Re: [PATCH v4 3/3] arm64: dts: imx: add imx95 dts for sof

[Mihalcea Laurentiu <laurentiumihalcea111@gmail.com>]

On 12.02.2025 01:23, Frank Li wrote:
> On Tue, Feb 11, 2025 at 05:58:08PM -0500, Laurentiu Mihalcea wrote:
>> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>>
>> Add imx95 DTS for SOF usage.
>>
>> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>> ---
>>  arch/arm64/boot/dts/freescale/Makefile        |  1 +
>>  .../dts/freescale/imx95-19x19-evk-sof.dts     | 85 +++++++++++++++++++
>>  2 files changed, 86 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
>>
>> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
>> index 839432153cc7..27f64e333e4b 100644
>> --- a/arch/arm64/boot/dts/freescale/Makefile
>> +++ b/arch/arm64/boot/dts/freescale/Makefile
>> @@ -282,6 +282,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
>>  dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
>>  dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
>> +dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
> look like should use dt overlay ?


can you pls explain why you'd see this as an overlay?

(snip)

>> +
>> +	sof-sound-wm8962 {
>> +		compatible = "audio-graph-card2";
>> +		links = <&cpu>;
>> +		label = "wm8962-audio";
>> +		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_hp>;
>> +		widgets =
>> +			"Headphone", "Headphones",
>> +			"Microphone", "Headset Mic";
> Generally, align to  =
> 	widgets = "Headphone", "Headphones",
> 		  "Microphone", "Headset Mic";


sure


>> +		routing =
>> +			"Headphones", "HPOUTL",
>> +			"Headphones", "HPOUTR",
>> +			"Headset Mic", "MICBIAS",
>> +			"IN3R", "Headset Mic",
>> +			"IN1R", "Headset Mic";
>> +	};
>> +
>> +	sound-wm8962 {
>> +		status = "disabled";
>> +	};
>> +
>> +};
>> +
>> +&edma2 {
>> +	dma-channel-mask = <0xc0000000>, <0x0>;
>> +};
> Not sure why need mask edma2's some channel, can you add comments for it
>
> Frank


sure, can add comment in commit msg