Re: [PATCH v4 3/4] ARM: dts: add main Thermal info to rk3288

["Heiko Stübner" <heiko@sntech.de>]

Am Mittwoch, 3. September 2014, 10:10:38 schrieb Caesar Wang:
> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
> ---
>  arch/arm/boot/dts/rk3288.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 36be7bb..3d672e3 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -224,6 +224,17 @@
>  		status = "disabled";
>  	};
> 
> +	tsadc: tsadc@ff280000 {

please keep the list of nodes sorted by register address. So when looking at 
my v3.18-next/dts branch, it should be after uart4: serial@ff1c0000 and before 
usb_host0_ehci: usb@ff500000 .


> +		compatible = "rockchip,rk3288-tsadc";
> +		reg = <0xff280000 0x100>;
> +		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
> +		clock-names = "tsadc", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-1 = <&tsadc_int>;
> +		status = "disabled";
> +	};
> +
>  	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
> 
>  	usb_hsic: usb@ff5c0000 {
> @@ -611,5 +622,12 @@
>  				rockchip,pins = <5 15 3 &pcfg_pull_none>;
>  			};
>  		};
> +
> +		tsadc {
> +			tsadc_int: tsadc-int {
> +				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +		};

After looking this up in the schematics I see that this is the 
overtemperature-protection output pin ... labeled OTP_OUT.
So I'd think the pinconfig should reflect this pin-name, especially as tsadc-int 
suggests, that this would be an interrupt leading into the tsadc, while in 
fact it is an output to a separate circuit.


Heiko