From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?Guido=20G=C3=BCnther?= Subject: [PATCH RESEND v7 2/3] dt-bindings: phy: Add documentation for mixel dphy Date: Wed, 27 Mar 2019 09:20:00 +0100 Message-ID: <3319783f60fedd7f0029dd60a51c76a75003fe05.1553674604.git.agx@sigxcpu.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Kishon Vijay Abraham I , Rob Herring , Mark Rutland , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Thierry Reding , =?UTF-8?q?Andreas=20F=C3=A4rber?= , Martin Blumenstingl , Heiko Stuebner , Johan Hovold , Lucas Stach , Abel Vesa , Li Jun , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org, Robert List-Id: devicetree@vger.kernel.org Add support for the MIXEL DPHY IP as found in the NXP's i.MX8MQ. Signed-off-by: Guido Günther Reviewed-by: Sam Ravnborg --- .../bindings/phy/mixel,mipi-dsi-phy.txt | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt new file mode 100644 index 000000000000..d3646580412a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt @@ -0,0 +1,29 @@ +Mixel DSI PHY for i.MX8 + +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the +electrical signals for DSI. + +Required properties: +- compatible: Must be: + - "mixel,imx8mq-mipi-dphy" +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "phy_ref": phandle and specifier referring to the DPHY ref clock +- reg: the register range of the PHY controller +- #phy-cells: number of cells in PHY, as defined in + Documentation/devicetree/bindings/phy/phy-bindings.txt + this must be <0> + +Optional properties: +- power-domains: phandle to power domain + +Example: + mipi_dphy: mipi_dphy@30A0030 { + compatible = "mixel,imx8mq-mipi-dphy"; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + reg = <0x30A00300 0x100>; + power-domains = <&pd_mipi0>; + #phy-cells = <0>; + }; -- 2.20.1