[PATCH 1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: use fallback compatibles

[PATCH 1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: use fallback compatibles

[Krzysztof Kozlowski]

Document SoC-specific compatibles with generic fallback (e.g.
qcom,usb-snps-hs-7nm-phy) already used in DTSI.  Add SoC-specific
compatibles for PHY on SDX55 and SDX65.

This disallows usage of the qcom,usb-snps-hs-5nm-phy and
qcom,usb-snps-hs-7nm-phy generic compatibles alone.  Do not touch
remaining two compatibles - qcom,usb-snps-femto-v2-phy and
qcom,sc8180x-usb-hs-phy - because there are no upstream users, so not
sure what was the intention for them.

This fixes warnings like:

  sa8295p-adp.dtb: phy@88e5000: compatible: 'oneOf' conditional failed, one must be fixed:
    ['qcom,sc8280xp-usb-hs-phy', 'qcom,usb-snps-hs-5nm-phy'] is too long
    'qcom,sc8280xp-usb-hs-phy' is not one of ['qcom,sm8150-usb-hs-phy', 'qcom,sm8250-usb-hs-phy', 'qcom,sm8350-usb-hs-phy', 'qcom,sm8450-usb-hs-phy']
    'qcom,usb-snps-hs-7nm-phy' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/phy/qcom,usb-snps-femto-v2.yaml  | 33 +++++++++++--------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 68e70961beb2..85d405e028b9 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -14,18 +14,25 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,usb-snps-hs-5nm-phy
-      - qcom,usb-snps-hs-7nm-phy
-      - qcom,sc7280-usb-hs-phy
-      - qcom,sc8180x-usb-hs-phy
-      - qcom,sc8280xp-usb-hs-phy
-      - qcom,sm6375-usb-hs-phy
-      - qcom,sm8150-usb-hs-phy
-      - qcom,sm8250-usb-hs-phy
-      - qcom,sm8350-usb-hs-phy
-      - qcom,sm8450-usb-hs-phy
-      - qcom,usb-snps-femto-v2-phy
+    oneOf:
+      - enum:
+          - qcom,sc8180x-usb-hs-phy
+          - qcom,usb-snps-femto-v2-phy
+      - items:
+          - enum:
+              - qcom,sc8280xp-usb-hs-phy
+          - const: qcom,usb-snps-hs-5nm-phy
+      - items:
+          - enum:
+              - qcom,sc7280-usb-hs-phy
+              - qcom,sdx55-usb-hs-phy
+              - qcom,sdx65-usb-hs-phy
+              - qcom,sm6375-usb-hs-phy
+              - qcom,sm8150-usb-hs-phy
+              - qcom,sm8250-usb-hs-phy
+              - qcom,sm8350-usb-hs-phy
+              - qcom,sm8450-usb-hs-phy
+          - const: qcom,usb-snps-hs-7nm-phy
 
   reg:
     maxItems: 1
@@ -160,7 +167,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/clock/qcom,gcc-sm8150.h>
     phy@88e2000 {
-        compatible = "qcom,sm8150-usb-hs-phy";
+        compatible = "qcom,sm8150-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
         reg = <0x088e2000 0x400>;
         #phy-cells = <0>;
 
-- 
2.34.1

[PATCH 2/4] ARM: dts: qcom: sdx55: add specific compatible for USB HS PHY

[Krzysztof Kozlowski]

Add SoC-specific compatible to the USB HS PHY to match other devices and
bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx55.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index f1c0dab40992..5408ff715fbf 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -214,7 +214,8 @@ blsp1_uart3: serial@831000 {
 		};
 
 		usb_hsphy: phy@ff4000 {
-			compatible = "qcom,usb-snps-hs-7nm-phy";
+			compatible = "qcom,sdx55-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0x00ff4000 0x114>;
 			status = "disabled";
 			#phy-cells = <0>;
-- 
2.34.1

Re: [PATCH 2/4] ARM: dts: qcom: sdx55: add specific compatible for USB HS PHY

[Konrad Dybcio]

On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
> Add SoC-specific compatible to the USB HS PHY to match other devices and
> bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  arch/arm/boot/dts/qcom-sdx55.dtsi | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
> index f1c0dab40992..5408ff715fbf 100644
> --- a/arch/arm/boot/dts/qcom-sdx55.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
> @@ -214,7 +214,8 @@ blsp1_uart3: serial@831000 {
>  		};
>  
>  		usb_hsphy: phy@ff4000 {
> -			compatible = "qcom,usb-snps-hs-7nm-phy";
> +			compatible = "qcom,sdx55-usb-hs-phy",
> +				     "qcom,usb-snps-hs-7nm-phy";
same as in 3/4
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  			reg = <0x00ff4000 0x114>;
>  			status = "disabled";
>  			#phy-cells = <0>;

[PATCH 3/4] ARM: dts: qcom: sdx65: add specific compatible for USB HS PHY

[Krzysztof Kozlowski]

Add SoC-specific compatible to the USB HS PHY to match other devices and
bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index b073e0c63df4..d3c661d7650d 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
 		};
 
 		usb_hsphy: phy@ff4000 {
-			compatible = "qcom,usb-snps-hs-7nm-phy";
+			compatible = "qcom,sdx65-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0xff4000 0x120>;
 			#phy-cells = <0>;
 			status = "disabled";
-- 
2.34.1

Re: [PATCH 3/4] ARM: dts: qcom: sdx65: add specific compatible for USB HS PHY

[Konrad Dybcio]

On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
> Add SoC-specific compatible to the USB HS PHY to match other devices and
> bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
> index b073e0c63df4..d3c661d7650d 100644
> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
> @@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
>  		};
>  
>  		usb_hsphy: phy@ff4000 {
> -			compatible = "qcom,usb-snps-hs-7nm-phy";
> +			compatible = "qcom,sdx65-usb-hs-phy",
> +				     "qcom,usb-snps-hs-7nm-phy";
Not sure if the newline is necessary, but still:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  			reg = <0xff4000 0x120>;
>  			#phy-cells = <0>;
>  			status = "disabled";

Re: [PATCH 3/4] ARM: dts: qcom: sdx65: add specific compatible for USB HS PHY

[Krzysztof Kozlowski]

On 23/12/2022 17:20, Konrad Dybcio wrote:
> 
> 
> On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
>> Add SoC-specific compatible to the USB HS PHY to match other devices and
>> bindings.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
>> index b073e0c63df4..d3c661d7650d 100644
>> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
>> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
>> @@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
>>  		};
>>  
>>  		usb_hsphy: phy@ff4000 {
>> -			compatible = "qcom,usb-snps-hs-7nm-phy";
>> +			compatible = "qcom,sdx65-usb-hs-phy",
>> +				     "qcom,usb-snps-hs-7nm-phy";
> Not sure if the newline is necessary, but still:
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

It is over 80 - up to 90 - and we still keep 80-limit in coding style.

Best regards,
Krzysztof

Re: [PATCH 3/4] ARM: dts: qcom: sdx65: add specific compatible for USB HS PHY

[Konrad Dybcio]

On 24.12.2022 14:12, Krzysztof Kozlowski wrote:
> On 23/12/2022 17:20, Konrad Dybcio wrote:
>>
>>
>> On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
>>> Add SoC-specific compatible to the USB HS PHY to match other devices and
>>> bindings.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> ---
>>>  arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> index b073e0c63df4..d3c661d7650d 100644
>>> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> @@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
>>>  		};
>>>  
>>>  		usb_hsphy: phy@ff4000 {
>>> -			compatible = "qcom,usb-snps-hs-7nm-phy";
>>> +			compatible = "qcom,sdx65-usb-hs-phy",
>>> +				     "qcom,usb-snps-hs-7nm-phy";
>> Not sure if the newline is necessary, but still:
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> 
> It is over 80 - up to 90 - and we still keep 80-limit in coding style.
Torvalds said 100 is fine a year a go or so.

Konrad
> 
> Best regards,
> Krzysztof
> 

Re: [PATCH 3/4] ARM: dts: qcom: sdx65: add specific compatible for USB HS PHY

[Krzysztof Kozlowski]

On 27/12/2022 12:14, Konrad Dybcio wrote:
> 
> 
> On 24.12.2022 14:12, Krzysztof Kozlowski wrote:
>> On 23/12/2022 17:20, Konrad Dybcio wrote:
>>>
>>>
>>> On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
>>>> Add SoC-specific compatible to the USB HS PHY to match other devices and
>>>> bindings.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>>> ---
>>>>  arch/arm/boot/dts/qcom-sdx65.dtsi | 3 ++-
>>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>>> index b073e0c63df4..d3c661d7650d 100644
>>>> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
>>>> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>>> @@ -219,7 +219,8 @@ blsp1_uart3: serial@831000 {
>>>>  		};
>>>>  
>>>>  		usb_hsphy: phy@ff4000 {
>>>> -			compatible = "qcom,usb-snps-hs-7nm-phy";
>>>> +			compatible = "qcom,sdx65-usb-hs-phy",
>>>> +				     "qcom,usb-snps-hs-7nm-phy";
>>> Not sure if the newline is necessary, but still:
>>>
>>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>
>> It is over 80 - up to 90 - and we still keep 80-limit in coding style.
> Torvalds said 100 is fine a year a go or so.

Yes - when it increases the readability. When it does not, the limit by
coding style is still 80. Otherwise the coding style would be updated,
which did not happen:

https://lore.kernel.org/all/20220119160642.140e84c6@gandalf.local.home/




Best regards,
Krzysztof

[PATCH 4/4] arm64: dts: qcom: sm8350: align MMC node names with DT schema

[Krzysztof Kozlowski]

The bindings expect "mmc" for MMC/SDHCI nodes:

  sm8350-sony-xperia-sagami-pdx214.dtb: sdhci@8804000: $nodename:0: 'sdhci@8804000' does not match '^mmc(@.*)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 245dce24ec59..18aa4bd073f3 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2369,7 +2369,7 @@ compute-cb@8 {
 			};
 		};
 
-		sdhc_2: sdhci@8804000 {
+		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
 
-- 
2.34.1

Re: [PATCH 4/4] arm64: dts: qcom: sm8350: align MMC node names with DT schema

[Konrad Dybcio]

On 23.12.2022 17:18, Krzysztof Kozlowski wrote:
> The bindings expect "mmc" for MMC/SDHCI nodes:
> 
>   sm8350-sony-xperia-sagami-pdx214.dtb: sdhci@8804000: $nodename:0: 'sdhci@8804000' does not match '^mmc(@.*)?$'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 245dce24ec59..18aa4bd073f3 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -2369,7 +2369,7 @@ compute-cb@8 {
>  			};
>  		};
>  
> -		sdhc_2: sdhci@8804000 {
> +		sdhc_2: mmc@8804000 {
>  			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
>  			reg = <0 0x08804000 0 0x1000>;
>  

Re: (subset) [PATCH 1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: use fallback compatibles

[Bjorn Andersson]

On Fri, 23 Dec 2022 17:18:32 +0100, Krzysztof Kozlowski wrote:
> Document SoC-specific compatibles with generic fallback (e.g.
> qcom,usb-snps-hs-7nm-phy) already used in DTSI.  Add SoC-specific
> compatibles for PHY on SDX55 and SDX65.
> 
> This disallows usage of the qcom,usb-snps-hs-5nm-phy and
> qcom,usb-snps-hs-7nm-phy generic compatibles alone.  Do not touch
> remaining two compatibles - qcom,usb-snps-femto-v2-phy and
> qcom,sc8180x-usb-hs-phy - because there are no upstream users, so not
> sure what was the intention for them.
> 
> [...]

Applied, thanks!

[4/4] arm64: dts: qcom: sm8350: align MMC node names with DT schema
      commit: 06a0676b5de9221537156957b90b2b69dfceebba

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: [PATCH 1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: use fallback compatibles

[Rob Herring]

On Fri, 23 Dec 2022 17:18:32 +0100, Krzysztof Kozlowski wrote:
> Document SoC-specific compatibles with generic fallback (e.g.
> qcom,usb-snps-hs-7nm-phy) already used in DTSI.  Add SoC-specific
> compatibles for PHY on SDX55 and SDX65.
> 
> This disallows usage of the qcom,usb-snps-hs-5nm-phy and
> qcom,usb-snps-hs-7nm-phy generic compatibles alone.  Do not touch
> remaining two compatibles - qcom,usb-snps-femto-v2-phy and
> qcom,sc8180x-usb-hs-phy - because there are no upstream users, so not
> sure what was the intention for them.
> 
> This fixes warnings like:
> 
>   sa8295p-adp.dtb: phy@88e5000: compatible: 'oneOf' conditional failed, one must be fixed:
>     ['qcom,sc8280xp-usb-hs-phy', 'qcom,usb-snps-hs-5nm-phy'] is too long
>     'qcom,sc8280xp-usb-hs-phy' is not one of ['qcom,sm8150-usb-hs-phy', 'qcom,sm8250-usb-hs-phy', 'qcom,sm8350-usb-hs-phy', 'qcom,sm8450-usb-hs-phy']
>     'qcom,usb-snps-hs-7nm-phy' was expected
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/phy/qcom,usb-snps-femto-v2.yaml  | 33 +++++++++++--------
>  1 file changed, 20 insertions(+), 13 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 1/4] dt-bindings: phy: qcom,usb-snps-femto-v2: use fallback compatibles

[Vinod Koul]

On 23-12-22, 17:18, Krzysztof Kozlowski wrote:
> Document SoC-specific compatibles with generic fallback (e.g.
> qcom,usb-snps-hs-7nm-phy) already used in DTSI.  Add SoC-specific
> compatibles for PHY on SDX55 and SDX65.
> 
> This disallows usage of the qcom,usb-snps-hs-5nm-phy and
> qcom,usb-snps-hs-7nm-phy generic compatibles alone.  Do not touch
> remaining two compatibles - qcom,usb-snps-femto-v2-phy and
> qcom,sc8180x-usb-hs-phy - because there are no upstream users, so not
> sure what was the intention for them.

Applied, thanks

-- 
~Vinod