From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnd Bergmann Subject: Re: [PATCH v8 09/10] rtc: at91sam9: add DT bindings documentation Date: Tue, 23 Sep 2014 14:56:37 +0200 Message-ID: <3728270.N2tTcyeJmL@wuerfel> References: <1411471444-2764-1-git-send-email-boris.brezillon@free-electrons.com> <1411471444-2764-10-git-send-email-boris.brezillon@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <1411471444-2764-10-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org Cc: Boris BREZILLON , Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Andrew Victor , Alessandro Zummo , rtc-linux@googlegroups.com, Samuel Ortiz , Lee Jones , Johan Hovold , Mark Rutland , devicetree@vger.kernel.org, Pawel Moll , Ian Campbell , linux-kernel@vger.kernel.org, Rob Herring , Kumar Gala List-Id: devicetree@vger.kernel.org On Tuesday 23 September 2014 13:24:03 Boris BREZILLON wrote: > Add RTT bindings documentation. Two minor comments here: > +Atmel AT91SAM9260 Real Time Timer > + > +Required properties: > +- compatible: should be: "atmel,at91sam9260-rtt" > +- reg: should encode the memory region of the RTT controller > +- interrupts: rtt alarm/event interrupt > +- clocks: should contain one clock pointing to the slow clk This should document what the clock is used for, not where it's connected. > + > +rtt@fffffe00 { > + compatible = "atmel,at91sam9260-rtt"; > + reg = <0xfffffd20 0x10>; > + interrupts = <1 4 7>; > + clocks = <&clk32k>; > + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; > +}; > The register address fffffd20 does not match the name fffffe00 Arnd