From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, p.zabel@pengutronix.de,
geert+renesas@glider.be, magnus.damm@gmail.com,
yoshihiro.shimoda.uh@renesas.com, biju.das.jz@bp.renesas.com,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
Date: Fri, 29 Aug 2025 15:17:22 +0300 [thread overview]
Message-ID: <3731e13f-d601-4fe4-a3d2-6dd3289b6396@tuxon.dev> (raw)
In-Reply-To: <aLGUJbA0szYQ_gN4@shikoro>
On 8/29/25 14:51, Wolfram Sang wrote:
>
>>> Yes, I added it and it made the error go away, but still no USB. I
>>
>> The drivers are not probed or you see no activity when connecting USB devices?
>
> Sigh, I was so sure to have checked OHCI/EHCI but only EHCI was enabled :(
>
> Checking with the schematics, I get it that only the rightmost USB-A
> connectors on the carrier board are routed. Those two work fine now.
>
> If that is to be expected, then for the whole series:
Yes, only those 2 are routed on RZ SMARC Carrier II + RZ/G3S SMARC Module.
>
> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
>
Thank you for doing this,
Claudiu
prev parent reply other threads:[~2025-08-29 12:17 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-19 5:42 [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC Claudiu
2025-08-19 5:42 ` [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S Claudiu
2025-08-19 6:29 ` Rob Herring (Arm)
2025-08-19 13:37 ` Rob Herring
2025-08-20 9:40 ` claudiu beznea
2025-08-19 5:42 ` [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe() Claudiu
2025-08-19 5:49 ` Biju Das
2025-08-19 6:01 ` claudiu beznea
2025-08-19 6:34 ` Biju Das
2025-08-19 5:42 ` [PATCH v5 3/7] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support Claudiu
2025-08-19 6:29 ` Rob Herring (Arm)
2025-08-19 5:42 ` [PATCH v5 4/7] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY Claudiu
2025-08-30 12:39 ` Claudiu Beznea
2025-08-19 5:42 ` [PATCH v5 5/7] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC Claudiu
2025-08-19 5:42 ` [PATCH v5 6/7] arm64: dts: renesas: r9a08g045: Add USB support Claudiu
2025-08-19 5:42 ` [PATCH v5 7/7] arm64: dts: renesas: rzg3s-smarc: Enable " Claudiu
2025-08-28 8:56 ` [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC Wolfram Sang
2025-08-28 18:51 ` claudiu beznea
2025-08-29 10:53 ` Wolfram Sang
2025-08-29 11:30 ` claudiu beznea
2025-08-29 11:51 ` Wolfram Sang
2025-08-29 12:17 ` claudiu beznea [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3731e13f-d601-4fe4-a3d2-6dd3289b6396@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).