devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Qin Jian <qinjian@cqplus1.com>, sboyd@kernel.org
Cc: robh+dt@kernel.org, mturquette@baylibre.com, tglx@linutronix.de,
	maz@kernel.org, p.zabel@pengutronix.de, linux@armlinux.org.uk,
	arnd@arndb.de, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org
Subject: Re: [PATCH v15 10/10] ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
Date: Thu, 12 May 2022 12:28:00 +0200	[thread overview]
Message-ID: <32c80a79-abd5-3fd2-cbb4-e2ae93c539da@linaro.org> (raw)
In-Reply-To: <daeccdfb9655e549656af0af955a4697871e3ab0.1652329411.git.qinjian@cqplus1.com>

On 12/05/2022 08:31, Qin Jian wrote:
> Add the basic support for Sunplus SP7021-Demo-V3 board.
> 
> Signed-off-by: Qin Jian <qinjian@cqplus1.com>
> ---
>  MAINTAINERS                                  |   1 +
>  arch/arm/boot/dts/sunplus-sp7021-achip.dtsi  |  85 +++++
>  arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts |  27 ++
>  arch/arm/boot/dts/sunplus-sp7021.dtsi        | 369 +++++++++++++++++++
>  4 files changed, 482 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
>  create mode 100644 arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
>  create mode 100644 arch/arm/boot/dts/sunplus-sp7021.dtsi
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9cf30e776..b55ec0768 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2747,6 +2747,7 @@ F:	Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
>  F:	Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
>  F:	Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
>  F:	Documentation/devicetree/bindings/reset/sunplus,reset.yaml
> +F:	arch/arm/boot/dts/sunplus-sp7021*.dts*
>  F:	arch/arm/configs/sp7021_*defconfig
>  F:	arch/arm/mach-sunplus/
>  F:	drivers/clk/clk-sp7021.c
> diff --git a/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
> new file mode 100644
> index 000000000..1560c95d9
> --- /dev/null
> +++ b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
> @@ -0,0 +1,85 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for Sunplus SP7021
> + *
> + * Copyright (C) 2021 Sunplus Technology Co.
> + */
> +
> +#include "sunplus-sp7021.dtsi"
> +
> +/ {
> +	compatible = "sunplus,sp7021-achip";

This does not match your bindings.

> +	model = "Sunplus SP7021 (CA7)";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	interrupt-parent = <&gic>;
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		extclk: clk@osc0 {

This is not a valid device tree. Please run make dtbs_check and compile
dtbs with W=1.

> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <27000000>;
> +			clock-output-names = "extclk";
> +		};
> +
> +		divextclk: clk@0 {

How is it suppose to pass any automated checks if there is no unit address?

> +			compatible = "fixed-factor-clock";
> +			#clock-cells = <0>;
> +			clocks  = <&extclk>;
> +			clock-mult = <1>;
> +			clock-div = <2>;
> +			clock-output-names = "extdivclk";
> +		};
> +
> +		A_pll0: clk@A_pll0 {

This is not a valid device tree.

> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <2000000000>;
> +			clock-output-names = "A_pll0";
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			compatible = "arm,cortex-a7";
> +			device_type = "cpu";
> +			reg = <0>;
> +			clock-frequency = <931000000>;
> +		};
> +		cpu1: cpu@1 {
> +			compatible = "arm,cortex-a7";
> +			device_type = "cpu";
> +			reg = <1>;
> +			clock-frequency = <931000000>;
> +		};
> +		cpu2: cpu@2 {
> +			compatible = "arm,cortex-a7";
> +			device_type = "cpu";
> +			reg = <2>;
> +			clock-frequency = <931000000>;
> +		};
> +		cpu3: cpu@3 {
> +			compatible = "arm,cortex-a7";
> +			device_type = "cpu";
> +			reg = <3>;
> +			clock-frequency = <931000000>;
> +		};
> +	};
> +
> +	arm-pmu {
> +		compatible = "arm,cortex-a7-pmu";
> +		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> +	};
> +
> +};
> diff --git a/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
> new file mode 100644
> index 000000000..05e164115
> --- /dev/null
> +++ b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for Sunplus SP7021 Demo V3 SBC board
> + *
> + * Copyright (C) Sunplus Technology Co.
> + */
> +
> +/dts-v1/;
> +
> +#include "sunplus-sp7021-achip.dtsi"
> +
> +/ {
> +	compatible = "sunplus,sp7021-demo-v3";

This does not match your bindings.

Please run make dtbs_check.

> +	model = "SP7021/CA7/Demo_V3";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200 loglevel=8 earlycon";

No bootargs.

I'll stop reviewing. This either does not compile, does not work or does
not pass automated checks. There is no point to use reviewers time if
the tools are doing the same job, so use the tools and then submit DTS.

Best regards,
Krzysztof

  reply	other threads:[~2022-05-12 10:28 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-12  6:30 [PATCH v15 00/10] Add Sunplus SP7021 SoC Support Qin Jian
2022-05-12  6:30 ` [PATCH v15 01/10] dt-bindings: arm: sunplus: Add bindings for Sunplus SP7021 SoC boards Qin Jian
2022-05-16 18:29   ` Rob Herring
2022-05-12  6:30 ` [PATCH v15 02/10] dt-bindings: reset: Add bindings for SP7021 reset driver Qin Jian
2022-05-12  6:30 ` [PATCH v15 03/10] reset: Add Sunplus " Qin Jian
2022-05-12  6:30 ` [PATCH v15 04/10] dt-bindings: clock: Add bindings for SP7021 clock driver Qin Jian
2022-05-12 10:24   ` Krzysztof Kozlowski
2022-05-12 10:45     ` qinjian[覃健]
2022-05-12 10:54       ` Krzysztof Kozlowski
2022-05-13  3:22         ` qinjian[覃健]
2022-05-17  2:19   ` Stephen Boyd
2022-05-17  9:37     ` qinjian[覃健]
2022-05-12  6:31 ` [PATCH v15 05/10] clk: Add Sunplus " Qin Jian
2022-05-17  2:17   ` Stephen Boyd
2022-05-17  9:30     ` qinjian[覃健]
     [not found]       ` <20220518202049.6055BC385A9@smtp.kernel.org>
2022-05-19  2:16         ` qinjian[覃健]
2022-05-12  6:31 ` [PATCH v15 06/10] dt-bindings: interrupt-controller: Add bindings for SP7021 interrupt controller Qin Jian
2022-05-12  6:31 ` [PATCH v15 07/10] irqchip: Add Sunplus SP7021 interrupt controller driver Qin Jian
2022-05-12  6:31 ` [PATCH v15 08/10] ARM: sunplus: Add initial support for Sunplus SP7021 SoC Qin Jian
2022-05-12  6:31 ` [PATCH v15 09/10] ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig Qin Jian
2022-05-13 11:27   ` Arnd Bergmann
2022-05-12  6:31 ` [PATCH v15 10/10] ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree Qin Jian
2022-05-12 10:28   ` Krzysztof Kozlowski [this message]
2022-05-13  7:44     ` qinjian[覃健]
2022-05-13  8:10       ` Krzysztof Kozlowski
2022-05-13  9:47         ` qinjian[覃健]
2022-05-13 11:29 ` [PATCH v15 00/10] Add Sunplus SP7021 SoC Support Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=32c80a79-abd5-3fd2-cbb4-e2ae93c539da@linaro.org \
    --to=krzysztof.kozlowski@linaro.org \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=maz@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=qinjian@cqplus1.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).