Re: [PATCH v1 1/3] dt-bindings: mmc: Add bindings for StarFive

[William Qiu <william.qiu@starfivetech.com>]

On 2022/12/7 22:46, Conor Dooley wrote:
> On Wed, Dec 07, 2022 at 08:19:49AM -0600, Rob Herring wrote:
>> 
>> On Wed, 07 Dec 2022 21:17:29 +0800, William Qiu wrote:
>> > Add documentation to describe StarFive
>> > designware mobile storage host controller driver.
>> > 
>> > Signed-off-by: William Qiu <william.qiu@starfivetech.com>
>> > ---
>> >  .../bindings/mmc/starfive,jh7110-sdio.yaml    | 71 +++++++++++++++++++
>> >  1 file changed, 71 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-sdio.yaml
>> > 
>> 
>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>> 
>> yamllint warnings/errors:
>> 
>> dtschema/dtc warnings/errors:
>> Documentation/devicetree/bindings/mmc/starfive,jh7110-sdio.example.dts:21:18: fatal error: dt-bindings/clock/starfive-jh7110.h: No such file or directory
>>    21 |         #include <dt-bindings/clock/starfive-jh7110.h>
>>       |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> Hello William,
> As with the other bindings that StarFive has sent out recently,
> including this header in the example creates a dependency on the
> clock/reset stuff being merged prior to the drivers for unrelated
> subsytems.
> To avoid that, you can drop the headers & definitions from these
> *examples* & use the numbers themselves instead.
> 
> That way, the only thing that depends on the clock binding headers is
> the DeviceTree patch & the driver can be merged once it is ready.
> 
> Thanks,
> Conor.
> 
Hi Conor,

Thank you for your suggestion. I will take it and fix it.

Best regards,
William Qiu

>> compilation terminated.
>> make[1]: *** [scripts/Makefile.lib:406: Documentation/devicetree/bindings/mmc/starfive,jh7110-sdio.example.dtb] Error 1
>> make[1]: *** Waiting for unfinished jobs....
>> make: *** [Makefile:1492: dt_binding_check] Error 2
>> 
>> doc reference errors (make refcheckdocs):
>> 
>> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221207131731.1291517-2-william.qiu@starfivetech.com
>> 
>> The base for the series is generally the latest rc1. A different dependency
>> should be noted in *this* patch.
>> 
>> If you already ran 'make dt_binding_check' and didn't see the above
>> error(s), then make sure 'yamllint' is installed and dt-schema is up to
>> date:
>> 
>> pip3 install dtschema --upgrade
>> 
>> Please check and re-submit after running the above command yourself. Note
>> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
>> your schema. However, it must be unset to test all examples with your schema.
>>