Re: [PATCH] PCI: keystone: update to support multiple pci ports

[Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>]

On Friday 05 September 2014 14:33:54 Murali Karicheri wrote:
> > This looks like it's a shared register of some sort that doesn't
> > really belong into the registers of a particular port. Could it
> > be that it's actually for the PHY?
> >
> This a shared device configuration register between the two ports the 
> desciption states it is bootstrap configuration of the PCIe module as 
> Endpoint or Root complex and Not Phy. Hope below text will help.

Ok. Why do you want to have this user-selectable though? Can't it
just be set by the boot loader before starting Linux?

	Arnd

> Table 3-23 Device Configuration Register (DEVCFG)
> 
> 
> PCIESSMODE[1:0] 00b PCIESSMODE is used to control the
> functionality of PCIESS module out of
> reset. This MMR output is connected to
> DEVTYPE input of PCIESS
> (Changes from
> Nysh) : Note that in Nysh this value came
> from a bootstrap pin.
> 00 : Endpoint
> 01 : Legacy Endpoint
> 10 : Rootcomplex
> 11 : Reserved
> PCIESS_1_MODE[1:0
> ]
> 00b PCIESSMODE is used to control the
> functionality of PCIE_1 module out of
> reset. This MMR output is connected to
> DEVTYPE input of PCIE_1
> 00 : Endpoint
> 01 : Legacy Endpoint
> 10 : Rootcomplex
> 11 : Reserv
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html