Re: [PATCH v1 0/4] Temperature sensor support for StarFive JH7110 RISC-V SoC

[Hal Feng <hal.feng@starfivetech.com>]

On Fri, 6 Jan 2023 09:11:53 +0800, Hal Feng wrote:
> On Mon, 2 Jan 2023 17:56:01 -0800, Guenter Roeck wrote:
> > On Tue, Jan 03, 2023 at 09:31:41AM +0800, Hal Feng wrote:
> > > This patch series adds temperature sensor support for StarFive JH7110 SoC.
> > > The last two patches depend on series [1].
> > > 
> > > [1]: https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@starfivetech.com/
> > > 
> > > Emil Renner Berthing (4):
> > >   dt-bindings: hwmon: Add starfive,jh71x0-temp
> > >   hwmon: (sfctemp) Add StarFive JH71x0 temperature sensor
> > >   riscv: dts: starfive: jh7110: Add temperature sensor node
> > >   riscv: dts: starfive: visionfive-2: Add thermal-zones
> > > 
> > 
> > The hardware monitoring driver is obviously either the same
> > or derived from the previous series at
> > https://patchwork.kernel.org/project/linux-hwmon/list/?series=&submitter=&state=*&q=starfive
> > 
> > Why is this not submitted as v4 of the original series ?
> > What has changed, and what is the rationale for (re-)submitting
> > it as v1 ?
> 
> Sorry for the late reply. I feel sorry to say that I didn't know
> the submitting history of this patch series and Emil forgot to
> tell me maybe. After comparing with the previous series, I find
> the changes between this one and the previous one can be concluded
> as below.
> 
> Change log:
> - Added support for StarFive JH7110 SoC besides JH7100.
> - Added clock and reset support in dt-bindings and driver.
> - Added two patches for adding nodes in JH7110 and VisionFive 2 dts
>   which were being reviewed.
> 
> Thank you for your kindly reminding. I will resend this patch
> series as version 4 and add the change log.

I have resent this series as v4 [1]. Even though there are some issues
need to be discussed with Guenter, I wanna resend this series in advance
so that the v4 can be mostly synchronized with the latest patches [2] [3]
from Emil. The new change will be added in the v5.

[1] https://lore.kernel.org/all/20230207072314.62040-1-hal.feng@starfivetech.com/
[2] https://github.com/esmil/linux/commit/8c7f2f00105384390ee02d745b6ccb6637e28d25
[3] https://github.com/esmil/linux/commit/d04731cf0dc0462bc76afbadf95366ff0edbe642

Best regards,
Hal