;
> + bt656-supply = <&vcc_3v0>;
> + gpio1830-supply = <&vcc_3v0>;
> + sdmmc-supply = <&vccio_sd>;
> + status = "okay";
> +};
What about pmu_io_domains too?
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + disable-wp;
> + no-sdio;
> + no-mmc;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> + sd-uhs-sdr104;
> + vmmc-supply = <&vcc_sd>;
> + vqmmc-supply = <&vccio_sd>;
> + status = "okay";
> +};
> +
> +&sdhci {
This should be before sdmmc
> + bus-width = <8>;
> + keep-power-in-suspend;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + no-sdio;
> + no-sd;
> + non-removable;
> + status = "okay";
> +};
> +
> +&tcphy0 {
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
What about tsadc?
> +&u2phy0 {
> + status = "okay";
> +};
> +
> +&u2phy0_host {
> + status = "okay";
> +};
> +
> +&u2phy0_otg {
> + status = "okay";
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +};
> +
> +&u2phy1_host {
> + status = "okay";
> +};
> +
> +&u2phy1_otg {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&pinctrl {
This needs to be ordered alphabetically, see
https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html
(so before sdhci here).
Cheers,
Quentin
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 0/2] Add support for rk3399 industry evaluation board
2025-04-30 7:48 [PATCH v2 0/2] Add support for rk3399 industry evaluation board Chaoyi Chen
2025-04-30 7:48 ` [PATCH v2 1/2] dt-bindings: arm: rockchip: Add " Chaoyi Chen
2025-04-30 7:48 ` [PATCH v2 2/2] arm64: dts: rockchip: Add rk3399-evb-ind board Chaoyi Chen
@ 2025-04-30 20:56 ` Rob Herring (Arm)
2 siblings, 0 replies; 8+ messages in thread
From: Rob Herring (Arm) @ 2025-04-30 20:56 UTC (permalink / raw)
To: Chaoyi Chen
Cc: linux-arm-kernel, Cristian Ciocaltea, FUKAUMI Naoki,
Geert Uytterhoeven, Sebastian Reichel, Alexey Charkov,
linux-kernel, Heiko Stuebner, Kever Yang, Chaoyi Chen,
Dragan Simic, linux-rockchip, Jimmy Hon, Quentin Schulz,
Jianfeng Liu, Jonas Karlman, devicetree, Conor Dooley,
Krzysztof Kozlowski, Andrew Lunn
On Wed, 30 Apr 2025 15:48:46 +0800, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>
> General feature for rk3399 industry evaluation board:
> - Rockchip RK3399
> - 4GB LPDDR4
> - emmc5.1
> - SDIO3.0 compatible TF card
> - 1x HDMI2.0a TX
> - 1x HDMI1.4b RX with TC358749XBG HDMI to MIPI CSI2 bridge chip
> - 1x type-c DisplayPort
> - 3x USB3.0 Host
> - 1x USB2.0 Host
> - 1x Ethernet / USB3.0 to Ethernet
>
> Tested with HDMI/GPU/USB2.0/USB3.0/TF card/emmc.
>
> Changes in v2:
> - Link to V1: https://lore.kernel.org/all/20250427094211.246-1-kernel@airkyi.com/
> - Remove gmac
> - Add rk809 PMIC
> - Add CPU supply
> - Fix io-domain for sdmmc
> - Enable vopl
>
> Chaoyi Chen (2):
> dt-bindings: arm: rockchip: Add rk3399 industry evaluation board
> arm64: dts: rockchip: Add rk3399-evb-ind board
>
> .../devicetree/bindings/arm/rockchip.yaml | 5 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399-evb-ind.dts | 466 ++++++++++++++++++
> 3 files changed, 472 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
>
> --
> 2.49.0
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/v6.15-rc1-23-g0d0947766d87 (exact match)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/rockchip/' for 20250430074848.539-1-kernel@airkyi.com:
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: /dp@fec00000: failed to match any schema with compatible: ['rockchip,rk3399-cdn-dp']
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: pmic@20 (rockchip,rk809): 'pmic-reset-func' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: tcs4525@1c (tcs,tcs4525): Unevaluated properties are not allowed ('regulator-compatible', 'regulator-initial-state' were unexpected)
from schema $id: http://devicetree.org/schemas/regulator/fcs,fan53555.yaml#
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: tcs4526@10 (tcs,tcs4525): Unevaluated properties are not allowed ('regulator-compatible', 'regulator-initial-state' were unexpected)
from schema $id: http://devicetree.org/schemas/regulator/fcs,fan53555.yaml#
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: /syscon@ff770000/pcie-phy: failed to match any schema with compatible: ['rockchip,rk3399-pcie-phy']
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: /phy@ff7c0000: failed to match any schema with compatible: ['rockchip,rk3399-typec-phy']
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: /phy@ff800000: failed to match any schema with compatible: ['rockchip,rk3399-typec-phy']
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: pmic: vsel1-gpio: {'rockchip,pins': [[1, 17, 0, 169]], 'phandle': 117} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dtb: pmic: vsel2-gpio: {'rockchip,pins': [[1, 14, 0, 169]], 'phandle': 118} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
^ permalink raw reply [flat|nested] 8+ messages in thread