From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jyri Sarha Subject: [PATCH v4 08/10] ARM/dts: am33xx: mcasp: Add location for data port registers to reg-property Date: Tue, 8 Oct 2013 22:36:39 +0300 Message-ID: <37c7ee5f2eab24df86baba1bd36da66c5a637744.1381259962.git.jsarha@ti.com> References: Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: Sender: linux-omap-owner@vger.kernel.org To: alsa-devel@alsa-project.org, devicetree@vger.kernel.org Cc: linux-omap@vger.kernel.org, broonie@kernel.org, mark.rutland@arm.com, joelf@ti.com, Jyri Sarha , "Hebbar, Gururaja" , Darren Etheridge List-Id: devicetree@vger.kernel.org This patch adds a second tuple to reg property. The new property tuple describes the memory location for data port registers mapped trough L3 bus on am33xx. The both property tuples are named accordingly in the reg-names property. Signed-off-by: Hebbar, Gururaja Signed-off-by: Darren Etheridge Signed-off-by: Jyri Sarha --- arch/arm/boot/dts/am33xx.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 22659e7..c8ba19e 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -671,7 +671,9 @@ mcasp0: mcasp@48038000 { compatible = "ti,omap2-mcasp-audio"; ti,hwmods = "mcasp0"; - reg = <0x48038000 0x2000>; + reg = <0x48038000 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; interrupts = <80>, <81>; interrupts-names = "tx", "rx"; status = "disabled"; @@ -683,7 +685,9 @@ mcasp1: mcasp@4803C000 { compatible = "ti,omap2-mcasp-audio"; ti,hwmods = "mcasp1"; - reg = <0x4803C000 0x2000>; + reg = <0x4803C000 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; interrupts = <82>, <83>; interrupts-names = "tx", "rx"; status = "disabled"; -- 1.7.9.5