From: "Heiko Stübner" <heiko@sntech.de>
To: linux-kernel@vger.kernel.org,
Javier Martinez Canillas <javierm@redhat.com>
Cc: Peter Robinson <pbrobinson@gmail.com>,
Javier Martinez Canillas <javierm@redhat.com>,
Caleb Connolly <kc@postmarketos.org>,
Jarrah Gosbell <kernel@undef.tools>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Martijn Braam <martijn@brixit.nl>, Ondrej Jirman <megi@xff.cz>,
Rob Herring <robh+dt@kernel.org>,
Tom Fitzhenry <tom@tom-fitzhenry.me.uk>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org
Subject: Re: [PATCH] arm64: dts: rockchip: Change serial baud rate for Pinephone Pro to 1.5 MB
Date: Tue, 04 Apr 2023 09:51:11 +0200 [thread overview]
Message-ID: <3738011.44csPzL39Z@diego> (raw)
In-Reply-To: <20230403175937.2842085-1-javierm@redhat.com>
Hi,
Am Montag, 3. April 2023, 19:59:37 CEST schrieb Javier Martinez Canillas:
> This baud rate is set for the device by mainline u-boot and is also what
> is set in the Pinebook Pro Device Tree, which is a device similar to the
> PinePhone Pro but with a different form factor.
>
> Otherwise, the baud rate of the firmware and Linux don't match by default
> and a 'console=ttyS2,1500000n8' kernel command line parameter is required
> to have proper output for both.
The interesting question is always if this will break someone else's setup.
I've never really understood the strange setting of 1.5MBps, but on the
other hand it _is_ a reality on most boards.
Personally I don't care that much either way, but would like a comment
from the other people working on that device - if possible.
I guess if we don't hear anything, I'll apply it nevertheless at some point
Heiko
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> ---
>
> I tried to instead get rid of the baud rate altogether, as suggested by
> Peter Robinson. AFAIU that should just pick whatever bad rate has been
> using by the early console.
>
> But neither using 'stdout-path = "serial2" nor 'stdout-path = &uart2'
> worked for me.
>
> In both cases I didn't have any output unless setting a baud rate using
> the 'console='param.
>
> arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> index a0795a2b1cb1..6bbe65bd5bd4 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> @@ -26,7 +26,7 @@ aliases {
> };
>
> chosen {
> - stdout-path = "serial2:115200n8";
> + stdout-path = "serial2:1500000n8";
> };
>
> gpio-keys {
>
> base-commit: 3adf89324a2b2a9dbc2c12d8895021e7e34e3346
>
next prev parent reply other threads:[~2023-04-04 7:51 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-03 17:59 [PATCH] arm64: dts: rockchip: Change serial baud rate for Pinephone Pro to 1.5 MB Javier Martinez Canillas
2023-04-04 7:51 ` Heiko Stübner [this message]
2023-04-04 8:08 ` Javier Martinez Canillas
2023-04-04 8:13 ` Jarrah
2023-04-04 8:18 ` Peter Robinson
2023-04-04 8:25 ` Javier Martinez Canillas
2023-04-04 8:24 ` Javier Martinez Canillas
2023-04-04 8:38 ` Peter Robinson
2023-04-04 8:46 ` Javier Martinez Canillas
2023-04-04 11:31 ` Martijn Braam
2023-04-04 11:42 ` Javier Martinez Canillas
2023-04-04 12:02 ` Ondřej Jirman
2023-04-04 12:36 ` Ondřej Jirman
2023-04-04 14:04 ` Javier Martinez Canillas
2023-04-04 15:40 ` Ondřej Jirman
2023-04-04 12:52 ` Peter Geis
2023-04-04 16:55 ` Heiko Stübner
2023-04-18 12:11 ` Javier Martinez Canillas
2023-04-18 14:26 ` Heiko Stübner
2023-07-21 23:06 ` Javier Martinez Canillas
2023-07-28 18:59 ` Heiko Stuebner
2023-07-28 19:55 ` Maya Matuszczyk
2023-07-28 23:05 ` Javier Martinez Canillas
2023-07-28 20:10 ` Ondřej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3738011.44csPzL39Z@diego \
--to=heiko@sntech.de \
--cc=devicetree@vger.kernel.org \
--cc=javierm@redhat.com \
--cc=kc@postmarketos.org \
--cc=kernel@undef.tools \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=martijn@brixit.nl \
--cc=megi@xff.cz \
--cc=pbrobinson@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tom@tom-fitzhenry.me.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).