* [PATCH] arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power
@ 2024-01-07 22:37 Hugh Cole-Baker
2024-01-08 7:00 ` Krzysztof Kozlowski
0 siblings, 1 reply; 2+ messages in thread
From: Hugh Cole-Baker @ 2024-01-07 22:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiko Stuebner
Cc: John Clark, Thomas McKahan, Hugh Cole-Baker, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
The NanoPC-T6 has a Mini PCIe slot intended to be used for a 4G or LTE
modem. This slot has no PCIe functionality, only its USB 2.0 pins are
wired to the SoC, and its USIM pins are wired to a SIM card slot on the
board. Define the 3.3v supply for the slot so it can be used.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
---
I've based the names directly on the schematic [1] (page 29) which uses
VDD_4G_3.3V and 4G_LTE_PWREN for the supply and enable signal respectively.
This means the enable pinctrl label needs an initial underscore. I'm OK with
changing that if it's considered ugly or there's a better suggested name.
[1]: https://wiki.friendlyelec.com/wiki/images/9/97/NanoPC-T6_2301_SCH.PDF
.../boot/dts/rockchip/rk3588-nanopc-t6.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
index d7722772ecd8..d91af387f7c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -159,6 +159,18 @@ vcc3v3_pcie30: vcc3v3-pcie30-regulator {
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
+
+ vdd_4g_3v3: vdd-4g-3v3-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&_4g_lte_pwren>;
+ regulator-name = "vdd_4g_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
};
&combphy0_ps {
@@ -504,6 +516,10 @@ pcie_m2_1_pwren: pcie-m21-pwren {
};
usb {
+ _4g_lte_pwren: 4g-lte-pwren {
+ rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
typec5v_pwren: typec5v-pwren {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -884,6 +900,7 @@ &uart2 {
};
&u2phy2_host {
+ phy-supply = <&vdd_4g_3v3>;
status = "okay";
};
--
2.39.3 (Apple Git-145)
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power
2024-01-07 22:37 [PATCH] arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power Hugh Cole-Baker
@ 2024-01-08 7:00 ` Krzysztof Kozlowski
0 siblings, 0 replies; 2+ messages in thread
From: Krzysztof Kozlowski @ 2024-01-08 7:00 UTC (permalink / raw)
To: Hugh Cole-Baker, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Heiko Stuebner
Cc: John Clark, Thomas McKahan, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel
On 07/01/2024 23:37, Hugh Cole-Baker wrote:
> The NanoPC-T6 has a Mini PCIe slot intended to be used for a 4G or LTE
> modem. This slot has no PCIe functionality, only its USB 2.0 pins are
> wired to the SoC, and its USIM pins are wired to a SIM card slot on the
> board. Define the 3.3v supply for the slot so it can be used.
>
> Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
> ---
...
>
> &combphy0_ps {
> @@ -504,6 +516,10 @@ pcie_m2_1_pwren: pcie-m21-pwren {
> };
>
> usb {
> + _4g_lte_pwren: 4g-lte-pwren {
Labels start with alphanumeric characters.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-01-08 7:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-07 22:37 [PATCH] arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power Hugh Cole-Baker
2024-01-08 7:00 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).