From: barnabas.czeman@mainlining.org
To: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht, linux@mainlining.org,
phone-devel@vger.kernel.org
Subject: Re: [PATCH 5/5] arm64: dts: qcom: Add Redmi Go
Date: Mon, 09 Mar 2026 22:19:20 +0100 [thread overview]
Message-ID: <390f4c8b89f3465924d6ef95bccccc6a@mainlining.org> (raw)
In-Reply-To: <07b552b4-ecdb-4877-8b45-fcaa6792aee4@oss.qualcomm.com>
On 2026-03-09 13:53, Konrad Dybcio wrote:
> On 3/5/26 6:28 PM, Barnabás Czémán wrote:
>> Redmi Go (tiare) is like Redmi 5A with small differences like
>> charging,
>> fuel gauge and different speaker codec.
>>
>> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts | 27
>> +++++++++++++++++++++++
>> 2 files changed, 28 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile
>> b/arch/arm64/boot/dts/qcom/Makefile
>> index 20e161e843ed..a74598cf0b47 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_QCOM) +=
>> msm8916-wingtech-wt88047.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-rolex.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-tiare.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8937-xiaomi-land.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8939-asus-z00t.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts
>> b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts
>> new file mode 100644
>> index 000000000000..c3a74530c34c
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-tiare.dts
>> @@ -0,0 +1,27 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2026, Barnabas Czeman
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "msm8917-xiaomi-riva-common.dtsi"
>> +
>> +/ {
>> + model = "Xiaomi Redmi Go (tiare)";
>> + compatible = "xiaomi,tiare", "qcom,msm8917";
>> +
>> + qcom,board-id = <0x1000b 1>;
>
> Could you please double-check this? Riva and Rolex seem to have
> properly different values there, but this one mimics one of the
> values for Rolex.
riva value is depends from the bootloader, Oreo bootloader using same
value
like rolex and tiare, 2nd entry in the board-id is not used so i should
remove it.
Here is some more context:
https://github.com/msm8916-mainline/lk2nd/blob/main/lk2nd/device/dts/msm8952/msm8917-xiaomi-riva.dts
https://github.com/msm8916-mainline/lk2nd/blob/main/lk2nd/device/dts/msm8952/msm8917-xiaomi-common.dts
>
> FWIW these values are almost never properly fused so I wouldn't be
> surprised if this was a fail.
>
> Konrad
next prev parent reply other threads:[~2026-03-09 21:19 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-05 17:28 [PATCH 0/5] Commonize Redmi 5A for 4A and GO Barnabás Czémán
2026-03-05 17:28 ` [PATCH 1/5] arm64: dts: qcom: msm8917-xiaomi-riva: Commonize for Redmi " Barnabás Czémán
2026-03-06 8:21 ` Krzysztof Kozlowski
2026-03-09 12:55 ` Konrad Dybcio
2026-03-09 21:48 ` barnabas.czeman
2026-03-10 12:57 ` barnabas.czeman
2026-03-10 13:04 ` Konrad Dybcio
2026-03-10 13:11 ` barnabas.czeman
2026-03-10 13:21 ` Konrad Dybcio
2026-03-10 13:26 ` barnabas.czeman
2026-03-10 13:41 ` Konrad Dybcio
2026-03-05 17:28 ` [PATCH 2/5] dt-bindings: arm: qcom: Add Redmi 4A Barnabás Czémán
2026-03-09 10:57 ` Krzysztof Kozlowski
2026-03-09 12:50 ` Konrad Dybcio
2026-03-09 12:54 ` Krzysztof Kozlowski
2026-03-05 17:28 ` [PATCH 3/5] arm64: dts: " Barnabás Czémán
2026-03-09 12:52 ` Konrad Dybcio
2026-03-09 21:25 ` barnabas.czeman
2026-03-05 17:28 ` [PATCH 4/5] dt-bindings: arm: qcom: Add Redmi Go Barnabás Czémán
2026-03-06 8:21 ` Krzysztof Kozlowski
2026-03-06 8:29 ` Krzysztof Kozlowski
2026-03-05 17:28 ` [PATCH 5/5] arm64: dts: " Barnabás Czémán
2026-03-09 12:53 ` Konrad Dybcio
2026-03-09 21:19 ` barnabas.czeman [this message]
2026-03-09 21:36 ` barnabas.czeman
2026-03-10 12:31 ` Konrad Dybcio
2026-03-10 12:47 ` barnabas.czeman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=390f4c8b89f3465924d6ef95bccccc6a@mainlining.org \
--to=barnabas.czeman@mainlining.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@mainlining.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox