From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnd Bergmann Subject: Re: [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3. Date: Mon, 06 Jun 2016 09:28:55 +0200 Message-ID: <3265668.gGTUMSyXWi@wuerfel> References: <1464934708-24769-1-git-send-email-kraxel@redhat.com> <1465197612.24775.190.camel@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <1465197612.24775.190.camel@redhat.com> Sender: linux-kernel-owner@vger.kernel.org To: Gerd Hoffmann Cc: Rob Herring , "linux-arm-kernel@lists.infradead.org" , linux-rpi-kernel@lists.infradead.org, Mark Rutland , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , Florian Fainelli , Catalin Marinas , Scott Branden , Pawel Moll , Ian Campbell , Ray Jui , Will Deacon , Russell King , open list , Eric Anholt , "open list:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE..." , Kumar Gala List-Id: devicetree@vger.kernel.org On Monday, June 6, 2016 9:20:12 AM CEST Gerd Hoffmann wrote: > On Fr, 2016-06-03 at 11:17 -0500, Rob Herring wrote: > > On Fri, Jun 3, 2016 at 5:39 AM, Gerd Hoffmann wrote: > > > Hi, > > > > > >> I tried > > >> > > >> subdir-y += ../../../arm64/boot/dts/broadcom > > > > > > Hmm, works for me too now, probably had a typo somewhere. > > > > What directory does the dtb end up in? Because as it was, it ended up > > in arch/arm64/boot/dts/broadcom. I'm not sure all this hackery is > > worth it if the dtb doesn't end up in arch/arm/boot/dts/. > > With the 2/7 patch at the start of this subthread the dtb ends up in > arch/arm64/boot/dts/broadcom for both arm and arm64 builds. > > make "dtbs_install" places it in /boot/dtbs/$version/ for arm builds and > in /boot/dtbs/$version/broadcom/ for arm64 builds. Ok, let's stay with that for now then, and solve it better when we need to do more of the same. Are you aware of any other boards using bcm2837? Arnd