Re: [PATCH 4/4] arm64: dts: qcom: db820c: Add user LEDs

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 05/05/2022 05:27, Bjorn Andersson wrote:
> The db820c has 4 "user LEDs", all connected to the PMI8994. The first
> three are connected to the three current sinks provided by the TRILED
> and the fourth is connected to MPP2.
> 
> By utilizing the DTEST bus the MPP is fed the control signal from the
> fourth LPG block, providing a consistent interface to the user.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 56 +++++++++++++++++++++
>   1 file changed, 56 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> index 56e54ce4d10e..e9039e68a095 100644
> --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
> @@ -10,6 +10,7 @@
>   #include "pmi8994.dtsi"
>   #include <dt-bindings/input/input.h>
>   #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
>   #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>   #include <dt-bindings/sound/qcom,q6afe.h>
>   #include <dt-bindings/sound/qcom,q6asm.h>
> @@ -683,6 +684,61 @@ pinconf {
>   	};
>   };
>   
> +&pmi8994_lpg {
> +	qcom,power-source = <1>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pmi8994_mpp2_userled4>;
> +
> +	qcom,dtest = <0 0>,
> +		     <0 0>,
> +		     <0 0>,
> +		     <4 1>;
> +
> +	status = "okay";
> +
> +	led@1 {
> +		reg = <1>;
> +		color = <LED_COLOR_ID_GREEN>;
> +		function = LED_FUNCTION_HEARTBEAT;
> +		function-enumerator = <1>;
> +
> +		linux,default-trigger = "heartbeat";
> +		default-state = "on";
> +	};
> +
> +	led@2 {
> +		reg = <2>;
> +		color = <LED_COLOR_ID_GREEN>;
> +		function = LED_FUNCTION_HEARTBEAT;
> +		function-enumerator = <0>;
> +	};
> +
> +	led@3 {
> +		reg = <3>;
> +		color = <LED_COLOR_ID_GREEN>;
> +		function = LED_FUNCTION_HEARTBEAT;
> +		function-enumerator = <2>;
> +	};
> +
> +	led@4 {
> +		reg = <4>;
> +		color = <LED_COLOR_ID_GREEN>;
> +		function = LED_FUNCTION_HEARTBEAT;
> +		function-enumerator = <3>;
> +	};
> +};
> +
> +&pmi8994_mpps {
> +	pmi8994_mpp2_userled4: mpp2-userled4-state {
> +		pins = "mpp2";
> +		function = "sink";
> +
> +		output-low;
> +		qcom,dtest = <4>;
> +	};
> +};
> +
>   &pmi8994_spmi_regulators {
>   	vdd_s2-supply = <&vph_pwr>;
>   


-- 
With best wishes
Dmitry