[PATCH v6 1/3] media: adv748x: Add adv7181, adv7182 bindings

[PATCH v6 1/3] media: adv748x: Add adv7181, adv7182 bindings

[Kieran Bingham]

From: Kieran Bingham <kieran.bingham+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>

Create device tree bindings documentation for the ADV748x.
The ADV748x supports both the ADV7481 and ADV7482 chips which
provide analogue decoding and HDMI receiving capabilities

Signed-off-by: Kieran Bingham <kieran.bingham+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>

---
v6:
 - Clean up description and remove redundant text regarding optional
   nodes

 Documentation/devicetree/bindings/media/i2c/adv748x.txt | 95 ++++++++++-
 1 file changed, 95 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/adv748x.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
new file mode 100644
index 000000000000..21ffb5ed8183
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -0,0 +1,95 @@
+* Analog Devices ADV748X video decoder with HDMI receiver
+
+The ADV7481 and ADV7482 are multi format video decoders with an integrated
+HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
+from three input sources HDMI, analog and TTL.
+
+Required Properties:
+
+  - compatible: Must contain one of the following
+    - "adi,adv7481" for the ADV7481
+    - "adi,adv7482" for the ADV7482
+
+  - reg: I2C slave address
+
+Optional Properties:
+
+  - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
+		     "intrq3". All interrupts are optional. The "intrq3" interrupt
+		     is only available on the adv7481
+  - interrupts: Specify the interrupt lines for the ADV748x
+
+The device node must contain one 'port' child node per device input and output
+port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
+are numbered as follows.
+
+	  Name		Type		Port
+	---------------------------------------
+	  AIN0		sink		0
+	  AIN1		sink		1
+	  AIN2		sink		2
+	  AIN3		sink		3
+	  AIN4		sink		4
+	  AIN5		sink		5
+	  AIN6		sink		6
+	  AIN7		sink		7
+	  HDMI		sink		8
+	  TTL		sink		9
+	  TXA		source		10
+	  TXB		source		11
+
+The digital output port nodes must contain at least one endpoint.
+
+Ports are optional if they are not connected to anything at the hardware level.
+
+Example:
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gpio6>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
+			     <31 IRQ_TYPE_LEVEL_LOW>;
+
+		port@7 {
+			reg = <7>;
+
+			adv7482_ain7: endpoint {
+				remote-endpoint = <&cvbs_in>;
+			};
+		};
+
+		port@8 {
+			reg = <8>;
+
+			adv7482_hdmi: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+
+		port@10 {
+			reg = <10>;
+
+			adv7482_txa: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+
+		port@11 {
+			reg = <11>;
+
+			adv7482_txb: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1>;
+				remote-endpoint = <&csi20_in>;
+			};
+		};
+	};
-- 
git-series 0.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 1/3] media: adv748x: Add adv7181, adv7182 bindings

[Geert Uytterhoeven]

On Tue, Jun 27, 2017 at 5:03 PM, Kieran Bingham <kbingham-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> From: Kieran Bingham <kieran.bingham+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
>
> Create device tree bindings documentation for the ADV748x.
> The ADV748x supports both the ADV7481 and ADV7482 chips which
> provide analogue decoding and HDMI receiving capabilities

The subject says adv7*1*81, adv7*1*82.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 1/3] media: adv748x: Add adv7181, adv7182 bindings

[Kieran Bingham]

On 29/06/17 10:37, Geert Uytterhoeven wrote:
> On Tue, Jun 27, 2017 at 5:03 PM, Kieran Bingham <kbingham-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
>> From: Kieran Bingham <kieran.bingham+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
>>
>> Create device tree bindings documentation for the ADV748x.
>> The ADV748x supports both the ADV7481 and ADV7482 chips which
>> provide analogue decoding and HDMI receiving capabilities
> 
> The subject says adv7*1*81, adv7*1*82.

Indeed it does. I'm not sure how I managed to typo that...
My usual typo is adv749x instead :)


Thanks for the spot!

--
Kieran

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
> 

-- 
--
Kieran
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 1/3] media: adv748x: Add adv7181, adv7182 bindings

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Tuesday 27 Jun 2017 16:03:32 Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
> 
> Create device tree bindings documentation for the ADV748x.
> The ADV748x supports both the ADV7481 and ADV7482 chips which
> provide analogue decoding and HDMI receiving capabilities
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>

With the subject fixed,

Reviewed-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>

> ---
> v6:
>  - Clean up description and remove redundant text regarding optional
>    nodes
> 
>  Documentation/devicetree/bindings/media/i2c/adv748x.txt | 95 ++++++++++-
>  1 file changed, 95 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/adv748x.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> b/Documentation/devicetree/bindings/media/i2c/adv748x.txt new file mode
> 100644
> index 000000000000..21ffb5ed8183
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> @@ -0,0 +1,95 @@
> +* Analog Devices ADV748X video decoder with HDMI receiver
> +
> +The ADV7481 and ADV7482 are multi format video decoders with an integrated
> +HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
> +from three input sources HDMI, analog and TTL.
> +
> +Required Properties:
> +
> +  - compatible: Must contain one of the following
> +    - "adi,adv7481" for the ADV7481
> +    - "adi,adv7482" for the ADV7482
> +
> +  - reg: I2C slave address
> +
> +Optional Properties:
> +
> +  - interrupt-names: Should specify the interrupts as "intrq1", "intrq2"
> and/or +		     "intrq3". All interrupts are optional. The 
"intrq3"
> interrupt +		     is only available on the adv7481
> +  - interrupts: Specify the interrupt lines for the ADV748x
> +
> +The device node must contain one 'port' child node per device input and
> output +port, in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt. The port
> nodes +are numbered as follows.
> +
> +	  Name		Type		Port
> +	---------------------------------------
> +	  AIN0		sink		0
> +	  AIN1		sink		1
> +	  AIN2		sink		2
> +	  AIN3		sink		3
> +	  AIN4		sink		4
> +	  AIN5		sink		5
> +	  AIN6		sink		6
> +	  AIN7		sink		7
> +	  HDMI		sink		8
> +	  TTL		sink		9
> +	  TXA		source		10
> +	  TXB		source		11
> +
> +The digital output port nodes must contain at least one endpoint.
> +
> +Ports are optional if they are not connected to anything at the hardware
> level. +
> +Example:
> +
> +	video-receiver@70 {
> +		compatible = "adi,adv7482";
> +		reg = <0x70>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		interrupt-parent = <&gpio6>;
> +		interrupt-names = "intrq1", "intrq2";
> +		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
> +			     <31 IRQ_TYPE_LEVEL_LOW>;
> +
> +		port@7 {
> +			reg = <7>;
> +
> +			adv7482_ain7: endpoint {
> +				remote-endpoint = <&cvbs_in>;
> +			};
> +		};
> +
> +		port@8 {
> +			reg = <8>;
> +
> +			adv7482_hdmi: endpoint {
> +				remote-endpoint = <&hdmi_in>;
> +			};
> +		};
> +
> +		port@10 {
> +			reg = <10>;
> +
> +			adv7482_txa: endpoint {
> +				clock-lanes = <0>;
> +				data-lanes = <1 2 3 4>;
> +				remote-endpoint = <&csi40_in>;
> +			};
> +		};
> +
> +		port@11 {
> +			reg = <11>;
> +
> +			adv7482_txb: endpoint {
> +				clock-lanes = <0>;
> +				data-lanes = <1>;
> +				remote-endpoint = <&csi20_in>;
> +			};
> +		};
> +	};

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6.1 1/3] media: adv748x: Add adv7481, adv7482 bindings

[Kieran Bingham]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Create device tree bindings documentation for the ADV748x.
The ADV748x supports both the ADV7481 and ADV7482 chips which
provide analogue decoding and HDMI receiving capabilities

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v6:
 - Clean up description and remove redundant text regarding optional
   nodes

v6.1:
 - Fix commit title

 Documentation/devicetree/bindings/media/i2c/adv748x.txt | 95 ++++++++++-
 1 file changed, 95 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/adv748x.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
new file mode 100644
index 000000000000..21ffb5ed8183
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -0,0 +1,95 @@
+* Analog Devices ADV748X video decoder with HDMI receiver
+
+The ADV7481 and ADV7482 are multi format video decoders with an integrated
+HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
+from three input sources HDMI, analog and TTL.
+
+Required Properties:
+
+  - compatible: Must contain one of the following
+    - "adi,adv7481" for the ADV7481
+    - "adi,adv7482" for the ADV7482
+
+  - reg: I2C slave address
+
+Optional Properties:
+
+  - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
+		     "intrq3". All interrupts are optional. The "intrq3" interrupt
+		     is only available on the adv7481
+  - interrupts: Specify the interrupt lines for the ADV748x
+
+The device node must contain one 'port' child node per device input and output
+port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
+are numbered as follows.
+
+	  Name		Type		Port
+	---------------------------------------
+	  AIN0		sink		0
+	  AIN1		sink		1
+	  AIN2		sink		2
+	  AIN3		sink		3
+	  AIN4		sink		4
+	  AIN5		sink		5
+	  AIN6		sink		6
+	  AIN7		sink		7
+	  HDMI		sink		8
+	  TTL		sink		9
+	  TXA		source		10
+	  TXB		source		11
+
+The digital output port nodes must contain at least one endpoint.
+
+Ports are optional if they are not connected to anything at the hardware level.
+
+Example:
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gpio6>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
+			     <31 IRQ_TYPE_LEVEL_LOW>;
+
+		port@7 {
+			reg = <7>;
+
+			adv7482_ain7: endpoint {
+				remote-endpoint = <&cvbs_in>;
+			};
+		};
+
+		port@8 {
+			reg = <8>;
+
+			adv7482_hdmi: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+
+		port@10 {
+			reg = <10>;
+
+			adv7482_txa: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+
+		port@11 {
+			reg = <11>;
+
+			adv7482_txb: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1>;
+				remote-endpoint = <&csi20_in>;
+			};
+		};
+	};
-- 
git-series 0.9.1