Re: [PATCH v2 5/6] can: tcan4x5x: Add support for tcan4552/4553

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 21/06/2023 11:31, Markus Schneider-Pargmann wrote:
> tcan4552 and tcan4553 do not have wake or state pins, so they are
> currently not compatible with the generic driver. The generic driver
> uses tcan4x5x_disable_state() and tcan4x5x_disable_wake() if the gpios
> are not defined. These functions use register bits that are not
> available in tcan4552/4553.
> 
> This patch adds support by introducing version information to reflect if
> the chip has wake and state pins. Also the version is now checked.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> ---
>  drivers/net/can/m_can/tcan4x5x-core.c | 128 +++++++++++++++++++++-----
>  1 file changed, 104 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
> index fb9375fa20ec..756acd122075 100644
> --- a/drivers/net/can/m_can/tcan4x5x-core.c
> +++ b/drivers/net/can/m_can/tcan4x5x-core.c
> @@ -7,6 +7,7 @@
>  #define TCAN4X5X_EXT_CLK_DEF 40000000
>  
>  #define TCAN4X5X_DEV_ID1 0x00
> +#define TCAN4X5X_DEV_ID1_TCAN 0x4e414354 /* ASCII TCAN */
>  #define TCAN4X5X_DEV_ID2 0x04
>  #define TCAN4X5X_REV 0x08
>  #define TCAN4X5X_STATUS 0x0C
> @@ -103,6 +104,13 @@
>  #define TCAN4X5X_WD_3_S_TIMER BIT(29)
>  #define TCAN4X5X_WD_6_S_TIMER (BIT(28) | BIT(29))
>  
> +struct tcan4x5x_version_info {
> +	u32 id2_register;
> +
> +	bool has_wake_pin;
> +	bool has_state_pin;
> +};
> +
>  static inline struct tcan4x5x_priv *cdev_to_priv(struct m_can_classdev *cdev)
>  {
>  	return container_of(cdev, struct tcan4x5x_priv, cdev);
> @@ -254,18 +262,68 @@ static int tcan4x5x_disable_state(struct m_can_classdev *cdev)
>  				  TCAN4X5X_DISABLE_INH_MSK, 0x01);
>  }
>  
> -static int tcan4x5x_get_gpios(struct m_can_classdev *cdev)
> +static const struct tcan4x5x_version_info tcan4x5x_generic;
> +static const struct of_device_id tcan4x5x_of_match[];
> +
> +static const struct tcan4x5x_version_info
> +*tcan4x5x_find_version_info(struct tcan4x5x_priv *priv, u32 id2_value)
> +{
> +	for (int i = 0; tcan4x5x_of_match[i].data; ++i) {
> +		const struct tcan4x5x_version_info *vinfo =
> +			tcan4x5x_of_match[i].data;
> +		if (!vinfo->id2_register || id2_value == vinfo->id2_register) {
> +			dev_warn(&priv->spi->dev, "TCAN device is %s, please use it in DT\n",
> +				 tcan4x5x_of_match[i].compatible);
> +			return vinfo;
> +		}
> +	}
> +
> +	return &tcan4x5x_generic;

I don't understand what do you want to achieve here. Kernel job is not
to validate DTB, so if DTB says you have 4552, there is no need to
double check. On the other hand, you have Id register so entire idea of
custom compatibles can be dropped and instead you should detect the
variant based on the ID.

Best regards,
Krzysztof