Re: [PATCH v6 7/7] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add vision mezzanine

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 16/11/2022 17:28, Bryan O'Donoghue wrote:
> The Vision Mezzanine for the RB5 ships with an imx577 and ov9282 populated.
> Other sensors and components may be added or stacked with additional
> mezzanines.
> 
> Enable the IMX577 on the vision mezzanine.
> 
> An example media-ctl pipeline for the imx577 is:
> 
> media-ctl --reset
> media-ctl -v -d /dev/media0 -V '"imx577 '22-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> 
> yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/Makefile             |  1 +
>   .../dts/qcom/qrb5165-rb5-vision-mezzanine.dts | 62 +++++++++++++++++++
>   arch/arm64/boot/dts/qcom/sm8250.dtsi          | 33 ++++++++++
>   3 files changed, 96 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 4c81c1ee7f7c7..f5a76ec8a85e0 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
> new file mode 100644
> index 0000000000000..ac3ccab2da35e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
> @@ -0,0 +1,62 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Linaro Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "qrb5165-rb5.dts"
> +
> +&camcc {
> +	status = "okay";
> +};
> +
> +&camss {
> +	status = "okay";
> +	vdda-phy-supply = <&vreg_l5a_0p88>;
> +	vdda-pll-supply = <&vreg_l9a_1p2>;
Status goes last.

With this:
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> +
> +	ports {
> +		/* The port index denotes CSIPHY id i.e. csiphy2 */
> +		port@2 {
> +			csiphy2_ep: endpoint {
> +				clock-lanes = <7>;
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&imx577_ep>;
> +			};
> +		};
> +	};
> +};
> +
> +&cci1 {
> +	status = "okay";
> +};
> +
> +&cci1_i2c0 {
> +	camera@1a {
> +		compatible = "sony,imx577";
> +		reg = <0x1a>;
> +
> +		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
> +		pinctrl-names = "default", "suspend";
> +		pinctrl-0 = <&cam2_default>;
> +		pinctrl-1 = <&cam2_suspend>;
> +
> +		clocks = <&camcc CAM_CC_MCLK2_CLK>;
> +		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
> +		assigned-clock-rates = <24000000>;
> +
> +		dovdd-supply  = <&vreg_l7f_1p8>;
> +		avdd-supply = <&vdc_5v>;
> +		dvdd-supply = <&vdc_5v>;
> +
> +		port {
> +			imx577_ep: endpoint {
> +				clock-lanes = <1>;
> +				link-frequencies = /bits/ 64 <600000000>;
> +				data-lanes = <1 2 3 4>;
> +				remote-endpoint = <&csiphy2_ep>;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 806aa19ad93ce..d37694342b53f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3822,6 +3822,39 @@ tlmm: pinctrl@f100000 {
>   			gpio-ranges = <&tlmm 0 0 181>;
>   			wakeup-parent = <&pdc>;
>   
> +			cam2_default: cam2-default-state {
> +				rst-pins {
> +					pins = "gpio78";
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				mclk-pins {
> +					pins = "gpio96";
> +					function = "cam_mclk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +			};
> +
> +			cam2_suspend: cam2-suspend-state {
> +				rst-pins {
> +					pins = "gpio78";
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +					output-low;
> +				};
> +
> +				mclk-pins {
> +					pins = "gpio96";
> +					function = "cam_mclk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +			};
> +
>   			cci0_default: cci0-default-state {
>   				cci0_i2c0_default: cci0-i2c0-default-pins {
>   					/* SDA, SCL */